From patchwork Sun Mar 8 16:32:26 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Andreas_F=C3=A4rber?= X-Patchwork-Id: 214209 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.8 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C46E7C10F27 for ; Sun, 8 Mar 2020 16:32:56 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 8DA45208C3 for ; Sun, 8 Mar 2020 16:32:56 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726491AbgCHQcy (ORCPT ); Sun, 8 Mar 2020 12:32:54 -0400 Received: from mx2.suse.de ([195.135.220.15]:44926 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726446AbgCHQcw (ORCPT ); Sun, 8 Mar 2020 12:32:52 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id D376DB1ED; Sun, 8 Mar 2020 16:32:49 +0000 (UTC) From: =?utf-8?q?Andreas_F=C3=A4rber?= To: linux-arm-kernel@lists.infradead.org Cc: =?utf-8?b?V2VsbHMgTHUg5ZGC6Iqz6aiw?= , Dvorkin Dmitry , linux-kernel@vger.kernel.org, =?utf-8?q?Andreas_F=C3=A4rber?= , Greg Kroah-Hartman , Jiri Slaby , linux-serial@vger.kernel.org Subject: [RFC 08/11] tty: serial: sunplus: Implement full UART driver Date: Sun, 8 Mar 2020 17:32:26 +0100 Message-Id: <20200308163230.4002-9-afaerber@suse.de> X-Mailer: git-send-email 2.16.4 In-Reply-To: <20200308163230.4002-1-afaerber@suse.de> References: <20200308163230.4002-1-afaerber@suse.de> MIME-Version: 1.0 Sender: linux-serial-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org Signed-off-by: Andreas Färber --- drivers/tty/serial/Kconfig | 4 +- drivers/tty/serial/sunplus-uart.c | 680 ++++++++++++++++++++++++++++++++++++++ include/uapi/linux/serial_core.h | 3 + 3 files changed, 685 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index ac6dce75c2f3..a178500a6bb5 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1563,7 +1563,7 @@ config SERIAL_MILBEAUT_USIO_CONSOLE single user mode). config SERIAL_PLUS1 - bool "Sunplus Plus1 serial port support" + tristate "Sunplus Plus1 serial port support" depends on ARCH_SUNPLUS || COMPILE_TEST select SERIAL_CORE help @@ -1579,7 +1579,7 @@ config SERIAL_PLUS1_CONSOLE default y help Say 'Y' here if you wish to use Sunplus SP7021 UART - as the system console. Only earlycon is implemented currently. + as the system console. endmenu diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c index 959dfab5e07b..9b9442acde9a 100644 --- a/drivers/tty/serial/sunplus-uart.c +++ b/drivers/tty/serial/sunplus-uart.c @@ -4,6 +4,7 @@ */ #include +#include #include #include #include @@ -11,11 +12,71 @@ #include #include #include +#include +#include + +#define PLUS1_UART_PORT_NUM 5 +#define PLUS1_UART_DEV_NAME "ttySP" #define REG_DATA 0x00 #define REG_LSR 0x04 +#define REG_MSR 0x08 +#define REG_LCR 0x0c +#define REG_MCR 0x10 +#define REG_DIV_L 0x14 +#define REG_DIV_H 0x18 +#define REG_ISC 0x1c +#define REG_TX_RESIDUE 0x20 +#define REG_RX_RESIDUE 0x24 +#define REG_RX_THRESHOLD 0x28 +#define REG_CLK_SRC 0x2c #define PLUS1_UART_LSR_TX BIT(0) +#define PLUS1_UART_LSR_RX BIT(1) +#define PLUS1_UART_LSR_PE BIT(2) +#define PLUS1_UART_LSR_OE BIT(3) +#define PLUS1_UART_LSR_FE BIT(4) +#define PLUS1_UART_LSR_BC BIT(5) +#define PLUS1_UART_LSR_TXE BIT(6) + +#define PLUS1_UART_LCR_WL_MASK GENMASK(1, 0) +#define PLUS1_UART_LCR_WL5 (0x0 << 0) +#define PLUS1_UART_LCR_WL6 (0x1 << 0) +#define PLUS1_UART_LCR_WL7 (0x2 << 0) +#define PLUS1_UART_LCR_WL8 (0x3 << 0) +#define PLUS1_UART_LCR_ST BIT(2) +#define PLUS1_UART_LCR_PE BIT(3) +#define PLUS1_UART_LCR_PR BIT(4) +#define PLUS1_UART_LCR_BC BIT(5) + +#define PLUS1_UART_MCR_DTS BIT(0) +#define PLUS1_UART_MCR_RTS BIT(1) +#define PLUS1_UART_MCR_DCD BIT(2) +#define PLUS1_UART_MCR_RI BIT(3) +#define PLUS1_UART_MCR_LB BIT(4) +#define PLUS1_UART_MCR_AR BIT(5) +#define PLUS1_UART_MCR_AC BIT(6) +#define PLUS1_UART_MCR_AT BIT(7) + +#define PLUS1_UART_ISC_TX BIT(0) +#define PLUS1_UART_ISC_RX BIT(1) +#define PLUS1_UART_ISC_LS BIT(2) +#define PLUS1_UART_ISC_MS BIT(3) +#define PLUS1_UART_ISC_TXM BIT(4) +#define PLUS1_UART_ISC_RXM BIT(5) +#define PLUS1_UART_ISC_LSM BIT(6) +#define PLUS1_UART_ISC_MSM BIT(7) + +static struct uart_driver plus1_uart_driver; + +struct plus1_uart_port { + struct uart_port port; + struct clk *clk; +}; + +#define to_plus1_uart_port(prt) container_of(prt, struct plus1_uart_port, prt) + +static struct plus1_uart_port *plus1_uart_ports[PLUS1_UART_PORT_NUM]; static inline void plus1_uart_write(struct uart_port *port, unsigned int off, u32 val) { @@ -27,6 +88,447 @@ static inline u32 plus1_uart_read(struct uart_port *port, unsigned int off) return readl_relaxed(port->membase + off); } +static void plus1_uart_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + u32 lcr; + + spin_lock_irqsave(&port->lock, flags); + + lcr = plus1_uart_read(port, REG_LCR); + if (ctl) + lcr |= PLUS1_UART_LCR_BC; + else + lcr &= ~PLUS1_UART_LCR_BC; + plus1_uart_write(port, REG_LCR, lcr); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void plus1_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 mcr; + + mcr = plus1_uart_read(port, REG_MCR); + + if (mctrl & TIOCM_DTR) + mcr |= PLUS1_UART_MCR_DTS; + else + mcr &= ~PLUS1_UART_MCR_DTS; + + if (mctrl & TIOCM_RTS) + mcr |= PLUS1_UART_MCR_RTS; + else + mcr &= ~PLUS1_UART_MCR_RTS; + + if (mctrl & TIOCM_CAR) + mcr |= PLUS1_UART_MCR_DCD; + else + mcr &= ~PLUS1_UART_MCR_DCD; + + if (mctrl & TIOCM_RI) + mcr |= PLUS1_UART_MCR_RI; + else + mcr &= ~PLUS1_UART_MCR_RI; + + if (mctrl & TIOCM_LOOP) + mcr |= PLUS1_UART_MCR_LB; + else + mcr &= ~PLUS1_UART_MCR_LB; + + plus1_uart_write(port, REG_MCR, mcr); +} + +static unsigned int plus1_uart_get_mctrl(struct uart_port *port) +{ + unsigned int mctrl = 0; + u32 mcr; + + mcr = plus1_uart_read(port, REG_MCR); + if (mcr & PLUS1_UART_MCR_DTS) + mctrl |= TIOCM_DTR; + if (mcr & PLUS1_UART_MCR_RTS) + mctrl |= TIOCM_RTS; + if (mcr & PLUS1_UART_MCR_DCD) + mctrl |= TIOCM_CAR; + if (mcr & PLUS1_UART_MCR_RI) + mctrl |= TIOCM_RI; + if (mcr & PLUS1_UART_MCR_LB) + mctrl |= TIOCM_LOOP; + if (mcr & PLUS1_UART_MCR_AC) + mctrl |= TIOCM_CTS; + return mctrl; +} + +static unsigned int plus1_uart_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned int ret; + u32 lsr; + + spin_lock_irqsave(&port->lock, flags); + + lsr = plus1_uart_read(port, REG_LSR); + ret = (lsr & PLUS1_UART_LSR_TXE) ? TIOCSER_TEMT : 0; + + spin_unlock_irqrestore(&port->lock, flags); + + return ret; +} + +static void plus1_uart_stop_rx(struct uart_port *port) +{ + u32 isc; + + isc = plus1_uart_read(port, REG_ISC); + isc &= ~PLUS1_UART_ISC_RXM; + plus1_uart_write(port, REG_ISC, isc); +} + +static void plus1_uart_stop_tx(struct uart_port *port) +{ + u32 isc; + + isc = plus1_uart_read(port, REG_ISC); + isc &= ~PLUS1_UART_ISC_TXM; + plus1_uart_write(port, REG_ISC, isc); +} + +static void plus1_uart_start_tx(struct uart_port *port) +{ + u32 isc; + + if (uart_tx_stopped(port)) { + plus1_uart_stop_tx(port); + return; + } + + isc = plus1_uart_read(port, REG_ISC); + isc |= PLUS1_UART_ISC_TXM; + plus1_uart_write(port, REG_ISC, isc); +} + +static void plus1_uart_send_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int ch; + + if (uart_tx_stopped(port)) + return; + + if (port->x_char) { + //while (!(plus1_uart_read(port, REG_LSR) & PLUS1_UART_LSR_TX)) + // cpu_relax(); + plus1_uart_write(port, REG_DATA, port->x_char); + port->icount.tx++; + port->x_char = 0; + } + + while (plus1_uart_read(port, REG_LSR) & PLUS1_UART_LSR_TX) { + if (uart_circ_empty(xmit)) + break; + + ch = xmit->buf[xmit->tail]; + plus1_uart_write(port, REG_DATA, ch); + xmit->tail = (xmit->tail + 1) & (SERIAL_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + plus1_uart_stop_tx(port); +} + +static void plus1_uart_receive_chars(struct uart_port *port) +{ + u32 lsr, val; + + lsr = plus1_uart_read(port, REG_LSR); + while (lsr & PLUS1_UART_LSR_RX) { + char flag = TTY_NORMAL; + + if (lsr & PLUS1_UART_LSR_OE) + port->icount.overrun++; + + if (lsr & PLUS1_UART_LSR_BC) { + port->icount.brk++; + flag = TTY_BREAK; + } else if (lsr & PLUS1_UART_LSR_PE) { + port->icount.parity++; + flag = TTY_PARITY; + } else if (lsr & PLUS1_UART_LSR_FE) { + port->icount.frame++; + + lsr &= port->read_status_mask; + if (lsr & PLUS1_UART_LSR_FE) + flag = TTY_PARITY; + } else + port->icount.rx++; + + val = plus1_uart_read(port, REG_DATA); + val &= 0xff; + + if ((lsr & port->ignore_status_mask) == 0) + tty_insert_flip_char(&port->state->port, val, flag); + + lsr = plus1_uart_read(port, REG_LSR); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); +} + +static irqreturn_t plus1_uart_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long flags; + u32 isc; + + spin_lock_irqsave(&port->lock, flags); + + isc = plus1_uart_read(port, REG_ISC); + if (isc & PLUS1_UART_ISC_RX) + plus1_uart_receive_chars(port); + + isc = plus1_uart_read(port, REG_ISC); + if (isc & PLUS1_UART_ISC_TX) + plus1_uart_send_chars(port); + + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +static void plus1_uart_shutdown(struct uart_port *port) +{ + unsigned long flags; + u32 mcr; + + spin_lock_irqsave(&port->lock, flags); + + plus1_uart_write(port, REG_ISC, 0); + + mcr = plus1_uart_read(port, REG_MCR); + mcr &= ~PLUS1_UART_MCR_AC; + plus1_uart_write(port, REG_MCR, mcr); + + spin_unlock_irqrestore(&port->lock, flags); + + free_irq(port->irq, port); +} + +static int plus1_uart_startup(struct uart_port *port) +{ + unsigned long flags; + int ret; + + ret = request_irq(port->irq, plus1_uart_irq, IRQF_TRIGGER_NONE, + "plus1-uart", port); + if (ret) + return ret; + + spin_lock_irqsave(&port->lock, flags); + + plus1_uart_write(port, REG_ISC, PLUS1_UART_ISC_RXM); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void plus1_uart_change_baudrate(struct plus1_uart_port *sp_port, + unsigned long baud) +{ + struct uart_port *port = &sp_port->port; + unsigned int clk; + unsigned int div, ext; + + plus1_uart_write(port, REG_CLK_SRC, (baud > 115200) ? 0 : BIT(0)); + if (baud > 115200) + clk = 202500000; + else + clk = port->uartclk; + clk += baud >> 1; + div = clk / baud; + ext = div & 0xf; + div >>= 4; + div--; + plus1_uart_write(port, REG_DIV_L, (ext << 12) | (div & 0xff)); + plus1_uart_write(port, REG_DIV_H, div >> 8); +} + +static void plus1_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct plus1_uart_port *sp_port = to_plus1_uart_port(port); + unsigned int baud; + u32 lcr, mcr; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + lcr = plus1_uart_read(port, REG_LCR); + + lcr &= ~PLUS1_UART_LCR_WL_MASK; + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr |= PLUS1_UART_LCR_WL5; + break; + case CS6: + lcr |= PLUS1_UART_LCR_WL6; + break; + case CS7: + lcr |= PLUS1_UART_LCR_WL7; + break; + case CS8: + default: + lcr |= PLUS1_UART_LCR_WL8; + break; + } + + if (termios->c_cflag & CSTOPB) + lcr |= PLUS1_UART_LCR_ST; + else + lcr &= ~PLUS1_UART_LCR_ST; + + if (termios->c_cflag & PARENB) { + lcr |= PLUS1_UART_LCR_PE; + } else + lcr &= ~PLUS1_UART_LCR_PE; + + if ((termios->c_cflag & PARENB) && !(termios->c_cflag & PARODD)) + lcr |= PLUS1_UART_LCR_PR; + else + lcr &= ~PLUS1_UART_LCR_PR; + + plus1_uart_write(port, REG_LCR, lcr); + + mcr = plus1_uart_read(port, REG_MCR); + + if (termios->c_cflag & CRTSCTS) + mcr |= PLUS1_UART_MCR_AC | PLUS1_UART_MCR_AR; + else + mcr &= ~(PLUS1_UART_MCR_AC | PLUS1_UART_MCR_AR); + + plus1_uart_write(port, REG_MCR, mcr); + + baud = uart_get_baud_rate(port, termios, old, 0, 202500000 >> 4); + plus1_uart_change_baudrate(sp_port, baud); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + port->read_status_mask = 0; + if (termios->c_iflag & INPCK) + port->read_status_mask |= PLUS1_UART_LSR_PE | PLUS1_UART_LSR_FE; + if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK)) + port->read_status_mask |= PLUS1_UART_LSR_BC; + + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= PLUS1_UART_LSR_PE | PLUS1_UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= PLUS1_UART_LSR_BC; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= PLUS1_UART_LSR_OE; + } + + if (!(termios->c_cflag & CREAD)) + plus1_uart_write(port, REG_RX_RESIDUE, 0); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void plus1_uart_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return; + + if (port->flags & UPF_IOREMAP) { + devm_release_mem_region(port->dev, port->mapbase, + resource_size(res)); + devm_iounmap(port->dev, port->membase); + port->membase = NULL; + } +} + +static int plus1_uart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + if (!devm_request_mem_region(port->dev, port->mapbase, + resource_size(res), dev_name(port->dev))) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = devm_ioremap(port->dev, port->mapbase, + resource_size(res)); + if (!port->membase) + return -EBUSY; + } + + return 0; +} + +static const char *plus1_uart_type(struct uart_port *port) +{ + return (port->type == PORT_PLUS1) ? "plus1-uart" : NULL; +} + +static int plus1_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (port->type != PORT_PLUS1) + return -EINVAL; + + if (port->irq != ser->irq) + return -EINVAL; + + return 0; +} + +static void plus1_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_PLUS1; + plus1_uart_request_port(port); + } +} + +static const struct uart_ops plus1_uart_ops = { + .break_ctl = plus1_uart_break_ctl, + .set_mctrl = plus1_uart_set_mctrl, + .get_mctrl = plus1_uart_get_mctrl, + .tx_empty = plus1_uart_tx_empty, + .start_tx = plus1_uart_start_tx, + .stop_rx = plus1_uart_stop_rx, + .stop_tx = plus1_uart_stop_tx, + .startup = plus1_uart_startup, + .shutdown = plus1_uart_shutdown, + .set_termios = plus1_uart_set_termios, + .type = plus1_uart_type, + .config_port = plus1_uart_config_port, + .request_port = plus1_uart_request_port, + .release_port = plus1_uart_release_port, + .verify_port = plus1_uart_verify_port, +}; + #ifdef CONFIG_SERIAL_PLUS1_CONSOLE static void plus1_console_putchar(struct uart_port *port, int ch) @@ -65,6 +567,57 @@ static void plus1_uart_port_write(struct uart_port *port, const char *s, local_irq_restore(flags); } +static void plus1_uart_console_write(struct console *co, const char *s, + u_int count) +{ + struct plus1_uart_port *sp_port; + + sp_port = plus1_uart_ports[co->index]; + if (!sp_port) + return; + + plus1_uart_port_write(&sp_port->port, s, count); +} + +static int plus1_uart_console_setup(struct console *co, char *options) +{ + struct plus1_uart_port *sp_port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= PLUS1_UART_PORT_NUM) + return -EINVAL; + + sp_port = plus1_uart_ports[co->index]; + if (!sp_port || !sp_port->port.membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&sp_port->port, co, baud, parity, bits, flow); +} + +static struct console plus1_uart_console = { + .name = PLUS1_UART_DEV_NAME, + .write = plus1_uart_console_write, + .device = uart_console_device, + .setup = plus1_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &plus1_uart_driver, +}; + +static int __init plus1_uart_console_init(void) +{ + register_console(&plus1_uart_console); + + return 0; +} +console_initcall(plus1_uart_console_init); + static void plus1_uart_early_console_write(struct console *co, const char *s, u_int count) @@ -87,4 +640,131 @@ plus1_uart_early_console_setup(struct earlycon_device *device, const char *opt) OF_EARLYCON_DECLARE(sunplus, "sunplus,sp7021-uart", plus1_uart_early_console_setup); +#define PLUS1_UART_CONSOLE (&plus1_uart_console) +#else +#define PLUS1_UART_CONSOLE NULL #endif + +static struct uart_driver plus1_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "plus1-uart", + .dev_name = PLUS1_UART_DEV_NAME, + .nr = PLUS1_UART_PORT_NUM, + .cons = PLUS1_UART_CONSOLE, +}; + +static int plus1_uart_probe(struct platform_device *pdev) +{ + struct resource *res_mem; + struct plus1_uart_port *sp_port; + int ret, irq; + + if (pdev->dev.of_node) + pdev->id = of_alias_get_id(pdev->dev.of_node, "serial"); + + if (pdev->id < 0 || pdev->id >= PLUS1_UART_PORT_NUM) { + dev_err(&pdev->dev, "id %d out of range\n", pdev->id); + return -EINVAL; + } + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) { + dev_err(&pdev->dev, "could not get mem\n"); + return -ENODEV; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + if (plus1_uart_ports[pdev->id]) { + dev_err(&pdev->dev, "port %d already allocated\n", pdev->id); + return -EBUSY; + } + + sp_port = devm_kzalloc(&pdev->dev, sizeof(*sp_port), GFP_KERNEL); + if (!sp_port) + return -ENOMEM; + + sp_port->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(sp_port->clk)) { + dev_err(&pdev->dev, "could not get clk\n"); + return PTR_ERR(sp_port->clk); + } + + sp_port->port.dev = &pdev->dev; + sp_port->port.line = pdev->id; + sp_port->port.type = PORT_PLUS1; + sp_port->port.iotype = UPIO_MEM; + sp_port->port.mapbase = res_mem->start; + sp_port->port.irq = irq; + sp_port->port.uartclk = clk_get_rate(sp_port->clk); + if (sp_port->port.uartclk == 0) { + dev_err(&pdev->dev, "clock rate is zero\n"); + return -EINVAL; + } + sp_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY; + sp_port->port.x_char = 0; + sp_port->port.fifosize = 16; + sp_port->port.ops = &plus1_uart_ops; + + plus1_uart_ports[pdev->id] = sp_port; + platform_set_drvdata(pdev, sp_port); + + ret = uart_add_one_port(&plus1_uart_driver, &sp_port->port); + if (ret) + plus1_uart_ports[pdev->id] = NULL; + + return ret; +} + +static int plus1_uart_remove(struct platform_device *pdev) +{ + struct plus1_uart_port *sp_port = platform_get_drvdata(pdev); + + uart_remove_one_port(&plus1_uart_driver, &sp_port->port); + plus1_uart_ports[pdev->id] = NULL; + + return 0; +} + +static const struct of_device_id plus1_uart_dt_matches[] = { + { .compatible = "sunplus,sp7021-uart" }, + { } +}; +MODULE_DEVICE_TABLE(of, plus1_uart_dt_matches); + +static struct platform_driver plus1_uart_platform_driver = { + .probe = plus1_uart_probe, + .remove = plus1_uart_remove, + .driver = { + .name = "plus1-uart", + .of_match_table = plus1_uart_dt_matches, + }, +}; + +static int __init plus1_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&plus1_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&plus1_uart_platform_driver); + if (ret) + uart_unregister_driver(&plus1_uart_driver); + + return ret; +} + +static void __exit plus1_uart_exit(void) +{ + platform_driver_unregister(&plus1_uart_platform_driver); + uart_unregister_driver(&plus1_uart_driver); +} + +module_init(plus1_uart_init); +module_exit(plus1_uart_exit); + +MODULE_LICENSE("GPL"); diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 8ec3dd742ea4..54c611b06735 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -293,4 +293,7 @@ /* Freescale LINFlexD UART */ #define PORT_LINFLEXUART 122 +/* SunPlus Plus1 UART */ +#define PORT_PLUS1 123 + #endif /* _UAPILINUX_SERIAL_CORE_H */