From patchwork Thu Sep 29 14:44:00 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Marek Vasut X-Patchwork-Id: 610884 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 85442C433FE for ; Thu, 29 Sep 2022 14:44:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235111AbiI2OoZ (ORCPT ); Thu, 29 Sep 2022 10:44:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46954 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233904AbiI2OoX (ORCPT ); Thu, 29 Sep 2022 10:44:23 -0400 Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 009867A766 for ; Thu, 29 Sep 2022 07:44:19 -0700 (PDT) Received: from tr.lan (ip-86-49-12-201.bb.vodafone.cz [86.49.12.201]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) (Authenticated sender: marex@denx.de) by phobos.denx.de (Postfix) with ESMTPSA id 2E7D384964; Thu, 29 Sep 2022 16:44:17 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=denx.de; s=phobos-20191101; t=1664462657; bh=lZsVWdlDp87zr6YxO2r4mdR91XLTEDgddJ2RcHb0Od0=; h=From:To:Cc:Subject:Date:From; b=YJq6OoeeScGaiSZkJoLqDu561k5KGYxnTeWJtlKx9mBb9tRPsjIRBLfSrK2ift3vo +WiNSHOU4KtgfmAgV4dWHCgj62IHGyEpFO67lspee8Mz6lbAFxVw9U+qV0k/2hs1D1 AG6k3DUO8sUs8wetdnlbm2MSKRGWNwH/7VdsS77H8svgxrG3IxUd9/gsFldT7sqHnr r6QwcllaQNmIyYXm8oAU1ESuqHC1P1ZGVq5AwI7dCPzjmW0KUBSddrWqS8hm6JucCu UZmwvowgU1w/Tzw9mMla/EwJXinz5p7dY4gKBdln/fLjB56tuBLiKTIRnEorkLgYmh QDJrbO+Uc8nQQ== From: Marek Vasut To: linux-serial@vger.kernel.org Cc: Marek Vasut , Christoph Niedermaier , Fabio Estevam , Greg Kroah-Hartman , Jiri Slaby , NXP Linux Team , Peng Fan , Sascha Hauer , Shawn Guo , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , kernel@dh-electronics.com, kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2] tty: serial: imx: Handle RS485 DE signal active high Date: Thu, 29 Sep 2022 16:44:00 +0200 Message-Id: <20220929144400.13571-1-marex@denx.de> X-Mailer: git-send-email 2.35.1 MIME-Version: 1.0 X-Virus-Scanned: clamav-milter 0.103.6 at phobos.denx.de X-Virus-Status: Clean Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org The default polarity of RS485 DE signal is active high. This driver does not handle such case properly. Currently, when a pin is multiplexed as a UART CTS_B on boot, this pin is pulled HIGH by the i.MX UART CTS circuit, which activates DE signal on the RS485 transceiver and thus behave as if the RS485 was transmitting data, so the system blocks the RS485 bus when it starts and until user application takes over. This behavior is not OK. The problem consists of two separate parts. First, the i.MX UART IP requires UCR1 UARTEN and UCR2 RXEN to be set for UCR2 CTSC and CTS bits to have any effect. The UCR2 CTSC bit permits the driver to set CTS (RTS_B or RS485 DE signal) to either level sychronous to the internal UART IP clock. Compared to other options, like GPIO CTS control, this has the benefit of being synchronous to the UART IP clock and thus without glitches or bus delays. The reason for the CTS design is likely because when the Receiver is disabled, the UART IP can never indicate that it is ready to receive data by assering CTS signal, so the CTS is always pulled HIGH by default. When the port is closed by user space, imx_uart_stop_rx() clears UCR2 RXEN bit, and imx_uart_shutdown() clears UCR1 UARTEN bit. This disables UART Receiver and UART itself, and forces CTS signal HIGH, which leads to the RS485 bus being blocked because RS485 DE is incorrectly active. The proposed solution for this problem is to keep the Receiver running even after the port is closed, but in loopback mode. This disconnects the RX FIFO input from the RXD external signal, and since UCR2 TXEN is cleared, the UART Transmitter is disabled, so nothing can feed data in the RX FIFO. Because the Receiver is still enabled, the UCR2 CTSC and CTS bits still have effect and the CTS (RS485 DE) control is retained. Note that in case of RS485 DE signal active low, there is no problem and no special handling is necessary. The CTS signal defaults to HIGH, thus the RS485 is by default set to Receive and the bus is not blocked. Note that while there is the possibility to control CTS using GPIO with either CTS polarity, this has the downside of not being synchronous to the UART IP clock and thus glitchy and susceptible to slow DE switching. Second, on boot, before the UART driver probe callback is called, the driver core triggers pinctrl_init_done() and configures the IOMUXC to default state. At this point, UCR1 UARTEN and UCR2 RXEN are both still cleared, but UART CTS_B (RS485 DE) is configured as CTS function, thus the RTS signal is pulled HIGH by the UART IP CTS circuit. One part of the solution here is to enable UCR1 UARTEN and UCR2 RXEN and UTS loopback in this driver probe callback, thus unblocking the CTSC and CTS control early on. But this is still too late, since the pin control is already configured and CTS has been pulled HIGH for a short period of time. When Linux kernel boots and this driver is bound, the pin control is set to special "init" state if the state is available, and driver can switch the "default" state afterward when ready. This state can be used to set the CTS line as a GPIO in DT temporarily, and a GPIO hog can force such GPIO to LOW, thus keeping the RS485 DE line LOW early on boot. Once the driver takes over and UCR1 UARTEN and UCR2 RXEN and UTS loopback are all enabled, the driver can switch to "default" pin control state and control the CTS line as function instead. DT binding example is below: " &gpio6 { rts-init-hog { gpio-hog; gpios = <5 0>; output-low; line-name = "rs485-de"; }; }; &uart5 { /* DHCOM UART2 */ pinctrl-0 = <&pinctrl_uart5>; pinctrl-1 = <&pinctrl_uart5_init>; pinctrl-names = "default", "init"; ... }; pinctrl_uart5_init: uart5-init-grp { fsl,pins = < ... MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x30b1 >; }; pinctrl_uart5: uart5-grp { fsl,pins = < ... MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x30b1 >; }; " Tested-by: Christoph Niedermaier Signed-off-by: Marek Vasut Reviewed-by: Fabio Estevam Tested-by: Heiko Schocher --- Cc: Christoph Niedermaier Cc: Fabio Estevam Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: NXP Linux Team Cc: Peng Fan Cc: Sascha Hauer Cc: Shawn Guo Cc: Uwe Kleine-König Cc: kernel@dh-electronics.com Cc: kernel@pengutronix.de Cc: linux-arm-kernel@lists.infradead.org To: linux-serial@vger.kernel.org --- V2: - Add code comments per input from Uwe - Add TB from Christoph --- drivers/tty/serial/imx.c | 64 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 58 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 05b432dc7a85c..18f5da561f4a1 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -489,7 +489,7 @@ static void imx_uart_stop_tx(struct uart_port *port) static void imx_uart_stop_rx(struct uart_port *port) { struct imx_port *sport = (struct imx_port *)port; - u32 ucr1, ucr2, ucr4; + u32 ucr1, ucr2, ucr4, uts; ucr1 = imx_uart_readl(sport, UCR1); ucr2 = imx_uart_readl(sport, UCR2); @@ -505,7 +505,18 @@ static void imx_uart_stop_rx(struct uart_port *port) imx_uart_writel(sport, ucr1, UCR1); imx_uart_writel(sport, ucr4, UCR4); - ucr2 &= ~UCR2_RXEN; + /* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */ + if (port->rs485.flags & SER_RS485_ENABLED && + port->rs485.flags & SER_RS485_RTS_ON_SEND && + sport->have_rtscts && !sport->have_rtsgpio) { + uts = imx_uart_readl(sport, imx_uart_uts_reg(sport)); + uts |= UTS_LOOP; + imx_uart_writel(sport, uts, imx_uart_uts_reg(sport)); + ucr2 |= UCR2_RXEN; + } else { + ucr2 &= ~UCR2_RXEN; + } + imx_uart_writel(sport, ucr2, UCR2); } @@ -1393,7 +1404,7 @@ static int imx_uart_startup(struct uart_port *port) int retval, i; unsigned long flags; int dma_is_inited = 0; - u32 ucr1, ucr2, ucr3, ucr4; + u32 ucr1, ucr2, ucr3, ucr4, uts; retval = clk_prepare_enable(sport->clk_per); if (retval) @@ -1498,6 +1509,11 @@ static int imx_uart_startup(struct uart_port *port) imx_uart_writel(sport, ucr2, UCR2); } + /* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */ + uts = imx_uart_readl(sport, imx_uart_uts_reg(sport)); + uts &= ~UTS_LOOP; + imx_uart_writel(sport, uts, imx_uart_uts_reg(sport)); + spin_unlock_irqrestore(&sport->port.lock, flags); return 0; @@ -1507,7 +1523,7 @@ static void imx_uart_shutdown(struct uart_port *port) { struct imx_port *sport = (struct imx_port *)port; unsigned long flags; - u32 ucr1, ucr2, ucr4; + u32 ucr1, ucr2, ucr4, uts; if (sport->dma_is_enabled) { dmaengine_terminate_sync(sport->dma_chan_tx); @@ -1551,7 +1567,18 @@ static void imx_uart_shutdown(struct uart_port *port) spin_lock_irqsave(&sport->port.lock, flags); ucr1 = imx_uart_readl(sport, UCR1); - ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN | UCR1_RXDMAEN | UCR1_ATDMAEN); + ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_RXDMAEN | UCR1_ATDMAEN); + /* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */ + if (port->rs485.flags & SER_RS485_ENABLED && + port->rs485.flags & SER_RS485_RTS_ON_SEND && + sport->have_rtscts && !sport->have_rtsgpio) { + uts = imx_uart_readl(sport, imx_uart_uts_reg(sport)); + uts |= UTS_LOOP; + imx_uart_writel(sport, uts, imx_uart_uts_reg(sport)); + ucr1 |= UCR1_UARTEN; + } else { + ucr1 &= ~UCR1_UARTEN; + } imx_uart_writel(sport, ucr1, UCR1); ucr4 = imx_uart_readl(sport, UCR4); @@ -2213,7 +2240,7 @@ static int imx_uart_probe(struct platform_device *pdev) void __iomem *base; u32 dma_buf_conf[2]; int ret = 0; - u32 ucr1; + u32 ucr1, ucr2, uts; struct resource *res; int txirq, rxirq, rtsirq; @@ -2350,6 +2377,31 @@ static int imx_uart_probe(struct platform_device *pdev) ucr1 &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN | UCR1_RTSDEN); imx_uart_writel(sport, ucr1, UCR1); + /* + * In case RS485 is enabled without GPIO RTS control, the UART IP + * is used to control CTS signal. Keep both the UART and Receiver + * enabled, otherwise the UART IP pulls CTS signal always HIGH no + * matter how the UCR2 CTSC and CTS bits are set. To prevent any + * data from being fed into the RX FIFO, enable loopback mode in + * UTS register, which disconnects the RX path from external RXD + * pin and connects it to the Transceiver, which is disabled, so + * no data can be fed to the RX FIFO that way. + */ + if (sport->port.rs485.flags & SER_RS485_ENABLED && + sport->have_rtscts && !sport->have_rtsgpio) { + uts = imx_uart_readl(sport, imx_uart_uts_reg(sport)); + uts |= UTS_LOOP; + imx_uart_writel(sport, uts, imx_uart_uts_reg(sport)); + + ucr1 = imx_uart_readl(sport, UCR1); + ucr1 |= UCR1_UARTEN; + imx_uart_writel(sport, ucr1, UCR1); + + ucr2 = imx_uart_readl(sport, UCR2); + ucr2 |= UCR2_RXEN; + imx_uart_writel(sport, ucr2, UCR2); + } + if (!imx_uart_is_imx1(sport) && sport->dte_mode) { /* * The DCEDTE bit changes the direction of DSR, DCD, DTR and RI