@@ -544,6 +544,7 @@ struct mpi3mr_sdev_priv_data {
* @ioc_status: IOC status from the firmware
* @ioc_loginfo:IOC log info from the firmware
* @is_waiting: Is the command issued in block mode
+ * @is_sense: Is Sense data present
* @retry_count: Retry count for retriable commands
* @host_tag: Host tag used by the command
* @callback: Callback for non blocking commands
@@ -559,6 +560,7 @@ struct mpi3mr_drv_cmd {
u16 ioc_status;
u32 ioc_loginfo;
u8 is_waiting;
+ u8 is_sense;
u8 retry_count;
u16 host_tag;
@@ -980,5 +982,11 @@ int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc,
int mpi3mr_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num);
void mpi3mr_bsg_init(struct mpi3mr_ioc *mrioc);
void mpi3mr_bsg_exit(struct mpi3mr_ioc *mrioc);
+int mpi3mr_issue_tm(struct mpi3mr_ioc *mrioc, u8 tm_type,
+ u16 handle, uint lun, u16 htag, ulong timeout,
+ struct mpi3mr_drv_cmd *drv_cmd,
+ u8 *resp_code, struct scsi_cmnd *scmd);
+struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_handle(
+ struct mpi3mr_ioc *mrioc, u16 handle);
#endif /*MPI3MR_H_INCLUDED*/
@@ -200,7 +200,6 @@ static long mpi3mr_get_all_tgt_info(struct mpi3mr_ioc *mrioc,
kfree(alltgt_info);
return rval;
}
-
/**
* mpi3mr_get_change_count - Get topology change count
* @mrioc: Adapter instance reference
@@ -390,6 +389,521 @@ static long mpi3mr_bsg_process_drv_cmds(struct bsg_job *job)
return rval;
}
+/**
+ * mpi3mr_bsg_build_sgl - SGL construction for MPI commands
+ * @mpi_req: MPI request
+ * @sgl_offset: offset to start sgl in the MPI request
+ * @drv_bufs: DMA address of the buffers to be placed in sgl
+ * @bufcnt: Number of DMA buffers
+ * @is_rmc: Does the buffer list has management command buffer
+ * @is_rmr: Does the buffer list has management response buffer
+ * @num_datasges: Number of data buffers in the list
+ *
+ * This function places the DMA address of the given buffers in
+ * proper format as SGEs in the given MPI request.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_bsg_build_sgl(u8 *mpi_req, uint32_t sgl_offset,
+ struct mpi3mr_buf_map *drv_bufs, u8 bufcnt, u8 is_rmc,
+ u8 is_rmr, u8 num_datasges)
+{
+ u8 *sgl = (mpi_req + sgl_offset), count = 0;
+ struct mpi3_mgmt_passthrough_request *rmgmt_req =
+ (struct mpi3_mgmt_passthrough_request *)mpi_req;
+ struct mpi3mr_buf_map *drv_buf_iter = drv_bufs;
+ u8 sgl_flags, sgl_flags_last;
+
+ sgl_flags = MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE |
+ MPI3_SGE_FLAGS_DLAS_SYSTEM | MPI3_SGE_FLAGS_END_OF_BUFFER;
+ sgl_flags_last = sgl_flags | MPI3_SGE_FLAGS_END_OF_LIST;
+
+ if (is_rmc) {
+ mpi3mr_add_sg_single(&rmgmt_req->command_sgl,
+ sgl_flags_last, drv_buf_iter->kern_buf_len,
+ drv_buf_iter->kern_buf_dma);
+ sgl = (u8 *)drv_buf_iter->kern_buf + drv_buf_iter->bsg_buf_len;
+ drv_buf_iter++;
+ count++;
+ if (is_rmr) {
+ mpi3mr_add_sg_single(&rmgmt_req->response_sgl,
+ sgl_flags_last, drv_buf_iter->kern_buf_len,
+ drv_buf_iter->kern_buf_dma);
+ drv_buf_iter++;
+ count++;
+ } else
+ mpi3mr_build_zero_len_sge(
+ &rmgmt_req->response_sgl);
+ }
+ if (!num_datasges) {
+ mpi3mr_build_zero_len_sge(sgl);
+ return;
+ }
+ for (; count < bufcnt; count++, drv_buf_iter++) {
+ if (drv_buf_iter->data_dir == DMA_NONE)
+ continue;
+ if (num_datasges == 1 || !is_rmc)
+ mpi3mr_add_sg_single(sgl, sgl_flags_last,
+ drv_buf_iter->kern_buf_len, drv_buf_iter->kern_buf_dma);
+ else
+ mpi3mr_add_sg_single(sgl, sgl_flags,
+ drv_buf_iter->kern_buf_len, drv_buf_iter->kern_buf_dma);
+ sgl += sizeof(struct mpi3_sge_common);
+ num_datasges--;
+ }
+}
+
+/**
+ * mpi3mr_bsg_process_mpt_cmds - MPI Pass through BSG handler
+ * @job: BSG job reference
+ *
+ * This function is the top level handler for MPI Pass through
+ * command, this does basic validation of the input data buffers,
+ * identifies the given buffer types and MPI command, allocates
+ * DMAable memory for user given buffers, construstcs SGL
+ * properly and passes the command to the firmware.
+ *
+ * Once the MPI command is completed the driver copies the data
+ * if any and reply, sense information to user provided buffers.
+ * If the command is timed out then issues controller reset
+ * prior to returning.
+ *
+ * Return: 0 on success and proper error codes on failure
+ */
+
+static long mpi3mr_bsg_process_mpt_cmds(struct bsg_job *job)
+{
+ long rval = -EINVAL;
+
+ struct mpi3mr_ioc *mrioc = NULL;
+ u8 *mpi_req = NULL, *sense_buff_k = NULL;
+ u8 mpi_msg_size = 0;
+ struct mpi3mr_bsg_packet *bsg_req = NULL;
+ struct mpi3mr_bsg_mptcmd *karg;
+ struct mpi3mr_buf_entry *buf_entries = NULL;
+ struct mpi3mr_buf_map *drv_bufs = NULL, *drv_buf_iter = NULL;
+ u8 count, bufcnt = 0, is_rmcb = 0, is_rmrb = 0, din_cnt = 0, dout_cnt = 0;
+ u8 invalid_be = 0, erb_offset = 0xFF, mpirep_offset = 0xFF, sg_entries = 0;
+ u8 block_io = 0, resp_code = 0;
+ struct mpi3_request_header *mpi_header = NULL;
+ struct mpi3_status_reply_descriptor *status_desc;
+ struct mpi3_scsi_task_mgmt_request *tm_req;
+ u32 erbsz = MPI3MR_SENSE_BUF_SZ, tmplen;
+ u16 dev_handle;
+ struct mpi3mr_tgt_dev *tgtdev;
+ struct mpi3mr_stgt_priv_data *stgt_priv = NULL;
+ struct mpi3mr_bsg_in_reply_buf *bsg_reply_buf = NULL;
+ u32 din_size = 0, dout_size = 0;
+ u8 *din_buf = NULL, *dout_buf = NULL;
+ u8 *sgl_iter = NULL, *sgl_din_iter = NULL, *sgl_dout_iter = NULL;
+
+ bsg_req = job->request;
+ karg = (struct mpi3mr_bsg_mptcmd *)&bsg_req->cmd.mptcmd;
+
+ mpi3mr_bsg_verify_adapter(karg->mrioc_id, &mrioc);
+ if (!mrioc)
+ return -ENODEV;
+
+ if (karg->timeout < MPI3MR_APP_DEFAULT_TIMEOUT)
+ karg->timeout = MPI3MR_APP_DEFAULT_TIMEOUT;
+
+ mpi_req = kzalloc(MPI3MR_ADMIN_REQ_FRAME_SZ, GFP_KERNEL);
+ if (!mpi_req)
+ return -ENOMEM;
+ mpi_header = (struct mpi3_request_header *)mpi_req;
+
+ bufcnt = karg->buf_entry_list.num_of_entries;
+ drv_bufs = kzalloc((sizeof(*drv_bufs) * bufcnt), GFP_KERNEL);
+ if (!drv_bufs) {
+ rval = -ENOMEM;
+ goto out;
+ }
+
+ dout_buf = kzalloc(job->request_payload.payload_len,
+ GFP_KERNEL);
+ if (!dout_buf) {
+ rval = -ENOMEM;
+ goto out;
+ }
+
+ din_buf = kzalloc(job->reply_payload.payload_len,
+ GFP_KERNEL);
+ if (!din_buf) {
+ rval = -ENOMEM;
+ goto out;
+ }
+
+ sg_copy_to_buffer(job->request_payload.sg_list,
+ job->request_payload.sg_cnt,
+ dout_buf, job->request_payload.payload_len);
+
+ buf_entries = karg->buf_entry_list.buf_entry;
+ sgl_din_iter = din_buf;
+ sgl_dout_iter = dout_buf;
+ drv_buf_iter = drv_bufs;
+
+ for (count = 0; count < bufcnt; count++, buf_entries++, drv_buf_iter++) {
+
+ if (sgl_dout_iter > (dout_buf + job->request_payload.payload_len)) {
+ dprint_bsg_err(mrioc, "%s: data_out buffer length mismatch\n",
+ __func__);
+ rval = -EINVAL;
+ goto out;
+ }
+ if (sgl_din_iter > (din_buf + job->reply_payload.payload_len)) {
+ dprint_bsg_err(mrioc, "%s: data_in buffer length mismatch\n",
+ __func__);
+ rval = -EINVAL;
+ goto out;
+ }
+
+ switch (buf_entries->buf_type) {
+ case MPI3MR_BSG_BUFTYPE_RAIDMGMT_CMD:
+ sgl_iter = sgl_dout_iter;
+ sgl_dout_iter += buf_entries->buf_len;
+ drv_buf_iter->data_dir = DMA_TO_DEVICE;
+ is_rmcb = 1;
+ if (count != 0)
+ invalid_be = 1;
+ break;
+ case MPI3MR_BSG_BUFTYPE_RAIDMGMT_RESP:
+ sgl_iter = sgl_din_iter;
+ sgl_din_iter += buf_entries->buf_len;
+ drv_buf_iter->data_dir = DMA_FROM_DEVICE;
+ is_rmrb = 1;
+ if (count != 1 || !is_rmcb)
+ invalid_be = 1;
+ break;
+ case MPI3MR_BSG_BUFTYPE_DATA_IN:
+ sgl_iter = sgl_din_iter;
+ sgl_din_iter += buf_entries->buf_len;
+ drv_buf_iter->data_dir = DMA_FROM_DEVICE;
+ din_cnt++;
+ din_size += drv_buf_iter->bsg_buf_len;
+ if ((din_cnt > 1) && !is_rmcb)
+ invalid_be = 1;
+ break;
+ case MPI3MR_BSG_BUFTYPE_DATA_OUT:
+ sgl_iter = sgl_dout_iter;
+ sgl_dout_iter += buf_entries->buf_len;
+ drv_buf_iter->data_dir = DMA_TO_DEVICE;
+ dout_cnt++;
+ dout_size += drv_buf_iter->bsg_buf_len;
+ if ((dout_cnt > 1) && !is_rmcb)
+ invalid_be = 1;
+ break;
+ case MPI3MR_BSG_BUFTYPE_MPI_REPLY:
+ sgl_iter = sgl_din_iter;
+ sgl_din_iter += buf_entries->buf_len;
+ drv_buf_iter->data_dir = DMA_NONE;
+ mpirep_offset = count;
+ break;
+ case MPI3MR_BSG_BUFTYPE_ERR_RESPONSE:
+ sgl_iter = sgl_din_iter;
+ sgl_din_iter += buf_entries->buf_len;
+ drv_buf_iter->data_dir = DMA_NONE;
+ erb_offset = count;
+ break;
+ case MPI3MR_BSG_BUFTYPE_MPI_REQUEST:
+ sgl_iter = sgl_dout_iter;
+ sgl_dout_iter += buf_entries->buf_len;
+ drv_buf_iter->data_dir = DMA_NONE;
+ mpi_msg_size = buf_entries->buf_len;
+ if ((!mpi_msg_size || (mpi_msg_size % 4)) ||
+ (mpi_msg_size > MPI3MR_ADMIN_REQ_FRAME_SZ)) {
+ dprint_bsg_err(mrioc, "%s: invalid MPI message size\n",
+ __func__);
+ rval = -EINVAL;
+ goto out;
+ }
+ memcpy(mpi_req, sgl_iter, buf_entries->buf_len);
+ break;
+ default:
+ invalid_be = 1;
+ break;
+ }
+ if (invalid_be) {
+ dprint_bsg_err(mrioc, "%s: invalid buffer entries passed\n",
+ __func__);
+ rval = -EINVAL;
+ goto out;
+ }
+
+ drv_buf_iter->bsg_buf = sgl_iter;
+ drv_buf_iter->bsg_buf_len = buf_entries->buf_len;
+
+ }
+ if (!is_rmcb && (dout_cnt || din_cnt)) {
+ sg_entries = dout_cnt + din_cnt;
+ if (((mpi_msg_size) + (sg_entries *
+ sizeof(struct mpi3_sge_common))) > MPI3MR_ADMIN_REQ_FRAME_SZ) {
+ dprint_bsg_err(mrioc,
+ "%s:%d: invalid message size passed\n",
+ __func__, __LINE__);
+ rval = -EINVAL;
+ goto out;
+ }
+ }
+ if (din_size > MPI3MR_MAX_APP_XFER_SIZE) {
+ dprint_bsg_err(mrioc,
+ "%s:%d: invalid data transfer size passed for function 0x%x din_size=%d\n",
+ __func__, __LINE__, mpi_header->function, din_size);
+ rval = -EINVAL;
+ goto out;
+ }
+ if (dout_size > MPI3MR_MAX_APP_XFER_SIZE) {
+ dprint_bsg_err(mrioc,
+ "%s:%d: invalid data transfer size passed for function 0x%x dout_size = %d\n",
+ __func__, __LINE__, mpi_header->function, dout_size);
+ rval = -EINVAL;
+ goto out;
+ }
+
+ drv_buf_iter = drv_bufs;
+ for (count = 0; count < bufcnt; count++, drv_buf_iter++) {
+ if (drv_buf_iter->data_dir == DMA_NONE)
+ continue;
+
+ drv_buf_iter->kern_buf_len = drv_buf_iter->bsg_buf_len;
+ if (is_rmcb && !count)
+ drv_buf_iter->kern_buf_len += ((dout_cnt + din_cnt) *
+ sizeof(struct mpi3_sge_common));
+
+ if (!drv_buf_iter->kern_buf_len)
+ continue;
+
+ drv_buf_iter->kern_buf = dma_alloc_coherent(&mrioc->pdev->dev,
+ drv_buf_iter->kern_buf_len, &drv_buf_iter->kern_buf_dma,
+ GFP_KERNEL);
+ if (!drv_buf_iter->kern_buf) {
+ rval = -ENOMEM;
+ goto out;
+ }
+ if (drv_buf_iter->data_dir == DMA_TO_DEVICE) {
+ tmplen = min(drv_buf_iter->kern_buf_len,
+ drv_buf_iter->bsg_buf_len);
+ memcpy(drv_buf_iter->kern_buf, drv_buf_iter->bsg_buf, tmplen);
+ }
+ }
+
+ if (erb_offset != 0xFF) {
+ sense_buff_k = kzalloc(erbsz, GFP_KERNEL);
+ if (!sense_buff_k) {
+ rval = -ENOMEM;
+ goto out;
+ }
+ }
+
+ if (mutex_lock_interruptible(&mrioc->bsg_cmds.mutex)) {
+ rval = -ERESTARTSYS;
+ goto out;
+ }
+ if (mrioc->bsg_cmds.state & MPI3MR_CMD_PENDING) {
+ rval = -EAGAIN;
+ dprint_bsg_err(mrioc, "%s: command is in use\n", __func__);
+ mutex_unlock(&mrioc->bsg_cmds.mutex);
+ goto out;
+ }
+ if (mrioc->unrecoverable) {
+ dprint_bsg_err(mrioc, "%s: unrecoverable controller\n",
+ __func__);
+ rval = -EFAULT;
+ mutex_unlock(&mrioc->bsg_cmds.mutex);
+ goto out;
+ }
+ if (mrioc->reset_in_progress) {
+ dprint_bsg_err(mrioc, "%s: reset in progress\n", __func__);
+ rval = -EAGAIN;
+ mutex_unlock(&mrioc->bsg_cmds.mutex);
+ goto out;
+ }
+ if (mrioc->stop_bsgs) {
+ dprint_bsg_err(mrioc, "%s: bsgs are blocked\n", __func__);
+ rval = -EAGAIN;
+ mutex_unlock(&mrioc->bsg_cmds.mutex);
+ goto out;
+ }
+
+ if (mpi_header->function != MPI3_FUNCTION_NVME_ENCAPSULATED) {
+ mpi3mr_bsg_build_sgl(mpi_req, (mpi_msg_size),
+ drv_bufs, bufcnt, is_rmcb, is_rmrb,
+ (dout_cnt + din_cnt));
+ }
+
+ if (mpi_header->function == MPI3_FUNCTION_SCSI_TASK_MGMT) {
+ tm_req = (struct mpi3_scsi_task_mgmt_request *)mpi_req;
+ if (tm_req->task_type !=
+ MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
+ dev_handle = tm_req->dev_handle;
+ block_io = 1;
+ }
+ }
+ if (block_io) {
+ tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle);
+ if (tgtdev && tgtdev->starget && tgtdev->starget->hostdata) {
+ stgt_priv = (struct mpi3mr_stgt_priv_data *)
+ tgtdev->starget->hostdata;
+ atomic_inc(&stgt_priv->block_io);
+ mpi3mr_tgtdev_put(tgtdev);
+ }
+ }
+
+ mrioc->bsg_cmds.state = MPI3MR_CMD_PENDING;
+ mrioc->bsg_cmds.is_waiting = 1;
+ mrioc->bsg_cmds.callback = NULL;
+ mrioc->bsg_cmds.is_sense = 0;
+ mrioc->bsg_cmds.sensebuf = sense_buff_k;
+ memset(mrioc->bsg_cmds.reply, 0, mrioc->reply_sz);
+ mpi_header->host_tag = cpu_to_le16(MPI3MR_HOSTTAG_BSG_CMDS);
+ if (mrioc->logging_level & MPI3_DEBUG_BSG_INFO) {
+ dprint_bsg_info(mrioc,
+ "%s: posting bsg request to the controller\n", __func__);
+ dprint_dump(mpi_req, MPI3MR_ADMIN_REQ_FRAME_SZ,
+ "bsg_mpi3_req");
+ if (mpi_header->function == MPI3_FUNCTION_MGMT_PASSTHROUGH) {
+ drv_buf_iter = &drv_bufs[0];
+ dprint_dump(drv_buf_iter->kern_buf,
+ drv_buf_iter->kern_buf_len, "mpi3_mgmt_req");
+ }
+ }
+
+ init_completion(&mrioc->bsg_cmds.done);
+ rval = mpi3mr_admin_request_post(mrioc, mpi_req,
+ MPI3MR_ADMIN_REQ_FRAME_SZ, 0);
+
+
+ if (rval) {
+ mrioc->bsg_cmds.is_waiting = 0;
+ dprint_bsg_err(mrioc,
+ "%s: posting bsg request is failed\n", __func__);
+ rval = -EAGAIN;
+ goto out_unlock;
+ }
+ wait_for_completion_timeout(&mrioc->bsg_cmds.done,
+ (karg->timeout * HZ));
+ if (block_io && stgt_priv)
+ atomic_dec(&stgt_priv->block_io);
+ if (!(mrioc->bsg_cmds.state & MPI3MR_CMD_COMPLETE)) {
+ mrioc->bsg_cmds.is_waiting = 0;
+ rval = -EAGAIN;
+ if (mrioc->bsg_cmds.state & MPI3MR_CMD_RESET)
+ goto out_unlock;
+ dprint_bsg_err(mrioc,
+ "%s: bsg request timedout after %d seconds\n", __func__,
+ karg->timeout);
+ if (mrioc->logging_level & MPI3_DEBUG_BSG_ERROR) {
+ dprint_dump(mpi_req, MPI3MR_ADMIN_REQ_FRAME_SZ,
+ "bsg_mpi3_req");
+ if (mpi_header->function ==
+ MPI3_FUNCTION_MGMT_PASSTHROUGH) {
+ drv_buf_iter = &drv_bufs[0];
+ dprint_dump(drv_buf_iter->kern_buf,
+ drv_buf_iter->kern_buf_len, "mpi3_mgmt_req");
+ }
+ }
+
+ if (mpi_header->function == MPI3_FUNCTION_SCSI_IO)
+ mpi3mr_issue_tm(mrioc,
+ MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
+ mpi_header->function_dependent, 0,
+ MPI3MR_HOSTTAG_BLK_TMS, MPI3MR_RESETTM_TIMEOUT,
+ &mrioc->host_tm_cmds, &resp_code, NULL);
+ if (!(mrioc->bsg_cmds.state & MPI3MR_CMD_COMPLETE) &&
+ !(mrioc->bsg_cmds.state & MPI3MR_CMD_RESET))
+ mpi3mr_soft_reset_handler(mrioc,
+ MPI3MR_RESET_FROM_APP_TIMEOUT, 1);
+ goto out_unlock;
+ }
+ dprint_bsg_info(mrioc, "%s: bsg request is completed\n", __func__);
+
+ if ((mrioc->bsg_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+ != MPI3_IOCSTATUS_SUCCESS) {
+ dprint_bsg_info(mrioc,
+ "%s: command failed, ioc_status(0x%04x) log_info(0x%08x)\n",
+ __func__,
+ (mrioc->bsg_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+ mrioc->bsg_cmds.ioc_loginfo);
+ }
+
+ if ((mpirep_offset != 0xFF) &&
+ drv_bufs[mpirep_offset].bsg_buf_len) {
+ drv_buf_iter = &drv_bufs[mpirep_offset];
+ drv_buf_iter->kern_buf_len = (sizeof(*bsg_reply_buf) - 1 +
+ mrioc->reply_sz);
+ bsg_reply_buf = kzalloc(drv_buf_iter->kern_buf_len, GFP_KERNEL);
+
+ if (!bsg_reply_buf) {
+ rval = -ENOMEM;
+ goto out_unlock;
+ }
+ if (mrioc->bsg_cmds.state & MPI3MR_CMD_REPLY_VALID) {
+ bsg_reply_buf->mpi_reply_type =
+ MPI3MR_BSG_MPI_REPLY_BUFTYPE_ADDRESS;
+ memcpy(bsg_reply_buf->reply_buf,
+ mrioc->bsg_cmds.reply, mrioc->reply_sz);
+ } else {
+ bsg_reply_buf->mpi_reply_type =
+ MPI3MR_BSG_MPI_REPLY_BUFTYPE_STATUS;
+ status_desc = (struct mpi3_status_reply_descriptor *)
+ bsg_reply_buf->reply_buf;
+ status_desc->ioc_status = mrioc->bsg_cmds.ioc_status;
+ status_desc->ioc_log_info = mrioc->bsg_cmds.ioc_loginfo;
+ }
+ tmplen = min(drv_buf_iter->kern_buf_len,
+ drv_buf_iter->bsg_buf_len);
+ memcpy(drv_buf_iter->bsg_buf, bsg_reply_buf, tmplen);
+ }
+
+ if (erb_offset != 0xFF && mrioc->bsg_cmds.sensebuf &&
+ mrioc->bsg_cmds.is_sense) {
+ drv_buf_iter = &drv_bufs[erb_offset];
+ tmplen = min(erbsz, drv_buf_iter->bsg_buf_len);
+ memcpy(drv_buf_iter->bsg_buf, sense_buff_k, tmplen);
+ }
+
+ drv_buf_iter = drv_bufs;
+ for (count = 0; count < bufcnt; count++, drv_buf_iter++) {
+ if (drv_buf_iter->data_dir == DMA_NONE)
+ continue;
+ if (drv_buf_iter->data_dir == DMA_FROM_DEVICE) {
+ tmplen = min(drv_buf_iter->kern_buf_len,
+ drv_buf_iter->bsg_buf_len);
+ memcpy(drv_buf_iter->bsg_buf,
+ drv_buf_iter->kern_buf, tmplen);
+ }
+ }
+
+out_unlock:
+ if (din_buf) {
+ job->reply_payload_rcv_len =
+ sg_copy_from_buffer(job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt,
+ din_buf, job->reply_payload.payload_len);
+ }
+ mrioc->bsg_cmds.is_sense = 0;
+ mrioc->bsg_cmds.sensebuf = NULL;
+ mrioc->bsg_cmds.state = MPI3MR_CMD_NOTUSED;
+ mutex_unlock(&mrioc->bsg_cmds.mutex);
+out:
+ kfree(sense_buff_k);
+ kfree(dout_buf);
+ kfree(din_buf);
+ kfree(mpi_req);
+ if (drv_bufs) {
+ drv_buf_iter = drv_bufs;
+ for (count = 0; count < bufcnt; count++, drv_buf_iter++) {
+ if (drv_buf_iter->kern_buf && drv_buf_iter->kern_buf_dma)
+ dma_free_coherent(&mrioc->pdev->dev,
+ drv_buf_iter->kern_buf_len,
+ drv_buf_iter->kern_buf,
+ drv_buf_iter->kern_buf_dma);
+ }
+ kfree(drv_bufs);
+ }
+ kfree(bsg_reply_buf);
+ return rval;
+}
+
/**
* mpi3mr_bsg_request - bsg request entry point
* @job: BSG job reference
@@ -407,6 +921,9 @@ int mpi3mr_bsg_request(struct bsg_job *job)
case MPI3MR_DRV_CMD:
rval = mpi3mr_bsg_process_drv_cmds(job);
break;
+ case MPI3MR_MPT_CMD:
+ rval = mpi3mr_bsg_process_mpt_cmds(job);
+ break;
default:
pr_err("%s: unsupported BSG command(0x%08x)\n",
MPI3MR_DRIVER_NAME, bsg_req->cmd_type);
@@ -124,6 +124,31 @@
#endif /* MPT3SAS_DEBUG_H_INCLUDED */
+/**
+ * dprint_dump - print contents of a memory buffer
+ * @req: Pointer to a memory buffer
+ * @sz: Memory buffer size
+ * @namestr: Name String to identify the buffer type
+ */
+static inline void
+dprint_dump(void *req, int sz, const char *name_string)
+{
+ int i;
+ __le32 *mfp = (__le32 *)req;
+
+ sz = sz/4;
+ if (name_string)
+ pr_info("%s:\n\t", name_string);
+ else
+ pr_info("request:\n\t");
+ for (i = 0; i < sz; i++) {
+ if (i && ((i % 8) == 0))
+ pr_info("\n\t");
+ pr_info("%08x ", le32_to_cpu(mfp[i]));
+ }
+ pr_info("\n");
+}
+
/**
* dprint_dump_req - print message frame contents
* @req: pointer to message frame
@@ -634,7 +634,7 @@ static struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_handle(
*
* Return: Target device reference.
*/
-static struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_handle(
+struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_handle(
struct mpi3mr_ioc *mrioc, u16 handle)
{
struct mpi3mr_tgt_dev *tgtdev;
@@ -2996,7 +2996,7 @@ inline void mpi3mr_poll_pend_io_completions(struct mpi3mr_ioc *mrioc)
*
* Return: 0 on success, non-zero on errors
*/
-static int mpi3mr_issue_tm(struct mpi3mr_ioc *mrioc, u8 tm_type,
+int mpi3mr_issue_tm(struct mpi3mr_ioc *mrioc, u8 tm_type,
u16 handle, uint lun, u16 htag, ulong timeout,
struct mpi3mr_drv_cmd *drv_cmd,
u8 *resp_code, struct scsi_cmnd *scmd)
There are certain management commands requiring firmware intervention. These commands are termed as MPT commands. This patch adds support for the same. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> --- drivers/scsi/mpi3mr/mpi3mr.h | 8 + drivers/scsi/mpi3mr/mpi3mr_app.c | 519 ++++++++++++++++++++++++++++- drivers/scsi/mpi3mr/mpi3mr_debug.h | 25 ++ drivers/scsi/mpi3mr/mpi3mr_os.c | 4 +- 4 files changed, 553 insertions(+), 3 deletions(-)