@@ -649,6 +649,28 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
int response_len = 0;
int pass, count, result;
struct scsi_sense_hdr sshdr;
+ /*
+ * not-ready to ready transition [asc/ascq=0x28/0x0] or power-on,
+ * reset [asc/ascq=0x29/0x0], continue. INQUIRY should not yield
+ * UNIT_ATTENTION but many buggy devices do so anyway.
+ */
+ struct scsi_failure failures[] = {
+ {
+ .sense = UNIT_ATTENTION,
+ .asc = 0x28,
+ .ascq = 0,
+ .allowed = 3,
+ .result = SAM_STAT_CHECK_CONDITION,
+ },
+ {
+ .sense = UNIT_ATTENTION,
+ .asc = 0x29,
+ .ascq = 0,
+ .allowed = 3,
+ .result = SAM_STAT_CHECK_CONDITION,
+ },
+ {},
+ };
*bflags = 0;
@@ -677,28 +699,13 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
inq_result, try_inquiry_len, &sshdr,
HZ / 2 + HZ * scsi_inq_timeout, 3,
- &resid, NULL);
+ &resid, failures);
SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
"scsi scan: INQUIRY %s with code 0x%x\n",
result ? "failed" : "successful", result));
- if (result > 0) {
- /*
- * not-ready to ready transition [asc/ascq=0x28/0x0]
- * or power-on, reset [asc/ascq=0x29/0x0], continue.
- * INQUIRY should not yield UNIT_ATTENTION
- * but many buggy devices do so anyway.
- */
- if (scsi_status_is_check_condition(result) &&
- scsi_sense_valid(&sshdr)) {
- if ((sshdr.sense_key == UNIT_ATTENTION) &&
- ((sshdr.asc == 0x28) ||
- (sshdr.asc == 0x29)) &&
- (sshdr.ascq == 0))
- continue;
- }
- } else if (result == 0) {
+ if (result == 0) {
/*
* if nothing was transferred, we try
* again. It's a workaround for some USB
This has scsi_probe_lun ask scsi-ml to retry UAs instead of driving them itself. Signed-off-by: Mike Christie <michael.christie@oracle.com> --- drivers/scsi/scsi_scan.c | 41 +++++++++++++++++++++++----------------- 1 file changed, 24 insertions(+), 17 deletions(-)