@@ -19,6 +19,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/workqueue.h>
#include <linux/notifier.h>
#include <linux/slab.h>
@@ -37,6 +38,11 @@
/* DesignWare specific register fields */
#define DW_UART_MCR_SIRE BIT(6)
+/* Quirks */
+#define DW_UART_QUIRK_OCTEON BIT(0)
+#define DW_UART_QUIRK_ARMADA_38X BIT(1)
+#define DW_UART_QUIRK_SKIP_SET_RATE BIT(2)
+
static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb)
{
return container_of(nb, struct dw8250_data, clk_notifier);
@@ -366,6 +372,7 @@ static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
{
struct device_node *np = p->dev->of_node;
+ unsigned int quirks = data->pdata->quirks;
if (np) {
int id;
@@ -375,7 +382,7 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
if (id >= 0)
p->line = id;
#ifdef CONFIG_64BIT
- if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) {
+ if (quirks & DW_UART_QUIRK_OCTEON) {
p->serial_in = dw8250_serial_inq;
p->serial_out = dw8250_serial_outq;
p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
@@ -391,9 +398,9 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
p->serial_out = dw8250_serial_out32be;
}
- if (of_device_is_compatible(np, "marvell,armada-38x-uart"))
+ if (quirks & DW_UART_QUIRK_ARMADA_38X)
p->serial_out = dw8250_serial_out38x;
- if (of_device_is_compatible(np, "starfive,jh7100-uart"))
+ if (quirks & DW_UART_QUIRK_SKIP_SET_RATE)
p->set_termios = dw8250_do_set_termios;
} else if (acpi_dev_present("APMC0D08", NULL, -1)) {
@@ -456,6 +463,7 @@ static int dw8250_probe(struct platform_device *pdev)
data->data.dma.fn = dw8250_fallback_dma_filter;
data->usr_reg = DW_UART_USR;
+ data->pdata = device_get_match_data(p->dev);
p->private_data = &data->data;
data->uart_16550_compatible = device_property_read_bool(dev,
@@ -672,12 +680,30 @@ static const struct dev_pm_ops dw8250_pm_ops = {
SET_RUNTIME_PM_OPS(dw8250_runtime_suspend, dw8250_runtime_resume, NULL)
};
+static const struct dw8250_platform_data dw8250_dw_apb = {
+};
+
+static const struct dw8250_platform_data dw8250_octeon_3860_data = {
+ .quirks = DW_UART_QUIRK_OCTEON,
+};
+
+static const struct dw8250_platform_data dw8250_armada_38x_data = {
+ .quirks = DW_UART_QUIRK_ARMADA_38X,
+};
+
+static const struct dw8250_platform_data dw8250_renesas_rzn1_data = {
+};
+
+static const struct dw8250_platform_data dw8250_starfive_jh7100_data = {
+ .quirks = DW_UART_QUIRK_SKIP_SET_RATE,
+};
+
static const struct of_device_id dw8250_of_match[] = {
- { .compatible = "snps,dw-apb-uart" },
- { .compatible = "cavium,octeon-3860-uart" },
- { .compatible = "marvell,armada-38x-uart" },
- { .compatible = "renesas,rzn1-uart" },
- { .compatible = "starfive,jh7100-uart" },
+ { .compatible = "snps,dw-apb-uart", .data = &dw8250_dw_apb },
+ { .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data },
+ { .compatible = "marvell,armada-38x-uart", .data = &dw8250_armada_38x_data },
+ { .compatible = "renesas,rzn1-uart", .data = &dw8250_renesas_rzn1_data },
+ { .compatible = "starfive,jh7100-uart", .data = &dw8250_starfive_jh7100_data },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dw8250_of_match);
@@ -21,8 +21,13 @@ struct dw8250_port_data {
u8 dlf_size;
};
+struct dw8250_platform_data {
+ unsigned int quirks;
+};
+
struct dw8250_data {
struct dw8250_port_data data;
+ const struct dw8250_platform_data *pdata;
u8 usr_reg;
int msr_mask_on;