@@ -12188,7 +12188,7 @@ lpfc_sli_enable_msi(struct lpfc_hba *phba)
rc = pci_enable_msi(phba->pcidev);
if (!rc)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0462 PCI enable MSI mode success.\n");
+ "0012 PCI enable MSI mode success.\n");
else {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0471 PCI enable MSI mode failed (%d)\n", rc);
@@ -1930,7 +1930,7 @@ lpfc_issue_cmf_sync_wqe(struct lpfc_hba *phba, u32 ms, u64 total)
sync_buf = __lpfc_sli_get_iocbq(phba);
if (!sync_buf) {
lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT,
- "6213 No available WQEs for CMF_SYNC_WQE\n");
+ "6244 No available WQEs for CMF_SYNC_WQE\n");
ret_val = ENOMEM;
goto out_unlock;
}
@@ -3805,7 +3805,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
set_job_ulpword4(cmdiocbp,
IOERR_ABORT_REQUESTED);
/*
- * For SLI4, irsiocb contains
+ * For SLI4, irspiocb contains
* NO_XRI in sli_xritag, it
* shall not affect releasing
* sgl (xri) process.
@@ -3823,7 +3823,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
}
}
- (cmdiocbp->cmd_cmpl) (phba, cmdiocbp, saveq);
+ cmdiocbp->cmd_cmpl(phba, cmdiocbp, saveq);
} else
lpfc_sli_release_iocbq(phba, cmdiocbp);
} else {
@@ -4063,8 +4063,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
cmdiocbq->cmd_flag &= ~LPFC_DRIVER_ABORTED;
if (cmdiocbq->cmd_cmpl) {
spin_unlock_irqrestore(&phba->hbalock, iflag);
- (cmdiocbq->cmd_cmpl)(phba, cmdiocbq,
- &rspiocbq);
+ cmdiocbq->cmd_cmpl(phba, cmdiocbq, &rspiocbq);
spin_lock_irqsave(&phba->hbalock, iflag);
}
break;
@@ -10288,7 +10287,7 @@ __lpfc_sli_issue_iocb_s3(struct lpfc_hba *phba, uint32_t ring_number,
* @flag: Flag indicating if this command can be put into txq.
*
* __lpfc_sli_issue_fcp_io_s3 is wrapper function to invoke lockless func to
- * send an iocb command to an HBA with SLI-4 interface spec.
+ * send an iocb command to an HBA with SLI-3 interface spec.
*
* This function takes the hbalock before invoking the lockless version.
* The function will return success after it successfully submit the wqe to
@@ -12740,7 +12739,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
cmdiocbq->cmd_cmpl = cmdiocbq->wait_cmd_cmpl;
cmdiocbq->wait_cmd_cmpl = NULL;
if (cmdiocbq->cmd_cmpl)
- (cmdiocbq->cmd_cmpl)(phba, cmdiocbq, NULL);
+ cmdiocbq->cmd_cmpl(phba, cmdiocbq, NULL);
else
lpfc_sli_release_iocbq(phba, cmdiocbq);
return;
@@ -12754,9 +12753,9 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
/* Set the exchange busy flag for task management commands */
if ((cmdiocbq->cmd_flag & LPFC_IO_FCP) &&
- !(cmdiocbq->cmd_flag & LPFC_IO_LIBDFC)) {
+ !(cmdiocbq->cmd_flag & LPFC_IO_LIBDFC)) {
lpfc_cmd = container_of(cmdiocbq, struct lpfc_io_buf,
- cur_iocbq);
+ cur_iocbq);
if (rspiocbq && (rspiocbq->cmd_flag & LPFC_EXCHANGE_BUSY))
lpfc_cmd->flags |= LPFC_SBUF_XBUSY;
else
@@ -13896,7 +13895,7 @@ void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *phba)
* @irspiocbq: Pointer to work-queue completion queue entry.
*
* This routine handles an ELS work-queue completion event and construct
- * a pseudo response ELS IODBQ from the SLI4 ELS WCQE for the common
+ * a pseudo response ELS IOCBQ from the SLI4 ELS WCQE for the common
* discovery engine to handle.
*
* Return: Pointer to the receive IOCBQ, NULL otherwise.
@@ -13940,7 +13939,7 @@ lpfc_sli4_els_preprocess_rspiocbq(struct lpfc_hba *phba,
if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
spin_lock_irqsave(&phba->hbalock, iflags);
- cmdiocbq->cmd_flag |= LPFC_EXCHANGE_BUSY;
+ irspiocbq->cmd_flag |= LPFC_EXCHANGE_BUSY;
spin_unlock_irqrestore(&phba->hbalock, iflags);
}
@@ -14799,7 +14798,7 @@ lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
/* Pass the cmd_iocb and the wcqe to the upper layer */
memcpy(&cmdiocbq->wcqe_cmpl, wcqe,
sizeof(struct lpfc_wcqe_complete));
- (cmdiocbq->cmd_cmpl)(phba, cmdiocbq, cmdiocbq);
+ cmdiocbq->cmd_cmpl(phba, cmdiocbq, cmdiocbq);
} else {
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"0375 FCP cmdiocb not callback function "
@@ -18956,7 +18955,7 @@ lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *vport,
/* Free iocb created in lpfc_prep_seq */
list_for_each_entry_safe(curr_iocb, next_iocb,
- &iocbq->list, list) {
+ &iocbq->list, list) {
list_del_init(&curr_iocb->list);
lpfc_sli_release_iocbq(phba, curr_iocb);
}
Following refactoring and consolidation in SLI processing, fixup some minor issues related to SLI path. - Correct the setting of LPFC_EXCHANGE_BUSY flag in response iocb. - Fix some typographical errors. - Fix duplicate log messages. Fixes: 1b64aa9eae28 ("scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4") Cc: <stable@vger.kernel.org> # v5.18 Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> --- drivers/scsi/lpfc/lpfc_init.c | 2 +- drivers/scsi/lpfc/lpfc_sli.c | 25 ++++++++++++------------- 2 files changed, 13 insertions(+), 14 deletions(-)