Message ID | 40006660eaece22f76b9532c70479d719655b33f.1685927620.git.kwmad.kim@samsung.com |
---|---|
State | New |
Headers | show |
Series | change UIC command handling | expand |
> v1 -> v2: replace usleep_range with udelay because it's a sleepable period. > > With auto hibern8 enabled, UIC could be working for a while to process a > hibern8 operation and HCI reports UIC not ready for a short term through > HCS.UCRDY. > And UFS driver can't recognize the operation. > UFSHCI spec specifies UCRDY like this: > whether the host controller is ready to process UIC COMMAND > > The 'ready' could be seen as many different meanings. If the meaning includes > not processing any request from HCI, processing a hibern8 operation can be > 'not ready'. In this situation, the driver needs to wait until the operations is > completed. > > Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com> > --- > drivers/ufs/core/ufshcd.c | 13 ++++++++++++- > 1 file changed, 12 insertions(+), 1 deletion(-) > > diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index > a89d39a..1f58a20 100644 > --- a/drivers/ufs/core/ufshcd.c > +++ b/drivers/ufs/core/ufshcd.c > @@ -2365,7 +2365,18 @@ static inline int ufshcd_hba_capabilities(struct > ufs_hba *hba) > */ > static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba) { > - return ufshcd_readl(hba, REG_CONTROLLER_STATUS) & > UIC_COMMAND_READY; > + ktime_t timeout = ktime_add_ms(ktime_get(), UIC_CMD_TIMEOUT); > + u32 val = 0; > + > + do { > + val = ufshcd_readl(hba, REG_CONTROLLER_STATUS) & > + UIC_COMMAND_READY; > + if (val) > + break; > + udelay(500); > + } while (ktime_before(ktime_get(), timeout)); > + > + return val ? true : false; > } Can you use read_poll_timeout() instead? Thanks, Avri > > /** > -- > 2.7.4
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index a89d39a..1f58a20 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -2365,7 +2365,18 @@ static inline int ufshcd_hba_capabilities(struct ufs_hba *hba) */ static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba) { - return ufshcd_readl(hba, REG_CONTROLLER_STATUS) & UIC_COMMAND_READY; + ktime_t timeout = ktime_add_ms(ktime_get(), UIC_CMD_TIMEOUT); + u32 val = 0; + + do { + val = ufshcd_readl(hba, REG_CONTROLLER_STATUS) & + UIC_COMMAND_READY; + if (val) + break; + udelay(500); + } while (ktime_before(ktime_get(), timeout)); + + return val ? true : false; } /**
v1 -> v2: replace usleep_range with udelay because it's a sleepable period. With auto hibern8 enabled, UIC could be working for a while to process a hibern8 operation and HCI reports UIC not ready for a short term through HCS.UCRDY. And UFS driver can't recognize the operation. UFSHCI spec specifies UCRDY like this: whether the host controller is ready to process UIC COMMAND The 'ready' could be seen as many different meanings. If the meaning includes not processing any request from HCI, processing a hibern8 operation can be 'not ready'. In this situation, the driver needs to wait until the operations is completed. Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com> --- drivers/ufs/core/ufshcd.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)