From patchwork Mon Feb 15 12:13:12 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jun Nie X-Patchwork-Id: 61929 Delivered-To: patch@linaro.org Received: by 10.112.43.199 with SMTP id y7csp1030445lbl; Mon, 15 Feb 2016 04:13:55 -0800 (PST) X-Received: by 10.66.141.71 with SMTP id rm7mr23018796pab.106.1455538435306; Mon, 15 Feb 2016 04:13:55 -0800 (PST) Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id c74si43160518pfj.65.2016.02.15.04.13.55; Mon, 15 Feb 2016 04:13:55 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-serial-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-serial-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-serial-owner@vger.kernel.org; dkim=neutral (body hash did not verify) header.i=@linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752999AbcBOMNy (ORCPT + 1 other); Mon, 15 Feb 2016 07:13:54 -0500 Received: from mail-pa0-f54.google.com ([209.85.220.54]:33745 "EHLO mail-pa0-f54.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752986AbcBOMNx (ORCPT ); Mon, 15 Feb 2016 07:13:53 -0500 Received: by mail-pa0-f54.google.com with SMTP id fl4so73423549pad.0 for ; Mon, 15 Feb 2016 04:13:53 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id; bh=iQYupPIphVDEwlMHYkd+lacoorljYr3o8OnzMQW9Iqc=; b=BQEaccO9sahSFFd2hsjz1AOYnpbGTuV3HQy3um6xpMUzan3GaKTJrjSFhVUkfu2/kQ iLQ24X9xGVTG/uHA13NsCsoF3VttUY2WeSZLG1WF9QZao01UYD29cfoa+1sWg6Rd/tOb lFJuvAND0aSg7VnyhNj/A7aYxftI6mdQ2XdkE= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id; bh=iQYupPIphVDEwlMHYkd+lacoorljYr3o8OnzMQW9Iqc=; b=KxS+W7xLZE9o80W8FS2xLNxCdCFKACNIWJiwehOiPgBX/KJdBVSXISRcJBgPevrmRN WVzoFILOFtwFXBl1EmoQ786SyezjA0wXSqUDYpYJ+qXA1kgxe3qPPjiL5ebKv9KAuOsY ek9DisinwortoVf7reFbiHF8IVgjKh4cCIE05sDBxrniizrRIrL5+ScKxQucxdrPa+5l UkRVgJYybpvlSQ+2Jt5uA9oRB5SFn3xtbvw1CJ4Nklp0GCkzrnJTxTzXkUnTdGxFWiRm dM4lPy4UVKPZxnAhTpl84OmxI/QhTUi5q4jQbfpxOExMD9pHAvvZlRPUaWl3AeY65RQc dT4w== X-Gm-Message-State: AG10YOQS1xC2oW1qMOqkKhD7ezU0c2PqBt1jFmMlxm0R0653rPqnHOq9IrGHsB7iOzQHaO4K X-Received: by 10.66.155.170 with SMTP id vx10mr22696579pab.73.1455538432872; Mon, 15 Feb 2016 04:13:52 -0800 (PST) Received: from localhost.localdomain (us1.aimitrade.com. [173.255.218.183]) by smtp.gmail.com with ESMTPSA id 76sm38242346pft.44.2016.02.15.04.13.46 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Mon, 15 Feb 2016 04:13:51 -0800 (PST) From: Jun Nie To: andre.przywara@arm.com, timur@codeaurora.org, linux@arm.linux.org.uk, graeme.gregory@linaro.org, peter@hurleysoftware.com, linux-arm-kernel@lists.infradead.org, linux-serial@vger.kernel.org, shawn.guo@linaro.org Cc: jason.liu@linaro.org, Jun Nie Subject: [PATCH 1/3] serial: amba-pl011: make platform driver generic Date: Mon, 15 Feb 2016 20:13:12 +0800 Message-Id: <1455538393-7038-1-git-send-email-jun.nie@linaro.org> X-Mailer: git-send-email 1.9.1 Sender: linux-serial-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org make sbsa uart platform driver more generic so that platform driver code can be reused by ZTE uart platform driver. Signed-off-by: Jun Nie --- drivers/tty/serial/amba-pl011.c | 57 +++++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 19 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 500232a..f52a243 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -73,6 +73,9 @@ #define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) #define UART_DUMMY_DR_RX (1 << 16) +static const struct uart_ops amba_pl011_pops; +static const struct uart_ops sbsa_uart_pops; + static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { [REG_DR] = UART01x_DR, [REG_FR] = UART01x_FR, @@ -92,6 +95,7 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { /* There is by now at least one vendor with differing details, so handle it */ struct vendor_data { const u16 *reg_offset; + const struct uart_ops *uart_pops; unsigned int ifls; bool access_32b; bool oversampling; @@ -119,13 +123,20 @@ static struct vendor_data vendor_arm = { .get_fifosize = get_fifosize_arm, }; +static unsigned int get_fifosize_sbsa(struct amba_device *dev) +{ + return 32; +} + static struct vendor_data vendor_sbsa = { .reg_offset = pl011_std_offsets, + .uart_pops = &sbsa_uart_pops, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, .always_enabled = true, .fixed_options = true, + .get_fifosize = get_fifosize_sbsa, }; static u16 pl011_st_offsets[REG_ARRAY_SIZE] = { @@ -189,6 +200,7 @@ static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = { static struct vendor_data vendor_zte __maybe_unused = { .reg_offset = pl011_zte_offsets, + .uart_pops = &amba_pl011_pops, .access_32b = true, .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, .get_fifosize = get_fifosize_arm, @@ -2084,7 +2096,7 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) return ret; } -static struct uart_ops amba_pl011_pops = { +static const struct uart_ops amba_pl011_pops = { .tx_empty = pl011_tx_empty, .set_mctrl = pl011_set_mctrl, .get_mctrl = pl011_get_mctrl, @@ -2519,10 +2531,12 @@ static int pl011_resume(struct device *dev) #endif static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume); +static const struct of_device_id pl011_uart_plat_of_match[]; -static int sbsa_uart_probe(struct platform_device *pdev) +static int pl011_uart_plat_probe(struct platform_device *pdev) { struct uart_amba_port *uap; + struct vendor_data *vendor; struct resource *r; int portnr, ret; int baudrate; @@ -2533,11 +2547,15 @@ static int sbsa_uart_probe(struct platform_device *pdev) */ if (pdev->dev.of_node) { struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_id = + of_match_device(pl011_uart_plat_of_match, &pdev->dev); ret = of_property_read_u32(np, "current-speed", &baudrate); if (ret) return ret; + vendor = (struct vendor_data *)of_id->data; } else { + vendor = &vendor_sbsa; baudrate = 115200; } @@ -2550,15 +2568,15 @@ static int sbsa_uart_probe(struct platform_device *pdev) if (!uap) return -ENOMEM; - uap->reg_offset = vendor_sbsa.reg_offset; - uap->vendor = &vendor_sbsa; - uap->fifosize = 32; - uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM; + uap->vendor = vendor; + uap->reg_offset = vendor->reg_offset; + uap->fifosize = vendor->get_fifosize(NULL); + uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; uap->port.irq = platform_get_irq(pdev, 0); - uap->port.ops = &sbsa_uart_pops; + uap->port.ops = vendor->uart_pops; uap->fixed_baud = baudrate; - snprintf(uap->type, sizeof(uap->type), "SBSA"); + snprintf(uap->type, sizeof(uap->type), "PL011 plat"); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -2571,7 +2589,7 @@ static int sbsa_uart_probe(struct platform_device *pdev) return pl011_register_port(uap); } -static int sbsa_uart_remove(struct platform_device *pdev) +static int pl011_uart_plat_remove(struct platform_device *pdev) { struct uart_amba_port *uap = platform_get_drvdata(pdev); @@ -2580,11 +2598,12 @@ static int sbsa_uart_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id sbsa_uart_of_match[] = { - { .compatible = "arm,sbsa-uart", }, +static const struct of_device_id pl011_uart_plat_of_match[] = { + { .compatible = "arm,sbsa-uart", .data = &vendor_sbsa }, + { .compatible = "zte,zx296702-uart", .data = &vendor_zte }, {}, }; -MODULE_DEVICE_TABLE(of, sbsa_uart_of_match); +MODULE_DEVICE_TABLE(of, pl011_uart_plat_of_match); static const struct acpi_device_id sbsa_uart_acpi_match[] = { { "ARMH0011", 0 }, @@ -2592,12 +2611,12 @@ static const struct acpi_device_id sbsa_uart_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match); -static struct platform_driver arm_sbsa_uart_platform_driver = { - .probe = sbsa_uart_probe, - .remove = sbsa_uart_remove, +static struct platform_driver pl011_uart_platform_driver = { + .probe = pl011_uart_plat_probe, + .remove = pl011_uart_plat_remove, .driver = { - .name = "sbsa-uart", - .of_match_table = of_match_ptr(sbsa_uart_of_match), + .name = "uart-pl011-plat", + .of_match_table = of_match_ptr(pl011_uart_plat_of_match), .acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match), }, }; @@ -2632,14 +2651,14 @@ static int __init pl011_init(void) { printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); - if (platform_driver_register(&arm_sbsa_uart_platform_driver)) + if (platform_driver_register(&pl011_uart_platform_driver)) pr_warn("could not register SBSA UART platform driver\n"); return amba_driver_register(&pl011_driver); } static void __exit pl011_exit(void) { - platform_driver_unregister(&arm_sbsa_uart_platform_driver); + platform_driver_unregister(&pl011_uart_platform_driver); amba_driver_unregister(&pl011_driver); }