From patchwork Tue Jun 23 10:09:35 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jun Nie X-Patchwork-Id: 50213 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-la0-f69.google.com (mail-la0-f69.google.com [209.85.215.69]) by ip-10-151-82-157.ec2.internal (Postfix) with ESMTPS id 8DF1D216E1 for ; Tue, 23 Jun 2015 10:10:41 +0000 (UTC) Received: by lagh6 with SMTP id h6sf1626321lag.0 for ; Tue, 23 Jun 2015 03:10:40 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:mime-version:delivered-to:from:to:cc:subject :date:message-id:in-reply-to:references:sender:precedence:list-id :x-original-sender:x-original-authentication-results:mailing-list :list-post:list-help:list-archive:list-unsubscribe; bh=neN6s8H5kxSuPyKUN0hn4nwW1x54wgIvI1JYbpQnxAM=; b=W9xIR8BHfUbANeFtIxYBB9VT6kGkM1517+s+7DMJaskH0qi7rtTQ9A/9xrrWt5SHMd udxq8HW/nFYtnh1UfrJDE54bHyoKJ/+81vUFEnMKMZi53e+tbGtpV2SwigYkH5Jvur5u 2NSUeCBft0QHc8I/5wsP4kPx6v1M021zH9QobKS2xBC1AaPFUz3mRHzgjH+BodkPx3ul KN19eX+by9MSyTZufzqzc10ePYifiKrwHtDULvHXY05WvOGKrmEIjzrffyqPDkxY6xoA 0RYKYIiEtAmUR8zlMIzY3+dh5q6llDAM3fr+d7TEYlUuyi3AaMRZDHA3J6xx87Jd8Qtm /5eA== X-Gm-Message-State: ALoCoQlVyD3jaOPlifXIPCREyV7G5DAzDJxsfg4aMBGNOtQDokTntUvpNDNZ9cTKEbQsoYASLuNe X-Received: by 10.180.89.231 with SMTP id br7mr802266wib.0.1435054240606; Tue, 23 Jun 2015 03:10:40 -0700 (PDT) MIME-Version: 1.0 X-BeenThere: patchwork-forward@linaro.org Received: by 10.152.36.169 with SMTP id r9ls25219laj.86.gmail; Tue, 23 Jun 2015 03:10:40 -0700 (PDT) X-Received: by 10.112.139.130 with SMTP id qy2mr34341622lbb.21.1435054240442; Tue, 23 Jun 2015 03:10:40 -0700 (PDT) Received: from mail-lb0-f178.google.com (mail-lb0-f178.google.com. [209.85.217.178]) by mx.google.com with ESMTPS id bc7si18893497lbc.144.2015.06.23.03.10.40 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 23 Jun 2015 03:10:40 -0700 (PDT) Received-SPF: pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.217.178 as permitted sender) client-ip=209.85.217.178; Received: by lbbvz5 with SMTP id vz5so3462843lbb.0 for ; Tue, 23 Jun 2015 03:10:40 -0700 (PDT) X-Received: by 10.152.206.75 with SMTP id lm11mr33594737lac.41.1435054240313; Tue, 23 Jun 2015 03:10:40 -0700 (PDT) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patch@linaro.org Received: by 10.112.108.230 with SMTP id hn6csp2963471lbb; Tue, 23 Jun 2015 03:10:38 -0700 (PDT) X-Received: by 10.70.134.198 with SMTP id pm6mr68340486pdb.17.1435054237806; Tue, 23 Jun 2015 03:10:37 -0700 (PDT) Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id h8si33982278pdn.89.2015.06.23.03.10.37 for ; Tue, 23 Jun 2015 03:10:37 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-serial-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932469AbbFWKKg (ORCPT ); Tue, 23 Jun 2015 06:10:36 -0400 Received: from mail-pa0-f54.google.com ([209.85.220.54]:33769 "EHLO mail-pa0-f54.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932391AbbFWKKf (ORCPT ); Tue, 23 Jun 2015 06:10:35 -0400 Received: by padev16 with SMTP id ev16so4137136pad.0 for ; Tue, 23 Jun 2015 03:10:34 -0700 (PDT) X-Received: by 10.70.38.105 with SMTP id f9mr68066983pdk.14.1435054234800; Tue, 23 Jun 2015 03:10:34 -0700 (PDT) Received: from localhost.localdomain ([107.6.117.178]) by mx.google.com with ESMTPSA id cq5sm4063415pad.11.2015.06.23.03.10.27 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Tue, 23 Jun 2015 03:10:33 -0700 (PDT) From: Jun Nie To: peter@hurleysoftware.com, linux@arm.linux.org.uk, Andrew.Jackson@arm.com, gregkh@linuxfoundation.org, linux-serial@vger.kernel.org, shawn.guo@linaro.org Cc: jason.liu@linaro.org, wan.zhijun@zte.com.cn, Jun Nie Subject: [PATCH v12 5/5] uart: pl011: Add support to ZTE ZX296702 uart Date: Tue, 23 Jun 2015 18:09:35 +0800 Message-Id: <1435054175-7473-6-git-send-email-jun.nie@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1435054175-7473-1-git-send-email-jun.nie@linaro.org> References: <1435054175-7473-1-git-send-email-jun.nie@linaro.org> Sender: linux-serial-owner@vger.kernel.org Precedence: list List-ID: X-Mailing-List: linux-serial@vger.kernel.org X-Removed-Original-Auth: Dkim didn't pass. X-Original-Sender: jun.nie@linaro.org X-Original-Authentication-Results: mx.google.com; spf=pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.217.178 as permitted sender) smtp.mail=patch+caf_=patchwork-forward=linaro.org@linaro.org Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org X-Google-Group-Id: 836684582541 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , Support ZTE uart with some registers differing offset. Probe as platform device for not AMBA IP ID is available on ZTE uart. Signed-off-by: Jun Nie Reviewed-by: Peter Hurley --- drivers/tty/serial/Kconfig | 4 +- drivers/tty/serial/amba-pl011.c | 212 ++++++++++++++++++++++++++++++++++++++-- include/linux/amba/serial.h | 14 +++ 3 files changed, 218 insertions(+), 12 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index f8120c1..fd3420d 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -47,12 +47,12 @@ config SERIAL_AMBA_PL010_CONSOLE config SERIAL_AMBA_PL011 tristate "ARM AMBA PL011 serial port support" - depends on ARM_AMBA + depends on ARM_AMBA || SOC_ZX296702 select SERIAL_CORE help This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M - here. + here. Say Y or M if you have SOC_ZX296702. If unsure, say N. diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index fd8967d..560526b 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -74,6 +74,10 @@ /* There is by now at least one vendor with differing details, so handle it */ struct vendor_data { unsigned int ifls; + unsigned int fr_busy; + unsigned int fr_dsr; + unsigned int fr_cts; + unsigned int fr_ri; unsigned int lcrh_tx; unsigned int lcrh_rx; u16 *reg_lut; @@ -106,6 +110,7 @@ enum reg_idx { REG_DMACR = IDX(UART011_DMACR), }; +#ifdef CONFIG_ARM_AMBA static u16 arm_reg[] = { [REG_DR] = UART01x_DR, [REG_RSR] = UART01x_RSR, @@ -132,6 +137,10 @@ static unsigned int get_fifosize_arm(struct amba_device *dev) static struct vendor_data vendor_arm = { .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .fr_busy = UART01x_FR_BUSY, + .fr_dsr = UART01x_FR_DSR, + .fr_cts = UART01x_FR_CTS, + .fr_ri = UART011_FR_RI, .lcrh_tx = REG_LCRH, .lcrh_rx = REG_LCRH, .reg_lut = arm_reg, @@ -167,6 +176,10 @@ static unsigned int get_fifosize_st(struct amba_device *dev) static struct vendor_data vendor_st = { .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, + .fr_busy = UART01x_FR_BUSY, + .fr_dsr = UART01x_FR_DSR, + .fr_cts = UART01x_FR_CTS, + .fr_ri = UART011_FR_RI, .lcrh_tx = REG_LCRH, .lcrh_rx = REG_ST_LCRH_RX, .reg_lut = st_reg, @@ -175,6 +188,48 @@ static struct vendor_data vendor_st = { .cts_event_workaround = true, .get_fifosize = get_fifosize_st, }; +#endif + +#ifdef CONFIG_SOC_ZX296702 +static u16 zte_reg[] = { + [REG_DR] = ZX_UART01x_DR, + [REG_RSR] = UART01x_RSR, + [REG_ST_DMAWM] = ST_UART011_DMAWM, + [REG_FR] = ZX_UART01x_FR, + [REG_ST_LCRH_RX] = ST_UART011_LCRH_RX, + [REG_ILPR] = UART01x_ILPR, + [REG_IBRD] = UART011_IBRD, + [REG_FBRD] = UART011_FBRD, + [REG_LCRH] = ZX_UART011_LCRH_TX, + [REG_CR] = ZX_UART011_CR, + [REG_IFLS] = ZX_UART011_IFLS, + [REG_IMSC] = ZX_UART011_IMSC, + [REG_RIS] = UART011_RIS, + [REG_MIS] = ZX_UART011_MIS, + [REG_ICR] = ZX_UART011_ICR, + [REG_DMACR] = ZX_UART011_DMACR, +}; + +static unsigned int get_fifosize_zx(struct amba_device *dev) +{ + return 16; +} + +static struct vendor_data vendor_zte = { + .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .fr_busy = ZX_UART01x_FR_BUSY, + .fr_dsr = ZX_UART01x_FR_DSR, + .fr_cts = ZX_UART01x_FR_CTS, + .fr_ri = ZX_UART011_FR_RI, + .lcrh_tx = REG_LCRH, + .lcrh_rx = REG_ST_LCRH_RX, + .reg_lut = zte_reg, + .oversampling = false, + .dma_threshold = false, + .cts_event_workaround = false, + .get_fifosize = get_fifosize_zx, +}; +#endif /* Deals with DMA transactions */ @@ -218,6 +273,10 @@ struct uart_amba_port { unsigned int im; /* interrupt mask */ unsigned int old_status; unsigned int fifosize; /* vendor-specific */ + unsigned int fr_busy; /* vendor-specific */ + unsigned int fr_dsr; /* vendor-specific */ + unsigned int fr_cts; /* vendor-specific */ + unsigned int fr_ri; /* vendor-specific */ unsigned int lcrh_tx; /* vendor-specific */ unsigned int lcrh_rx; /* vendor-specific */ unsigned int old_cr; /* state during shutdown */ @@ -1148,7 +1207,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) return; /* Disable RX and TX DMA */ - while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY) + while (pl011_readw(uap, REG_FR) & uap->fr_busy) barrier(); spin_lock_irq(&uap->port.lock); @@ -1431,11 +1490,11 @@ static void pl011_modem_status(struct uart_amba_port *uap) if (delta & UART01x_FR_DCD) uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); - if (delta & UART01x_FR_DSR) + if (delta & uap->fr_dsr) uap->port.icount.dsr++; - if (delta & UART01x_FR_CTS) - uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); + if (delta & uap->fr_cts) + uart_handle_cts_change(&uap->port, status & uap->fr_cts); wake_up_interruptible(&uap->port.state->port.delta_msr_wait); } @@ -1522,7 +1581,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port) struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); unsigned int status = pl011_readw(uap, REG_FR); - return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; + return status & (uap->fr_busy|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; } static unsigned int pl011_get_mctrl(struct uart_port *port) @@ -1537,9 +1596,9 @@ static unsigned int pl011_get_mctrl(struct uart_port *port) result |= tiocmbit TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); - TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR); - TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS); - TIOCMBIT(UART011_FR_RI, TIOCM_RNG); + TIOCMBIT(uap->fr_dsr, TIOCM_DSR); + TIOCMBIT(uap->fr_cts, TIOCM_CTS); + TIOCMBIT(uap->fr_ri, TIOCM_RNG); #undef TIOCMBIT return result; } @@ -2107,7 +2166,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) */ do { status = pl011_readw(uap, REG_FR); - } while (status & UART01x_FR_BUSY); + } while (status & uap->fr_busy); pl011_writew(uap, old_cr, REG_CR); if (locked) @@ -2218,7 +2277,7 @@ static void pl011_putc(struct uart_port *port, int c) while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF) ; pl011_writeb(uap, c, REG_DR); - while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY) + while (pl011_readw(uap, REG_FR) & uap->fr_busy) ; } @@ -2255,6 +2314,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; +#ifdef CONFIG_ARM_AMBA static int pl011_probe_dt_alias(int index, struct device *dev) { struct device_node *np; @@ -2321,6 +2381,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->reg_lut = vendor->reg_lut; uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; + uap->fr_busy = vendor->fr_busy; + uap->fr_dsr = vendor->fr_dsr; + uap->fr_cts = vendor->fr_cts; + uap->fr_ri = vendor->fr_ri; uap->old_cr = 0; uap->fifosize = vendor->get_fifosize(dev); uap->port.dev = &dev->dev; @@ -2381,6 +2445,101 @@ static int pl011_remove(struct amba_device *dev) uart_unregister_driver(&amba_reg); return 0; } +#endif + +#ifdef CONFIG_SOC_ZX296702 +static int zx_uart_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct uart_amba_port *uap; + struct vendor_data *vendor = &vendor_zte; + struct resource *res; + void __iomem *base; + int i, ret; + + uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port), + GFP_KERNEL); + if (uap == NULL) { + ret = -ENOMEM; + goto out; + } + + i = of_alias_get_id(np, "serial"); + if (i < 0) { + dev_err(&pdev->dev, "failed to get alias id: %d\n", i); + ret = i; + goto out; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (!base) { + ret = -ENOMEM; + goto out; + } + + uap->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(uap->clk)) { + ret = PTR_ERR(uap->clk); + goto out; + } + + uap->vendor = vendor; + uap->reg_lut = vendor->reg_lut; + uap->fr_busy = vendor->fr_busy; + uap->fr_dsr = vendor->fr_dsr; + uap->fr_cts = vendor->fr_cts; + uap->fr_ri = vendor->fr_ri; + uap->old_cr = 0; + uap->fifosize = 16; + uap->port.dev = &pdev->dev; + uap->port.mapbase = res->start; + uap->port.membase = base; + uap->port.iotype = UPIO_MEM; + uap->port.irq = platform_get_irq(pdev, 0); + uap->port.fifosize = uap->fifosize; + uap->port.ops = &amba_pl011_pops; + uap->port.flags = UPF_BOOT_AUTOCONF; + uap->port.line = i; + INIT_DELAYED_WORK(&uap->tx_softirq_work, pl011_tx_softirq); + + /* Ensure interrupts from this UART are masked and cleared */ + pl011_writew(uap, 0, REG_IMSC); + pl011_writew(uap, 0xffff, REG_ICR); + + amba_ports[i] = uap; + + platform_set_drvdata(pdev, uap); + ret = uart_register_driver(&amba_reg); + if (ret < 0) { + dev_err(&pdev->dev, + "Failed to register AMBA-PL011 driver\n"); + return ret; + } + ret = uart_add_one_port(&amba_reg, &uap->port); + if (ret) { + amba_ports[i] = NULL; + pl011_dma_remove(uap); + } +out: + return ret; +} + +static int zx_uart_remove(struct platform_device *pdev) +{ + struct uart_amba_port *uap = platform_get_drvdata(pdev); + int i; + + uart_remove_one_port(&amba_reg, &uap->port); + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == uap) + amba_ports[i] = NULL; + + pl011_dma_remove(uap); + return 0; +} +#endif #ifdef CONFIG_PM_SLEEP static int pl011_suspend(struct device *dev) @@ -2406,6 +2565,7 @@ static int pl011_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume); +#ifdef CONFIG_ARM_AMBA static struct amba_id pl011_ids[] = { { .id = 0x00041011, @@ -2431,17 +2591,49 @@ static struct amba_driver pl011_driver = { .probe = pl011_probe, .remove = pl011_remove, }; +#endif + +#ifdef CONFIG_SOC_ZX296702 +static const struct of_device_id zx_uart_dt_ids[] = { + { .compatible = "zte,zx296702-uart", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, zx_uart_dt_ids); + +static struct platform_driver zx_uart_driver = { + .driver = { + .name = "zx-uart", + .owner = THIS_MODULE, + .pm = &pl011_dev_pm_ops, + .of_match_table = zx_uart_dt_ids, + }, + .probe = zx_uart_probe, + .remove = zx_uart_remove, +}; +#endif + static int __init pl011_init(void) { printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); +#ifdef CONFIG_ARM_AMBA return amba_driver_register(&pl011_driver); +#endif + +#ifdef CONFIG_SOC_ZX296702 + return platform_driver_register(&zx_uart_driver); +#endif } static void __exit pl011_exit(void) { +#ifdef CONFIG_ARM_AMBA amba_driver_unregister(&pl011_driver); +#endif +#ifdef CONFIG_SOC_ZX296702 + platform_driver_unregister(&zx_uart_driver); +#endif } /* diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 0ddb5c0..6a0a89e 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -33,12 +33,14 @@ #define UART01x_DR 0x00 /* Data read or written from the interface. */ #define UART01x_RSR 0x04 /* Receive status register (Read). */ #define UART01x_ECR 0x04 /* Error clear register (Write). */ +#define ZX_UART01x_DR 0x04 /* Data read or written from the interface. */ #define UART010_LCRH 0x08 /* Line control register, high byte. */ #define ST_UART011_DMAWM 0x08 /* DMA watermark configure register. */ #define UART010_LCRM 0x0C /* Line control register, middle byte. */ #define ST_UART011_TIMEOUT 0x0C /* Timeout period register. */ #define UART010_LCRL 0x10 /* Line control register, low byte. */ #define UART010_CR 0x14 /* Control register. */ +#define ZX_UART01x_FR 0x14 /* Flag register (Read only). */ #define UART01x_FR 0x18 /* Flag register (Read only). */ #define UART010_IIR 0x1C /* Interrupt identification register (Read). */ #define UART010_ICR 0x1C /* Interrupt clear register (Write). */ @@ -49,13 +51,21 @@ #define UART011_LCRH 0x2c /* Line control register. */ #define ST_UART011_LCRH_TX 0x2c /* Tx Line control register. */ #define UART011_CR 0x30 /* Control register. */ +#define ZX_UART011_LCRH_TX 0x30 /* Tx Line control register. */ #define UART011_IFLS 0x34 /* Interrupt fifo level select. */ +#define ZX_UART011_CR 0x34 /* Control register. */ +#define ZX_UART011_IFLS 0x38 /* Interrupt fifo level select. */ #define UART011_IMSC 0x38 /* Interrupt mask. */ #define UART011_RIS 0x3c /* Raw interrupt status. */ #define UART011_MIS 0x40 /* Masked interrupt status. */ +#define ZX_UART011_IMSC 0x40 /* Interrupt mask. */ #define UART011_ICR 0x44 /* Interrupt clear register. */ +#define ZX_UART011_RIS 0x44 /* Raw interrupt status. */ #define UART011_DMACR 0x48 /* DMA control register. */ +#define ZX_UART011_MIS 0x48 /* Masked interrupt status. */ +#define ZX_UART011_ICR 0x4c /* Interrupt clear register. */ #define ST_UART011_XFCR 0x50 /* XON/XOFF control register. */ +#define ZX_UART011_DMACR 0x50 /* DMA control register. */ #define ST_UART011_XON1 0x54 /* XON1 register. */ #define ST_UART011_XON2 0x58 /* XON2 register. */ #define ST_UART011_XOFF1 0x5C /* XON1 register. */ @@ -75,15 +85,19 @@ #define UART01x_RSR_PE 0x02 #define UART01x_RSR_FE 0x01 +#define ZX_UART01x_FR_BUSY 0x300 #define UART011_FR_RI 0x100 #define UART011_FR_TXFE 0x080 #define UART011_FR_RXFF 0x040 #define UART01x_FR_TXFF 0x020 #define UART01x_FR_RXFE 0x010 #define UART01x_FR_BUSY 0x008 +#define ZX_UART01x_FR_DSR 0x008 #define UART01x_FR_DCD 0x004 #define UART01x_FR_DSR 0x002 +#define ZX_UART01x_FR_CTS 0x002 #define UART01x_FR_CTS 0x001 +#define ZX_UART011_FR_RI 0x001 #define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY) #define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */