From patchwork Mon Nov 7 12:45:15 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kumaravel Thiagarajan X-Patchwork-Id: 622604 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 59D93C4332F for ; Mon, 7 Nov 2022 12:45:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232350AbiKGMpb (ORCPT ); Mon, 7 Nov 2022 07:45:31 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36804 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232354AbiKGMpZ (ORCPT ); Mon, 7 Nov 2022 07:45:25 -0500 Received: from esa.microchip.iphmx.com (esa.microchip.iphmx.com [68.232.154.123]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8CA811BEBF; Mon, 7 Nov 2022 04:45:22 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1667825123; x=1699361123; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=iclWdSWeHmbZFONaLI3RpASfF6KaujICDxZWOd46ABc=; b=jGqxcEf+W727PjqLkRYlZEHQtvW6zmMCl5vJRYRVGNm/W+cE2LrDaES1 ckMZZqZxHfMA2kEbzJRVc2nC/Ksq3QomHxfUcBVIZGuB5wC27hQw2JR0Q hfmTeDQKHbMnsBLTTLVDmYFmH4fvNwWXhe5EMMv6GSVUluLAfHMb/tlJP q3sltfWQSTJ1Ub4UsDWD4evJBD4o/X/1zpApcdRZmzxjdyjeu9BWGskbi FRvBstwqkxFK9CxVb+0FRCgqzbDrRNnRgMiDED2wH/K6zluJ0cTVILG52 0btNOrB7cakjFa7BtBv9oE77Jbw3k4x1nRMGXoyuICrAKsbbiS+h3tjFL A==; X-IronPort-AV: E=Sophos;i="5.96,143,1665471600"; d="scan'208";a="182255404" Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa4.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 07 Nov 2022 05:45:22 -0700 Received: from chn-vm-ex03.mchp-main.com (10.10.85.151) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.12; Mon, 7 Nov 2022 05:45:21 -0700 Received: from CHE-LT-UNGSOFTWARE.microchip.com (10.10.115.15) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server id 15.1.2507.12 via Frontend Transport; Mon, 7 Nov 2022 05:45:15 -0700 From: Kumaravel Thiagarajan To: , CC: , , , , , , , , , , , , , , , Subject: [PATCH v3 tty-next 1/3] 8250: microchip: pci1xxxx: Add driver for quad-uart support. Date: Mon, 7 Nov 2022 18:15:15 +0530 Message-ID: <20221107124517.1364484-2-kumaravel.thiagarajan@microchip.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221107124517.1364484-1-kumaravel.thiagarajan@microchip.com> References: <20221107124517.1364484-1-kumaravel.thiagarajan@microchip.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org pci1xxxx is a PCIe switch with a multi-function endpoint on one of its downstream ports. Quad-uart is one of the functions in the multi-function endpoint. This driver loads for the quad-uart and enumerates single or multiple instances of uart based on the PCIe subsystem device ID. Signed-off-by: Kumaravel Thiagarajan Signed-off-by: Tharun Kumar P --- Changes in v3: - Used NSEC_PER_SEC, HZ_PER_MHZ, FIELD_PREP, FIELD_GET MACROs wherever necessary - Handled failure case of serial8250_register_8250_port properly - Moved pci_setup_port to 8250_pcilib.c Changes in v2: - Use only the 62.5 MHz for baud clock. - Define custom implementation for get_divisor and set_divisor. - Use BOTHER instead of UPF_SPD_CUST for non standard baud rates (untested). - Correct indentation in clock divisor computation. - Remove unnecessary call to pci_save_state in probe function. - Fix null pointer dereference in probe function. - Move pci1xxxx_rs485_config to a separate patch. - Depends on SERIAL_8250_PCI & default to SERIAL_8250. - Change PORT_MCHP16550A to 100 from 124. --- MAINTAINERS | 7 + drivers/tty/serial/8250/8250_pci.c | 24 +- drivers/tty/serial/8250/8250_pci1xxxx.c | 370 ++++++++++++++++++++++++ drivers/tty/serial/8250/8250_pcilib.c | 31 ++ drivers/tty/serial/8250/8250_pcilib.h | 5 + drivers/tty/serial/8250/8250_port.c | 8 + drivers/tty/serial/8250/Kconfig | 15 + drivers/tty/serial/8250/Makefile | 2 + include/uapi/linux/serial_core.h | 3 + 9 files changed, 443 insertions(+), 22 deletions(-) create mode 100644 drivers/tty/serial/8250/8250_pci1xxxx.c create mode 100644 drivers/tty/serial/8250/8250_pcilib.c create mode 100644 drivers/tty/serial/8250/8250_pcilib.h diff --git a/MAINTAINERS b/MAINTAINERS index d30f26e07cd3..aa98deaba249 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13434,6 +13434,13 @@ F: Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml F: drivers/nvmem/microchip-otpc.c F: include/dt-bindings/nvmem/microchip,sama7g5-otpc.h +MICROCHIP PCIe UART DRIVER +M: Kumaravel Thiagarajan +M: Tharun Kumar P +L: linux-serial@vger.kernel.org +S: Maintained +F: drivers/tty/serial/8250/8250_pci1xxxx.c + MICROCHIP PWM DRIVER M: Claudiu Beznea L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 6f66dc2ebacc..e7023f1b9b2c 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -24,6 +24,7 @@ #include #include "8250.h" +#include "8250_pcilib.h" /* * init function returns: @@ -89,28 +90,7 @@ static int setup_port(struct serial_private *priv, struct uart_8250_port *port, u8 bar, unsigned int offset, int regshift) { - struct pci_dev *dev = priv->dev; - - if (bar >= PCI_STD_NUM_BARS) - return -EINVAL; - - if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { - if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev)) - return -ENOMEM; - - port->port.iotype = UPIO_MEM; - port->port.iobase = 0; - port->port.mapbase = pci_resource_start(dev, bar) + offset; - port->port.membase = pcim_iomap_table(dev)[bar] + offset; - port->port.regshift = regshift; - } else { - port->port.iotype = UPIO_PORT; - port->port.iobase = pci_resource_start(dev, bar) + offset; - port->port.mapbase = 0; - port->port.membase = NULL; - port->port.regshift = 0; - } - return 0; + return pci_setup_port(priv->dev, port, bar, offset, regshift); } /* diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c new file mode 100644 index 000000000000..e74e8d63daee --- /dev/null +++ b/drivers/tty/serial/8250/8250_pci1xxxx.c @@ -0,0 +1,370 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Probe module for 8250/16550-type MCHP PCI serial ports. + * + * Based on drivers/tty/serial/8250/8250_pci.c, + * + * Copyright (C) 2022 Microchip Technology Inc., All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" +#include "8250_pcilib.h" + +#define PCI_DEVICE_ID_EFAR_PCI12000 0xa002 +#define PCI_DEVICE_ID_EFAR_PCI11010 0xa012 +#define PCI_DEVICE_ID_EFAR_PCI11101 0xa022 +#define PCI_DEVICE_ID_EFAR_PCI11400 0xa032 +#define PCI_DEVICE_ID_EFAR_PCI11414 0xa042 + +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p 0x0001 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012 0x0002 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013 0x0003 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023 0x0004 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123 0x0005 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01 0x0006 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02 0x0007 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03 0x0008 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12 0x0009 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13 0x000a +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23 0x000b +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0 0x000c +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1 0x000d +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2 0x000e +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3 0x000f + +#define PCI_SUBDEVICE_ID_EFAR_PCI12000 0xa002 +#define PCI_SUBDEVICE_ID_EFAR_PCI11010 0xa012 +#define PCI_SUBDEVICE_ID_EFAR_PCI11101 0xa022 +#define PCI_SUBDEVICE_ID_EFAR_PCI11400 0xa032 +#define PCI_SUBDEVICE_ID_EFAR_PCI11414 0xa042 + +#define UART_ACTV_REG 0x11 +#define UART_BLOCK_SET_ACTIVE BIT(0) + +#define UART_PCI_CTRL_REG 0x80 +#define UART_PCI_CTRL_SET_MULTIPLE_MSI BIT(4) +#define UART_PCI_CTRL_D3_CLK_ENABLE BIT(0) + +#define ADCL_CFG_REG 0x40 +#define ADCL_CFG_POL_SEL BIT(2) +#define ADCL_CFG_PIN_SEL BIT(1) +#define ADCL_CFG_EN BIT(0) + +#define UART_BIT_SAMPLE_CNT 16 +#define BAUD_CLOCK_DIV_INT_MSK GENMASK(31, 8) +#define ADCL_CFG_RTS_DELAY_MASK GENMASK(11, 8) +#define UART_CLOCK_DEFAULT (62.5 * HZ_PER_MHZ) + +#define UART_WAKE_REG 0x8C +#define UART_WAKE_MASK_REG 0x90 +#define UART_WAKE_N_PIN BIT(2) +#define UART_WAKE_NCTS BIT(1) +#define UART_WAKE_INT BIT(0) +#define UART_WAKE_SRCS (UART_WAKE_N_PIN | UART_WAKE_NCTS | UART_WAKE_INT) + +#define UART_BAUD_CLK_DIVISOR_REG 0x54 + +#define UART_RESET_REG 0x94 +#define UART_RESET_D3_RESET_DISABLE BIT(16) + +struct pci1xxxx_8250 { + struct pci_dev *dev; + unsigned int nr; + void __iomem *membase; + int line[]; +}; + +static int pci1xxxx_get_num_ports(struct pci_dev *dev) +{ + switch (dev->subsystem_device) { + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23: + return 2; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023: + return 3; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p: + case PCI_SUBDEVICE_ID_EFAR_PCI11414: + return 4; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3: + default: + return 1; + } +} + +static unsigned int pci1xxxx_get_divisor(struct uart_port *port, + unsigned int baud, unsigned int *frac) +{ + unsigned int quot; + + /* + * Calculate baud rate sampling period in nanoseconds. + * Fractional part x denotes x/255 parts of a nanosecond. + */ + quot = (NSEC_PER_SEC / (baud * UART_BIT_SAMPLE_CNT)); + *frac = (((NSEC_PER_SEC - (quot * baud * UART_BIT_SAMPLE_CNT)) / + UART_BIT_SAMPLE_CNT) * 255) / baud; + + return quot; +} + +static void pci1xxxx_set_divisor(struct uart_port *port, unsigned int baud, + unsigned int quot, unsigned int frac) +{ + writel(FIELD_PREP(BAUD_CLOCK_DIV_INT_MSK, quot) | frac, + port->membase + UART_BAUD_CLK_DIVISOR_REG); +} + +static int pci1xxxx_setup(struct pci1xxxx_8250 *priv, + struct uart_8250_port *port, int idx) +{ + int first_offset; + int offset; + int ret; + + switch (priv->dev->subsystem_device) { + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123: + first_offset = 256; + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23: + first_offset = 512; + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3: + first_offset = 768; + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023: + if (idx > 0) + idx++; + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03: + if (idx > 0) + idx += 2; + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13: + first_offset = 256; + if (idx > 0) + idx++; + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013: + if (idx > 1) + idx++; + break; + default: + first_offset = 0; + break; + } + + offset = first_offset + idx * 256; + port->port.flags |= UPF_FIXED_TYPE | UPF_SKIP_TEST; + port->port.type = PORT_MCHP16550A; + port->port.set_termios = serial8250_do_set_termios; + port->port.get_divisor = pci1xxxx_get_divisor; + port->port.set_divisor = pci1xxxx_set_divisor; + ret = pci_setup_port(priv->dev, port, 0, offset, 0); + if (ret < 0) + return ret; + + writeb(UART_BLOCK_SET_ACTIVE, port->port.membase + UART_ACTV_REG); + writeb(UART_WAKE_SRCS, port->port.membase + UART_WAKE_REG); + writeb(UART_WAKE_N_PIN, port->port.membase + UART_WAKE_MASK_REG); + + return 0; +} + +static void pci1xxxx_irq_assign(struct pci1xxxx_8250 *priv, + struct uart_8250_port *uart, int idx) +{ + switch (priv->dev->subsystem_device) { + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1: + uart->port.irq = pci_irq_vector(priv->dev, 1); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2: + uart->port.irq = pci_irq_vector(priv->dev, 2); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3: + uart->port.irq = pci_irq_vector(priv->dev, 3); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01: + uart->port.irq = pci_irq_vector(priv->dev, idx); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02: + if (idx > 0) + idx++; + uart->port.irq = pci_irq_vector(priv->dev, idx); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03: + if (idx > 0) + idx += 2; + uart->port.irq = pci_irq_vector(priv->dev, idx); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12: + uart->port.irq = pci_irq_vector(priv->dev, idx + 1); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13: + if (idx > 0) + idx += 1; + uart->port.irq = pci_irq_vector(priv->dev, idx + 1); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23: + uart->port.irq = pci_irq_vector(priv->dev, idx + 2); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012: + uart->port.irq = pci_irq_vector(priv->dev, idx); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013: + if (idx > 1) + idx++; + uart->port.irq = pci_irq_vector(priv->dev, idx); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023: + if (idx > 0) + idx++; + uart->port.irq = pci_irq_vector(priv->dev, idx); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123: + uart->port.irq = pci_irq_vector(priv->dev, idx + 1); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p: + case PCI_SUBDEVICE_ID_EFAR_PCI11414: + uart->port.irq = pci_irq_vector(priv->dev, idx); + break; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0: + case PCI_SUBDEVICE_ID_EFAR_PCI12000: + case PCI_SUBDEVICE_ID_EFAR_PCI11010: + case PCI_SUBDEVICE_ID_EFAR_PCI11101: + case PCI_SUBDEVICE_ID_EFAR_PCI11400: + default: + uart->port.irq = pci_irq_vector(priv->dev, 0); + break; + } +} + +static int pci1xxxx_serial_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + unsigned int nr_ports, i, j; + struct pci1xxxx_8250 *priv; + struct uart_8250_port uart; + int num_vectors = 0; + int rc; + + rc = pcim_enable_device(dev); + if (rc) + return rc; + + nr_ports = pci1xxxx_get_num_ports(dev); + + priv = devm_kzalloc(&dev->dev, struct_size(priv, line, nr_ports), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->membase = pcim_iomap(dev, 0, 0); + priv->dev = dev; + priv->nr = nr_ports; + pci_set_master(dev); + + num_vectors = pci_alloc_irq_vectors(dev, 1, 4, PCI_IRQ_ALL_TYPES); + if (num_vectors < 0) + return num_vectors; + + memset(&uart, 0, sizeof(uart)); + uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT; + uart.port.uartclk = UART_CLOCK_DEFAULT; + uart.port.dev = &dev->dev; + + if (num_vectors == 4) + writeb(UART_PCI_CTRL_SET_MULTIPLE_MSI, + priv->membase + UART_PCI_CTRL_REG); + else + uart.port.irq = pci_irq_vector(dev, 0); + + for (i = 0; i < nr_ports; i++) { + if (num_vectors == 4) + pci1xxxx_irq_assign(priv, &uart, i); + + priv->line[i] = -ENOSPC; + rc = pci1xxxx_setup(priv, &uart, i); + if (rc) { + dev_err(&dev->dev, "Failed to setup port %u\n", i); + break; + } + priv->line[i] = serial8250_register_8250_port(&uart); + + if (priv->line[i] < 0) { + for (j = i + 1; j < nr_ports; j++) + priv->line[j] = -ENOSPC; + + dev_err(&dev->dev, + "Couldn't register serial port %lx, irq %d, type %d, error %d\n", + uart.port.iobase, uart.port.irq, + uart.port.iotype, priv->line[i]); + break; + } + } + + pci_set_drvdata(dev, priv); + + return 0; +} + +static void pci1xxxx_serial_remove(struct pci_dev *dev) +{ + struct pci1xxxx_8250 *priv = pci_get_drvdata(dev); + int i; + + for (i = 0; i < priv->nr; i++) { + if (priv->line[i] >= 0) + serial8250_unregister_port(priv->line[i]); + } +} + +static const struct pci_device_id pci1xxxx_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11010) }, + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11101) }, + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11400) }, + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI11414) }, + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_PCI12000) }, + {} +}; +MODULE_DEVICE_TABLE(pci, pci1xxxx_pci_tbl); + +static struct pci_driver pci1xxxx_pci_driver = { + .name = "pci1xxxx serial", + .probe = pci1xxxx_serial_probe, + .remove = pci1xxxx_serial_remove, + .id_table = pci1xxxx_pci_tbl, +}; + +module_pci_driver(pci1xxxx_pci_driver); + +MODULE_DESCRIPTION("Microchip Technology Inc. PCIe to UART module"); +MODULE_AUTHOR("Kumaravel Thiagarajan "); +MODULE_AUTHOR("Tharun Kumar P "); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_pcilib.c b/drivers/tty/serial/8250/8250_pcilib.c new file mode 100644 index 000000000000..07040781b43f --- /dev/null +++ b/drivers/tty/serial/8250/8250_pcilib.c @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Microchip pci1xxxx 8250 library. */ + +#include +#include "8250.h" + +int pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, + u8 bar, unsigned int offset, int regshift) +{ + if (bar >= PCI_STD_NUM_BARS) + return -EINVAL; + + if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { + if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev)) + return -ENOMEM; + + port->port.iotype = UPIO_MEM; + port->port.iobase = 0; + port->port.mapbase = pci_resource_start(dev, bar) + offset; + port->port.membase = pcim_iomap_table(dev)[bar] + offset; + port->port.regshift = regshift; + } else { + port->port.iotype = UPIO_PORT; + port->port.iobase = pci_resource_start(dev, bar) + offset; + port->port.mapbase = 0; + port->port.membase = NULL; + port->port.regshift = 0; + } + return 0; +} +EXPORT_SYMBOL_GPL(pci_setup_port); diff --git a/drivers/tty/serial/8250/8250_pcilib.h b/drivers/tty/serial/8250/8250_pcilib.h new file mode 100644 index 000000000000..c33b7eb44222 --- /dev/null +++ b/drivers/tty/serial/8250/8250_pcilib.h @@ -0,0 +1,5 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Microchip pci1xxxx 8250 library header file. */ + +int pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, u8 bar, + unsigned int offset, int regshift); diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 1d2a43214b48..ec2fe5fd7b02 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -313,6 +313,14 @@ static const struct serial8250_config uart_config[] = { .rxtrig_bytes = {1, 4, 8, 14}, .flags = UART_CAP_FIFO, }, + [PORT_MCHP16550A] = { + .name = "MCHP16550A", + .fifo_size = 256, + .tx_loadsz = 256, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01, + .rxtrig_bytes = {2, 66, 130, 194}, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index d0b49e15fbf5..f67542470eae 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -132,6 +132,7 @@ config SERIAL_8250_DMA config SERIAL_8250_PCI tristate "8250/16550 PCI device support" depends on SERIAL_8250 && PCI + select SERIAL_8250_PCILIB default SERIAL_8250 help This builds standard PCI serial support. You may be able to @@ -291,6 +292,17 @@ config SERIAL_8250_HUB6 To compile this driver as a module, choose M here: the module will be called 8250_hub6. +config SERIAL_8250_PCI1XXXX + tristate "Microchip 8250 based serial port" + depends on SERIAL_8250_PCI + select SERIAL_8250_PCILIB + default SERIAL_8250 + help + Select this option if you have a setup with Microchip PCIe + Switch with serial port enabled and wish to enable 8250 + serial driver for the serial interface. This driver support + will ensure to support baud rates upto 1.5Mpbs. + # # Misc. options/drivers. # @@ -500,6 +512,9 @@ config SERIAL_8250_MID Intel Medfield SOC and various other Intel platforms that is not covered by the more generic SERIAL_8250_PCI option. +config SERIAL_8250_PCILIB + bool + config SERIAL_8250_PERICOM tristate "Support for Pericom and Acces I/O serial ports" default SERIAL_8250 diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index bee908f99ea0..98202fdf39f8 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o 8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o 8250_base-$(CONFIG_SERIAL_8250_DWLIB) += 8250_dwlib.o 8250_base-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o +8250_base-$(CONFIG_SERIAL_8250_PCILIB) += 8250_pcilib.o obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o obj-$(CONFIG_SERIAL_8250_EXAR) += 8250_exar.o @@ -26,6 +27,7 @@ obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o +obj-$(CONFIG_SERIAL_8250_PCI1XXXX) += 8250_pci1xxxx.o obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 3ba34d8378bd..281fa286555c 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -207,6 +207,9 @@ /* Atheros AR933X SoC */ #define PORT_AR933X 99 +/* MCHP 16550A UART with 256 byte FIFOs */ +#define PORT_MCHP16550A 100 + /* ARC (Synopsys) on-chip UART */ #define PORT_ARC 101