| Message ID | 20230712090535.34894-6-njavali@marvell.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | qla2xxx driver bug fixes | expand |
> On Jul 12, 2023, at 2:05 AM, Nilesh Javali <njavali@marvell.com> wrote: > > From: Quinn Tran <qutran@marvell.com> > > Link up failure occurred where driver fail to see certain > events from FW indicating link up (AEN 8011) and fabric login completion > (AEN 8014). Without these 2 events driver would not proceed forward > to scan the fabric. The cause of this is due to delay in the receive > of interrupt for Mailbox 60 that cause qla to set the fw_started flag late. > The late setting of this flag cause other interrupts to be dropped. > These dropped interrupts happen to be the link up (AEN 8011) and > fabric login completion (AEN 8014). > > Set fw_started flag early to prevent interrupts being dropped. > > Cc: stable@vger.kernel.org > Signed-off-by: Quinn Tran <qutran@marvell.com> > Signed-off-by: Nilesh Javali <njavali@marvell.com> > --- > drivers/scsi/qla2xxx/qla_init.c | 3 ++- > drivers/scsi/qla2xxx/qla_isr.c | 6 +++++- > 2 files changed, 7 insertions(+), 2 deletions(-) > > diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c > index 3b32e65d6260..725806ca9572 100644 > --- a/drivers/scsi/qla2xxx/qla_init.c > +++ b/drivers/scsi/qla2xxx/qla_init.c > @@ -4815,15 +4815,16 @@ qla2x00_init_rings(scsi_qla_host_t *vha) > if (ha->flags.edif_enabled) > mid_init_cb->init_cb.frame_payload_size = cpu_to_le16(ELS_MAX_PAYLOAD); > > + QLA_FW_STARTED(ha); > rval = qla2x00_init_firmware(vha, ha->init_cb_size); > next_check: > if (rval) { > + QLA_FW_STOPPED(ha); > ql_log(ql_log_fatal, vha, 0x00d2, > "Init Firmware **** FAILED ****.\n"); > } else { > ql_dbg(ql_dbg_init, vha, 0x00d3, > "Init Firmware -- success.\n"); > - QLA_FW_STARTED(ha); > vha->u_ql2xexchoffld = vha->u_ql2xiniexchg = 0; > } > > diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c > index a07c010b0843..eb8480a0d7b0 100644 > --- a/drivers/scsi/qla2xxx/qla_isr.c > +++ b/drivers/scsi/qla2xxx/qla_isr.c > @@ -1121,8 +1121,12 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb) > unsigned long flags; > fc_port_t *fcport = NULL; > > - if (!vha->hw->flags.fw_started) > + if (!vha->hw->flags.fw_started) { > + ql_log(ql_log_warn, vha, 0x50ff, > + "Dropping AEN - %04x %04x %04x %04x.\n", > + mb[0], mb[1], mb[2], mb[3]); > return; > + } > > /* Setup to process RIO completion. */ > handle_cnt = 0; > -- > 2.23.1 > Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 3b32e65d6260..725806ca9572 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -4815,15 +4815,16 @@ qla2x00_init_rings(scsi_qla_host_t *vha) if (ha->flags.edif_enabled) mid_init_cb->init_cb.frame_payload_size = cpu_to_le16(ELS_MAX_PAYLOAD); + QLA_FW_STARTED(ha); rval = qla2x00_init_firmware(vha, ha->init_cb_size); next_check: if (rval) { + QLA_FW_STOPPED(ha); ql_log(ql_log_fatal, vha, 0x00d2, "Init Firmware **** FAILED ****.\n"); } else { ql_dbg(ql_dbg_init, vha, 0x00d3, "Init Firmware -- success.\n"); - QLA_FW_STARTED(ha); vha->u_ql2xexchoffld = vha->u_ql2xiniexchg = 0; } diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index a07c010b0843..eb8480a0d7b0 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1121,8 +1121,12 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb) unsigned long flags; fc_port_t *fcport = NULL; - if (!vha->hw->flags.fw_started) + if (!vha->hw->flags.fw_started) { + ql_log(ql_log_warn, vha, 0x50ff, + "Dropping AEN - %04x %04x %04x %04x.\n", + mb[0], mb[1], mb[2], mb[3]); return; + } /* Setup to process RIO completion. */ handle_cnt = 0;