diff mbox series

[v2,1/2] scsi: hisi_sas: Handle the NCQ error returned by D2H frame

Message ID 20240402035513.2024241-2-chenxiang66@hisilicon.com
State Superseded
Headers show
Series Some small fixes for hisi_sas | expand

Commit Message

chenxiang April 2, 2024, 3:55 a.m. UTC 
From: Xiang Chen <chenxiang66@hisilicon.com>

We find that some disks use D2H frame instead of SDB frame to return NCQ
error. Currently, only the I/O corresponding to the D2H frame is processed
in this scenario, which does not meet the processing requirements of the
NCQ error scenario.
So we set dev_status to HISI_SAS_DEV_NCQ_ERR and abort all I/Os of the disk
in this scenario.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 7d2a33514538..34f96cc35342 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2244,7 +2244,15 @@  slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
 	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
 		if ((dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) &&
 		    (sipc_rx_err_type & RX_FIS_STATUS_ERR_MSK)) {
-			ts->stat = SAS_PROTO_RESPONSE;
+			if (task->ata_task.use_ncq) {
+				struct domain_device *device = task->dev;
+				struct hisi_sas_device *sas_dev = device->lldd_dev;
+
+				sas_dev->dev_status = HISI_SAS_DEV_NCQ_ERR;
+				slot->abort = 1;
+			} else {
+				ts->stat = SAS_PROTO_RESPONSE;
+			}
 		} else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
 			ts->residual = trans_tx_fail_type;
 			ts->stat = SAS_DATA_UNDERRUN;