| Message ID | 20230929131936.29421-3-quic_nitirawa@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add UFS host controller and Phy nodes for sc7280 | expand |
On Fri Sep 29, 2023 at 3:19 PM CEST, Nitin Rawat wrote: > Add UFS host controller and PHY nodes for sc7280 soc. Hi Nitin, I left some comments for v3 that maybe you missed before sending v4: https://lore.kernel.org/linux-arm-msm/CVVA1OVF4W9E.380D6QC1K9GD6@otso/ At least the clock part should definitely be fixed, ICE we can do later. Regards Luca > > Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sc7280.dtsi | 66 ++++++++++++++++++++++++++++ > 1 file changed, 66 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 66f1eb83cca7..163e3df60966 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -3353,6 +3353,72 @@ > }; > }; > > + ufs_mem_hc: ufs@1d84000 { > + compatible = "qcom,sc7280-ufshc", "qcom,ufshc", > + "jedec,ufs-2.0"; > + reg = <0x0 0x01d84000 0x0 0x3000>; > + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&ufs_mem_phy>; > + phy-names = "ufsphy"; > + lanes-per-direction = <2>; > + #reset-cells = <1>; > + resets = <&gcc GCC_UFS_PHY_BCR>; > + reset-names = "rst"; > + > + power-domains = <&gcc GCC_UFS_PHY_GDSC>; > + required-opps = <&rpmhpd_opp_nom>; > + > + iommus = <&apps_smmu 0x80 0x0>; > + dma-coherent; > + > + interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, > + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_UFS_MEM_CFG 0>; > + > + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, > + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, > + <&gcc GCC_UFS_PHY_AHB_CLK>, > + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, > + <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, > + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, > + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; > + clock-names = "core_clk", > + "bus_aggr_clk", > + "iface_clk", > + "core_clk_unipro", > + "ref_clk", > + "tx_lane0_sync_clk", > + "rx_lane0_sync_clk", > + "rx_lane1_sync_clk"; > + freq-table-hz = > + <75000000 300000000>, > + <0 0>, > + <0 0>, > + <75000000 300000000>, > + <0 0>, > + <0 0>, > + <0 0>, > + <0 0>; > + status = "disabled"; > + }; > + > + ufs_mem_phy: phy@1d87000 { > + compatible = "qcom,sc7280-qmp-ufs-phy"; > + reg = <0x0 0x01d87000 0x0 0xe00>; > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, > + <&gcc GCC_UFS_1_CLKREF_EN>; > + clock-names = "ref", "ref_aux", "qref"; > + > + resets = <&ufs_mem_hc 0>; > + reset-names = "ufsphy"; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + status = "disabled"; > + }; > + > usb_1_hsphy: phy@88e3000 { > compatible = "qcom,sc7280-usb-hs-phy", > "qcom,usb-snps-hs-7nm-phy"; > -- > 2.17.1
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 66f1eb83cca7..163e3df60966 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -3353,6 +3353,72 @@ }; }; + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sc7280-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x80 0x0>; + dma-coherent; + + interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_UFS_MEM_CFG 0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc7280-qmp-ufs-phy"; + reg = <0x0 0x01d87000 0x0 0xe00>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_1_CLKREF_EN>; + clock-names = "ref", "ref_aux", "qref"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + usb_1_hsphy: phy@88e3000 { compatible = "qcom,sc7280-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy";
Add UFS host controller and PHY nodes for sc7280 soc. Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 66 ++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) -- 2.17.1