@@ -175,13 +175,13 @@ static enum sas_device_type to_dev_type(struct discover_resp *dr)
return dr->attached_dev_type;
}
-static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
+static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
+ struct smp_disc_resp *disc_resp)
{
enum sas_device_type dev_type;
enum sas_linkrate linkrate;
u8 sas_addr[SAS_ADDR_SIZE];
- struct smp_resp *resp = rsp;
- struct discover_resp *dr = &resp->disc;
+ struct discover_resp *dr = &disc_resp->disc;
struct sas_ha_struct *ha = dev->port->ha;
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *phy = &ex->ex_phy[phy_id];
@@ -198,7 +198,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
BUG_ON(!phy->phy);
}
- switch (resp->result) {
+ switch (disc_resp->result) {
case SMP_RESP_PHY_VACANT:
phy->phy_state = PHY_VACANT;
break;
@@ -347,12 +347,13 @@ struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id)
}
#define DISCOVER_REQ_SIZE 16
-#define DISCOVER_RESP_SIZE 56
+#define DISCOVER_RESP_SIZE sizeof(struct smp_disc_resp)
static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
- u8 *disc_resp, int single)
+ struct smp_disc_resp *disc_resp,
+ int single)
{
- struct discover_resp *dr;
+ struct discover_resp *dr = &disc_resp->disc;
int res;
disc_req[9] = single;
@@ -361,7 +362,6 @@ static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
disc_resp, DISCOVER_RESP_SIZE);
if (res)
return res;
- dr = &((struct smp_resp *)disc_resp)->disc;
if (memcmp(dev->sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE) == 0) {
pr_notice("Found loopback topology, just ignore it!\n");
return 0;
@@ -375,7 +375,7 @@ int sas_ex_phy_discover(struct domain_device *dev, int single)
struct expander_device *ex = &dev->ex_dev;
int res = 0;
u8 *disc_req;
- u8 *disc_resp;
+ struct smp_disc_resp *disc_resp;
disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
if (!disc_req)
@@ -1657,7 +1657,7 @@ int sas_discover_root_expander(struct domain_device *dev)
/* ---------- Domain revalidation ---------- */
static int sas_get_phy_discover(struct domain_device *dev,
- int phy_id, struct smp_resp *disc_resp)
+ int phy_id, struct smp_disc_resp *disc_resp)
{
int res;
u8 *disc_req;
@@ -1673,10 +1673,8 @@ static int sas_get_phy_discover(struct domain_device *dev,
disc_resp, DISCOVER_RESP_SIZE);
if (res)
goto out;
- else if (disc_resp->result != SMP_RESP_FUNC_ACC) {
+ if (disc_resp->result != SMP_RESP_FUNC_ACC)
res = disc_resp->result;
- goto out;
- }
out:
kfree(disc_req);
return res;
@@ -1686,7 +1684,7 @@ static int sas_get_phy_change_count(struct domain_device *dev,
int phy_id, int *pcc)
{
int res;
- struct smp_resp *disc_resp;
+ struct smp_disc_resp *disc_resp;
disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
if (!disc_resp)
@@ -1704,19 +1702,17 @@ static int sas_get_phy_attached_dev(struct domain_device *dev, int phy_id,
u8 *sas_addr, enum sas_device_type *type)
{
int res;
- struct smp_resp *disc_resp;
- struct discover_resp *dr;
+ struct smp_disc_resp *disc_resp;
disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
if (!disc_resp)
return -ENOMEM;
- dr = &disc_resp->disc;
res = sas_get_phy_discover(dev, phy_id, disc_resp);
if (res == 0) {
memcpy(sas_addr, disc_resp->disc.attached_sas_addr,
SAS_ADDR_SIZE);
- *type = to_dev_type(dr);
+ *type = to_dev_type(&disc_resp->disc);
if (*type == 0)
memset(sas_addr, 0, SAS_ADDR_SIZE);
}
@@ -471,18 +471,6 @@ struct report_phy_sata_resp {
__be32 crc;
} __attribute__ ((packed));
-struct smp_resp {
- u8 frame_type;
- u8 function;
- u8 result;
- u8 reserved;
- union {
- struct report_general_resp rg;
- struct discover_resp disc;
- struct report_phy_sata_resp rps;
- };
-} __attribute__ ((packed));
-
#elif defined(__BIG_ENDIAN_BITFIELD)
struct sas_identify_frame {
/* Byte 0 */
@@ -704,6 +692,18 @@ struct report_phy_sata_resp {
__be32 crc;
} __attribute__ ((packed));
+#else
+#error "Bitfield order not defined!"
+#endif
+
+struct smp_disc_resp {
+ u8 frame_type;
+ u8 function;
+ u8 result;
+ u8 reserved;
+ struct discover_resp disc;
+} __attribute__ ((packed));
+
struct smp_resp {
u8 frame_type;
u8 function;
@@ -716,8 +716,4 @@ struct smp_resp {
};
} __attribute__ ((packed));
-#else
-#error "Bitfield order not defined!"
-#endif
-
#endif /* _SAS_H_ */
When compiling with gcc 12, several warnings are thrown by gcc when compiling drivers/scsi/libsas/sas_expander.c, e.g.: In function ‘sas_get_phy_change_count’, inlined from ‘sas_find_bcast_phy.constprop’ at drivers/scsi/libsas/sas_expander.c:1737:9: drivers/scsi/libsas/sas_expander.c:1697:39: warning: array subscript ‘struct smp_resp[0]’ is partly outside array bounds of ‘unsigned char[56]’ [-Warray-bounds] 1697 | *pcc = disc_resp->disc.change_count; | ~~~~~~~~~~~~~~~^~~~~~~~~~~~~ This is due to the use of the struct smp_resp to aggregate all possible response types using a union but allocating a response buffer with a size exactly equal to the size of the response type needed. This leads to access to fields of struct smp_resp from an allocated memory area that is smaller than the size of struct smp_resp. Fix this by defining struct smp_disc_resp for sas discovery operations. Since this structure and the generic struct smp_resp are identical for the little endian and big endian archs, move the definition of these structures at the end of include/scsi/sas.h to avoid repeating their definition. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> --- drivers/scsi/libsas/sas_expander.c | 32 +++++++++++++----------------- include/scsi/sas.h | 28 +++++++++++--------------- 2 files changed, 26 insertions(+), 34 deletions(-)