@@ -675,6 +675,68 @@ void sas_probe_sata(struct asd_sas_port *port)
}
+int sas_ata_add_dev(struct domain_device *parent, struct ex_phy *phy,
+ struct domain_device *child, int phy_id)
+{
+ struct sas_rphy *rphy;
+ int ret;
+
+ if (child->linkrate > parent->min_linkrate) {
+ struct sas_phy *cphy = child->phy;
+ enum sas_linkrate min_prate = cphy->minimum_linkrate,
+ parent_min_lrate = parent->min_linkrate,
+ min_linkrate = (min_prate > parent_min_lrate) ?
+ parent_min_lrate : 0;
+ struct sas_phy_linkrates rates = {
+ .maximum_linkrate = parent->min_linkrate,
+ .minimum_linkrate = min_linkrate,
+ };
+
+ pr_notice("ex %016llx phy%02d SATA device linkrate > min pathway connection rate, attempting to lower device linkrate\n",
+ SAS_ADDR(child->sas_addr), phy_id);
+ ret = sas_smp_phy_control(parent, phy_id,
+ PHY_FUNC_LINK_RESET, &rates);
+ if (ret) {
+ pr_err("ex %016llx phy%02d SATA device could not set linkrate (%d)\n",
+ SAS_ADDR(child->sas_addr), phy_id, ret);
+ return ret;
+ }
+ pr_notice("ex %016llx phy%02d SATA device set linkrate successfully\n",
+ SAS_ADDR(child->sas_addr), phy_id);
+ child->linkrate = child->min_linkrate;
+ }
+ ret = sas_get_ata_info(child, phy);
+ if (ret)
+ return ret;
+
+ sas_init_dev(child);
+ ret = sas_ata_init(child);
+ if (ret)
+ return ret;
+
+ rphy = sas_end_device_alloc(phy->port);
+ if (!rphy)
+ return ret;
+
+ rphy->identify.phy_identifier = phy_id;
+ child->rphy = rphy;
+ get_device(&rphy->dev);
+
+ list_add_tail(&child->disco_list_node, &parent->port->disco_list);
+
+ ret = sas_discover_sata(child);
+ if (ret) {
+ pr_notice("sas_discover_sata() for device %16llx at %016llx:%02d returned 0x%x\n",
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(parent->sas_addr), phy_id, ret);
+ sas_rphy_free(child->rphy);
+ list_del(&child->disco_list_node);
+ return ret;
+ }
+
+ return 0;
+}
+
static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func)
{
struct domain_device *dev, *n;
@@ -785,61 +785,11 @@ static struct domain_device *sas_ex_discover_end_dev(
sas_ex_get_linkrate(parent, child, phy);
sas_device_set_phy(child, phy->port);
-#ifdef CONFIG_SCSI_SAS_ATA
if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) {
- if (child->linkrate > parent->min_linkrate) {
- struct sas_phy *cphy = child->phy;
- enum sas_linkrate min_prate = cphy->minimum_linkrate,
- parent_min_lrate = parent->min_linkrate,
- min_linkrate = (min_prate > parent_min_lrate) ?
- parent_min_lrate : 0;
- struct sas_phy_linkrates rates = {
- .maximum_linkrate = parent->min_linkrate,
- .minimum_linkrate = min_linkrate,
- };
- int ret;
-
- pr_notice("ex %016llx phy%02d SATA device linkrate > min pathway connection rate, attempting to lower device linkrate\n",
- SAS_ADDR(child->sas_addr), phy_id);
- ret = sas_smp_phy_control(parent, phy_id,
- PHY_FUNC_LINK_RESET, &rates);
- if (ret) {
- pr_err("ex %016llx phy%02d SATA device could not set linkrate (%d)\n",
- SAS_ADDR(child->sas_addr), phy_id, ret);
- goto out_free;
- }
- pr_notice("ex %016llx phy%02d SATA device set linkrate successfully\n",
- SAS_ADDR(child->sas_addr), phy_id);
- child->linkrate = child->min_linkrate;
- }
- res = sas_get_ata_info(child, phy);
- if (res)
- goto out_free;
-
- sas_init_dev(child);
- res = sas_ata_init(child);
+ res = sas_ata_add_dev(parent, phy, child, phy_id);
if (res)
goto out_free;
- rphy = sas_end_device_alloc(phy->port);
- if (!rphy)
- goto out_free;
- rphy->identify.phy_identifier = phy_id;
-
- child->rphy = rphy;
- get_device(&rphy->dev);
-
- list_add_tail(&child->disco_list_node, &parent->port->disco_list);
-
- res = sas_discover_sata(child);
- if (res) {
- pr_notice("sas_discover_sata() for device %16llx at %016llx:%02d returned 0x%x\n",
- SAS_ADDR(child->sas_addr),
- SAS_ADDR(parent->sas_addr), phy_id, res);
- goto out_list_del;
- }
- } else
-#endif
- if (phy->attached_tproto & SAS_PROTOCOL_SSP) {
+ } else if (phy->attached_tproto & SAS_PROTOCOL_SSP) {
child->dev_type = SAS_END_DEVICE;
rphy = sas_end_device_alloc(phy->port);
/* FIXME: error handling */
@@ -37,6 +37,8 @@ int sas_execute_ata_cmd(struct domain_device *device, u8 *fis,
int force_phy_id);
int smp_ata_check_ready_type(struct ata_link *link);
int sas_discover_sata(struct domain_device *dev);
+int sas_ata_add_dev(struct domain_device *parent, struct ex_phy *phy,
+ struct domain_device *child, int phy_id);
#else
#define SAS_ATA_DISABLED_NOTICE \
@@ -112,6 +114,13 @@ static inline int sas_discover_sata(struct domain_device *dev)
SAS_ATA_DISABLED_NOTICE;
return -ENXIO;
}
+
+static inline int sas_ata_add_dev(struct domain_device *parent, struct ex_phy *phy,
+ struct domain_device *child, int phy_id)
+{
+ SAS_ATA_DISABLED_NOTICE;
+ return -ENODEV;
+}
#endif
#endif /* _SAS_ATA_H_ */
Factor out sas_ata_add_dev() and put it in sas_ata.c since it is a sata related interface. Also follow the standard coding style to define an inline empty function when CONFIG_SCSI_SAS_ATA is not enabled. Cc: John Garry <john.g.garry@oracle.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> --- drivers/scsi/libsas/sas_ata.c | 62 ++++++++++++++++++++++++++++++ drivers/scsi/libsas/sas_expander.c | 54 +------------------------- include/scsi/sas_ata.h | 9 +++++ 3 files changed, 73 insertions(+), 52 deletions(-)