diff mbox series

[3/6] mpi3mr: Wait for diagnostic save during controller init

Message ID 20230228140835.4075-4-ranjan.kumar@broadcom.com
State New
Headers show
Series [1/6] mpi3mr: IOCTL timeout when disable/enable Interpt | expand

Commit Message

Ranjan Kumar Feb. 28, 2023, 2:08 p.m. UTC 
If the controller reset operation is triggered to recover the
controller from the fault state then wait for the snapdump to
be saved in the firmware region before proceeding for
resetting the controller.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
---
 drivers/scsi/mpi3mr/mpi3mr_fw.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index e7ea3f7b9205..e5c0bc6d47d5 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -1201,7 +1201,7 @@  mpi3mr_revalidate_factsdata(struct mpi3mr_ioc *mrioc)
  */
 static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc)
 {
-	u32 ioc_config, ioc_status, timeout;
+	u32 ioc_config, ioc_status, timeout, host_diagnostic;
 	int retval = 0;
 	enum mpi3mr_iocstate ioc_state;
 	u64 base_info;
@@ -1255,6 +1255,23 @@  static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc)
 			    retval, mpi3mr_iocstate_name(ioc_state));
 	}
 	if (ioc_state != MRIOC_STATE_RESET) {
+		if (ioc_state == MRIOC_STATE_FAULT) {
+			timeout = MPI3_SYSIF_DIAG_SAVE_TIMEOUT * 10;
+			mpi3mr_print_fault_info(mrioc);
+			do {
+				host_diagnostic =
+					readl(&mrioc->sysif_regs->host_diagnostic);
+				if (!(host_diagnostic &
+				      MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS))
+					break;
+				if (!pci_device_is_present(mrioc->pdev)) {
+					mrioc->unrecoverable = 1;
+					ioc_err(mrioc, "controller is not present at the bringup\n");
+					goto out_device_not_present;
+				}
+				msleep(100);
+			} while (--timeout);
+		}
 		mpi3mr_print_fault_info(mrioc);
 		ioc_info(mrioc, "issuing soft reset to bring to reset state\n");
 		retval = mpi3mr_issue_reset(mrioc,