diff mbox series

[RFC,v4,05/11] scsi: ufs: qcom: Perform read back after writing CGC enable

Message ID 20240122-ufs-reset-ensure-effect-before-delay-v4-5-6c48432151cc@redhat.com
State New
Headers show
Series scsi: ufs: Remove overzealous memory barriers | expand

Commit Message

Andrew Halaney Jan. 22, 2024, 5:21 p.m. UTC 
Currently, the CGC enable bit is written and then an mb() is used to
ensure that completes before continuing.

mb() ensure that the write completes, but completion doesn't mean that
it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read
back to force it to make it all the way to the device. This is
documented in device-io.rst and a talk by Will Deacon on this can
be seen over here:

    https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678

Let's do that to ensure the bit hits the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed
by writel()/readl()), it can safely be removed.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---
 drivers/ufs/host/ufs-qcom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index decad95bd444..881074fc2329 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -406,7 +406,7 @@  static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba)
 		    REG_UFS_CFG2);
 
 	/* Ensure that HW clock gating is enabled before next operations */
-	mb();
+	ufshcd_readl(hba, REG_UFS_CFG2);
 }
 
 static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,