@@ -4048,3 +4048,1138 @@ sli_cqe_async(struct sli4 *sli4, void *buf)
return rc;
}
+
+bool
+sli_fw_ready(struct sli4 *sli4)
+{
+ u32 val;
+
+ /* Determine if the chip FW is in a ready state */
+ val = sli_reg_read_status(sli4);
+ return (val & SLI4_PORT_STATUS_RDY) ? 1 : 0;
+}
+
+static bool
+sli_wait_for_fw_ready(struct sli4 *sli4, u32 timeout_ms)
+{
+ unsigned long end;
+
+ end = jiffies + msecs_to_jiffies(timeout_ms);
+
+ do {
+ if (sli_fw_ready(sli4))
+ return true;
+
+ usleep_range(1000, 2000);
+ } while (time_before(jiffies, end));
+
+ return false;
+}
+
+static bool
+sli_sliport_reset(struct sli4 *sli4)
+{
+ bool rc;
+ u32 val;
+
+ val = SLI4_PORT_CTRL_IP;
+ /* Initialize port, endian */
+ writel(val, (sli4->reg[0] + SLI4_PORT_CTRL_REG));
+
+ rc = sli_wait_for_fw_ready(sli4, SLI4_FW_READY_TIMEOUT_MSEC);
+ if (!rc)
+ efc_log_crit(sli4, "port failed to become ready after initialization\n");
+
+ return rc;
+}
+
+static bool
+sli_fw_init(struct sli4 *sli4)
+{
+ /*
+ * Is firmware ready for operation?
+ */
+ if (!sli_wait_for_fw_ready(sli4, SLI4_FW_READY_TIMEOUT_MSEC)) {
+ efc_log_crit(sli4, "FW status is NOT ready\n");
+ return false;
+ }
+
+ /*
+ * Reset port to a known state
+ */
+ return sli_sliport_reset(sli4);
+}
+
+static int
+sli_request_features(struct sli4 *sli4, u32 *features, bool query)
+{
+ struct sli4_cmd_request_features *req_features = sli4->bmbx.virt;
+
+ if (sli_cmd_request_features(sli4, sli4->bmbx.virt, *features, query)) {
+ efc_log_err(sli4, "bad REQUEST_FEATURES write\n");
+ return EFC_FAIL;
+ }
+
+ if (sli_bmbx_command(sli4)) {
+ efc_log_crit(sli4, "%s: bootstrap mailbox write fail\n",
+ __func__);
+ return EFC_FAIL;
+ }
+
+ if (le16_to_cpu(req_features->hdr.status)) {
+ efc_log_err(sli4, "REQUEST_FEATURES bad status %#x\n",
+ le16_to_cpu(req_features->hdr.status));
+ return EFC_FAIL;
+ }
+
+ *features = le32_to_cpu(req_features->resp);
+ return EFC_SUCCESS;
+}
+
+void
+sli_calc_max_qentries(struct sli4 *sli4)
+{
+ enum sli4_qtype q;
+ u32 qentries;
+
+ for (q = SLI4_QTYPE_EQ; q < SLI4_QTYPE_MAX; q++) {
+ sli4->qinfo.max_qentries[q] =
+ sli_convert_mask_to_count(sli4->qinfo.count_method[q],
+ sli4->qinfo.count_mask[q]);
+ }
+
+ /* single, continguous DMA allocations will be called for each queue
+ * of size (max_qentries * queue entry size); since these can be large,
+ * check against the OS max DMA allocation size
+ */
+ for (q = SLI4_QTYPE_EQ; q < SLI4_QTYPE_MAX; q++) {
+ qentries = sli4->qinfo.max_qentries[q];
+
+ efc_log_info(sli4, "[%s]: max_qentries from %d to %d\n",
+ SLI4_QNAME[q],
+ sli4->qinfo.max_qentries[q], qentries);
+ sli4->qinfo.max_qentries[q] = qentries;
+ }
+}
+
+static int
+sli_get_read_config(struct sli4 *sli4)
+{
+ struct sli4_rsp_read_config *conf = sli4->bmbx.virt;
+ u32 i, total, total_size;
+ u32 *base;
+
+ if (sli_cmd_read_config(sli4, sli4->bmbx.virt)) {
+ efc_log_err(sli4, "bad READ_CONFIG write\n");
+ return EFC_FAIL;
+ }
+
+ if (sli_bmbx_command(sli4)) {
+ efc_log_crit(sli4, "bootstrap mailbox fail (READ_CONFIG)\n");
+ return EFC_FAIL;
+ }
+
+ if (le16_to_cpu(conf->hdr.status)) {
+ efc_log_err(sli4, "READ_CONFIG bad status %#x\n",
+ le16_to_cpu(conf->hdr.status));
+ return EFC_FAIL;
+ }
+
+ sli4->params.has_extents =
+ le32_to_cpu(conf->ext_dword) & SLI4_READ_CFG_RESP_RESOURCE_EXT;
+ if (sli4->params.has_extents) {
+ efc_log_err(sli4, "extents not supported\n");
+ return EFC_FAIL;
+ }
+
+ base = sli4->ext[0].base;
+ if (!base) {
+ int size = SLI4_RSRC_MAX * sizeof(u32);
+
+ base = kzalloc(size, GFP_KERNEL);
+ if (!base)
+ return EFC_FAIL;
+ }
+
+ for (i = 0; i < SLI4_RSRC_MAX; i++) {
+ sli4->ext[i].number = 1;
+ sli4->ext[i].n_alloc = 0;
+ sli4->ext[i].base = &base[i];
+ }
+
+ sli4->ext[SLI4_RSRC_VFI].base[0] = le16_to_cpu(conf->vfi_base);
+ sli4->ext[SLI4_RSRC_VFI].size = le16_to_cpu(conf->vfi_count);
+
+ sli4->ext[SLI4_RSRC_VPI].base[0] = le16_to_cpu(conf->vpi_base);
+ sli4->ext[SLI4_RSRC_VPI].size = le16_to_cpu(conf->vpi_count);
+
+ sli4->ext[SLI4_RSRC_RPI].base[0] = le16_to_cpu(conf->rpi_base);
+ sli4->ext[SLI4_RSRC_RPI].size = le16_to_cpu(conf->rpi_count);
+
+ sli4->ext[SLI4_RSRC_XRI].base[0] = le16_to_cpu(conf->xri_base);
+ sli4->ext[SLI4_RSRC_XRI].size = le16_to_cpu(conf->xri_count);
+
+ sli4->ext[SLI4_RSRC_FCFI].base[0] = 0;
+ sli4->ext[SLI4_RSRC_FCFI].size = le16_to_cpu(conf->fcfi_count);
+
+ for (i = 0; i < SLI4_RSRC_MAX; i++) {
+ total = sli4->ext[i].number * sli4->ext[i].size;
+ total_size = BITS_TO_LONGS(total) * sizeof(long);
+ sli4->ext[i].use_map = kzalloc(total_size, GFP_KERNEL);
+ if (!sli4->ext[i].use_map) {
+ efc_log_err(sli4, "bitmap memory allocation failed %d\n",
+ i);
+ return EFC_FAIL;
+ }
+ sli4->ext[i].map_size = total;
+ }
+
+ sli4->topology = (le32_to_cpu(conf->topology_dword) &
+ SLI4_READ_CFG_RESP_TOPOLOGY) >> 24;
+ switch (sli4->topology) {
+ case SLI4_READ_CFG_TOPO_FC:
+ efc_log_info(sli4, "FC (unknown)\n");
+ break;
+ case SLI4_READ_CFG_TOPO_NON_FC_AL:
+ efc_log_info(sli4, "FC (direct attach)\n");
+ break;
+ case SLI4_READ_CFG_TOPO_FC_AL:
+ efc_log_info(sli4, "FC (arbitrated loop)\n");
+ break;
+ default:
+ efc_log_info(sli4, "bad topology %#x\n",
+ sli4->topology);
+ }
+
+ sli4->e_d_tov = le16_to_cpu(conf->e_d_tov);
+ sli4->r_a_tov = le16_to_cpu(conf->r_a_tov);
+
+ sli4->link_module_type = le16_to_cpu(conf->lmt);
+
+ sli4->qinfo.max_qcount[SLI4_QTYPE_EQ] = le16_to_cpu(conf->eq_count);
+ sli4->qinfo.max_qcount[SLI4_QTYPE_CQ] = le16_to_cpu(conf->cq_count);
+ sli4->qinfo.max_qcount[SLI4_QTYPE_WQ] = le16_to_cpu(conf->wq_count);
+ sli4->qinfo.max_qcount[SLI4_QTYPE_RQ] = le16_to_cpu(conf->rq_count);
+
+ /*
+ * READ_CONFIG doesn't give the max number of MQ. Applications
+ * will typically want 1, but we may need another at some future
+ * date. Dummy up a "max" MQ count here.
+ */
+ sli4->qinfo.max_qcount[SLI4_QTYPE_MQ] = SLI4_USER_MQ_COUNT;
+ return EFC_SUCCESS;
+}
+
+static int
+sli_get_sli4_parameters(struct sli4 *sli4)
+{
+ struct sli4_rsp_cmn_get_sli4_params *parms;
+ u32 dw_loopback;
+ u32 dw_eq_pg_cnt;
+ u32 dw_cq_pg_cnt;
+ u32 dw_mq_pg_cnt;
+ u32 dw_wq_pg_cnt;
+ u32 dw_rq_pg_cnt;
+ u32 dw_sgl_pg_cnt;
+
+ if (sli_cmd_common_get_sli4_parameters(sli4, sli4->bmbx.virt))
+ return EFC_FAIL;
+
+ parms = (struct sli4_rsp_cmn_get_sli4_params *)
+ (((u8 *)sli4->bmbx.virt) +
+ offsetof(struct sli4_cmd_sli_config, payload.embed));
+
+ if (sli_bmbx_command(sli4)) {
+ efc_log_crit(sli4, "%s: bootstrap mailbox write fail\n",
+ __func__);
+ return EFC_FAIL;
+ }
+
+ if (parms->hdr.status) {
+ efc_log_err(sli4, "COMMON_GET_SLI4_PARAMETERS bad status %#x",
+ parms->hdr.status);
+ efc_log_err(sli4, "additional status %#x\n",
+ parms->hdr.additional_status);
+ return EFC_FAIL;
+ }
+
+ dw_loopback = le32_to_cpu(parms->dw16_loopback_scope);
+ dw_eq_pg_cnt = le32_to_cpu(parms->dw6_eq_page_cnt);
+ dw_cq_pg_cnt = le32_to_cpu(parms->dw8_cq_page_cnt);
+ dw_mq_pg_cnt = le32_to_cpu(parms->dw10_mq_page_cnt);
+ dw_wq_pg_cnt = le32_to_cpu(parms->dw12_wq_page_cnt);
+ dw_rq_pg_cnt = le32_to_cpu(parms->dw14_rq_page_cnt);
+
+ sli4->params.auto_reg = (dw_loopback & SLI4_PARAM_AREG);
+ sli4->params.auto_xfer_rdy = (dw_loopback & SLI4_PARAM_AGXF);
+ sli4->params.hdr_template_req = (dw_loopback & SLI4_PARAM_HDRR);
+ sli4->params.t10_dif_inline_capable = (dw_loopback & SLI4_PARAM_TIMM);
+ sli4->params.t10_dif_separate_capable = (dw_loopback & SLI4_PARAM_TSMM);
+
+ sli4->params.mq_create_version = GET_Q_CREATE_VERSION(dw_mq_pg_cnt);
+ sli4->params.cq_create_version = GET_Q_CREATE_VERSION(dw_cq_pg_cnt);
+
+ sli4->rq_min_buf_size = le16_to_cpu(parms->min_rq_buffer_size);
+ sli4->rq_max_buf_size = le32_to_cpu(parms->max_rq_buffer_size);
+
+ sli4->qinfo.qpage_count[SLI4_QTYPE_EQ] =
+ (dw_eq_pg_cnt & SLI4_PARAM_EQ_PAGE_CNT_MASK);
+ sli4->qinfo.qpage_count[SLI4_QTYPE_CQ] =
+ (dw_cq_pg_cnt & SLI4_PARAM_CQ_PAGE_CNT_MASK);
+ sli4->qinfo.qpage_count[SLI4_QTYPE_MQ] =
+ (dw_mq_pg_cnt & SLI4_PARAM_MQ_PAGE_CNT_MASK);
+ sli4->qinfo.qpage_count[SLI4_QTYPE_WQ] =
+ (dw_wq_pg_cnt & SLI4_PARAM_WQ_PAGE_CNT_MASK);
+ sli4->qinfo.qpage_count[SLI4_QTYPE_RQ] =
+ (dw_rq_pg_cnt & SLI4_PARAM_RQ_PAGE_CNT_MASK);
+
+ /* save count methods and masks for each queue type */
+
+ sli4->qinfo.count_mask[SLI4_QTYPE_EQ] =
+ le16_to_cpu(parms->eqe_count_mask);
+ sli4->qinfo.count_method[SLI4_QTYPE_EQ] =
+ GET_Q_CNT_METHOD(dw_eq_pg_cnt);
+
+ sli4->qinfo.count_mask[SLI4_QTYPE_CQ] =
+ le16_to_cpu(parms->cqe_count_mask);
+ sli4->qinfo.count_method[SLI4_QTYPE_CQ] =
+ GET_Q_CNT_METHOD(dw_cq_pg_cnt);
+
+ sli4->qinfo.count_mask[SLI4_QTYPE_MQ] =
+ le16_to_cpu(parms->mqe_count_mask);
+ sli4->qinfo.count_method[SLI4_QTYPE_MQ] =
+ GET_Q_CNT_METHOD(dw_mq_pg_cnt);
+
+ sli4->qinfo.count_mask[SLI4_QTYPE_WQ] =
+ le16_to_cpu(parms->wqe_count_mask);
+ sli4->qinfo.count_method[SLI4_QTYPE_WQ] =
+ GET_Q_CNT_METHOD(dw_wq_pg_cnt);
+
+ sli4->qinfo.count_mask[SLI4_QTYPE_RQ] =
+ le16_to_cpu(parms->rqe_count_mask);
+ sli4->qinfo.count_method[SLI4_QTYPE_RQ] =
+ GET_Q_CNT_METHOD(dw_rq_pg_cnt);
+
+ /* now calculate max queue entries */
+ sli_calc_max_qentries(sli4);
+
+ dw_sgl_pg_cnt = le32_to_cpu(parms->dw18_sgl_page_cnt);
+
+ /* max # of pages */
+ sli4->max_sgl_pages = (dw_sgl_pg_cnt & SLI4_PARAM_SGL_PAGE_CNT_MASK);
+
+ /* bit map of available sizes */
+ sli4->sgl_page_sizes = (dw_sgl_pg_cnt &
+ SLI4_PARAM_SGL_PAGE_SZS_MASK) >> 8;
+ /* ignore HLM here. Use value from REQUEST_FEATURES */
+ sli4->sge_supported_length = le32_to_cpu(parms->sge_supported_length);
+ sli4->params.sgl_pre_reg_required = (dw_loopback & SLI4_PARAM_SGLR);
+ /* default to using pre-registered SGL's */
+ sli4->params.sgl_pre_registered = true;
+
+ sli4->params.perf_hint = dw_loopback & SLI4_PARAM_PHON;
+ sli4->params.perf_wq_id_association = (dw_loopback & SLI4_PARAM_PHWQ);
+
+ sli4->rq_batch = (le16_to_cpu(parms->dw15w1_rq_db_window) &
+ SLI4_PARAM_RQ_DB_WINDOW_MASK) >> 12;
+
+ /* Use the highest available WQE size. */
+ if (((dw_wq_pg_cnt & SLI4_PARAM_WQE_SZS_MASK) >> 8) &
+ SLI4_128BYTE_WQE_SUPPORT)
+ sli4->wqe_size = SLI4_WQE_EXT_BYTES;
+ else
+ sli4->wqe_size = SLI4_WQE_BYTES;
+
+ return EFC_SUCCESS;
+}
+
+static int
+sli_get_ctrl_attributes(struct sli4 *sli4)
+{
+ struct sli4_rsp_cmn_get_cntl_attributes *attr;
+ struct sli4_rsp_cmn_get_cntl_addl_attributes *add_attr;
+ struct efc_dma data;
+ u32 psize;
+
+ /*
+ * Issue COMMON_GET_CNTL_ATTRIBUTES to get port_number. Temporarily
+ * uses VPD DMA buffer as the response won't fit in the embedded
+ * buffer.
+ */
+ memset(sli4->vpd_data.virt, 0, sli4->vpd_data.size);
+ if (sli_cmd_common_get_cntl_attributes(sli4, sli4->bmbx.virt,
+ &sli4->vpd_data)) {
+ efc_log_err(sli4, "bad COMMON_GET_CNTL_ATTRIBUTES write\n");
+ return EFC_FAIL;
+ }
+
+ attr = sli4->vpd_data.virt;
+
+ if (sli_bmbx_command(sli4)) {
+ efc_log_crit(sli4, "%s: bootstrap mailbox write fail\n",
+ __func__);
+ return EFC_FAIL;
+ }
+
+ if (attr->hdr.status) {
+ efc_log_err(sli4, "COMMON_GET_CNTL_ATTRIBUTES bad status %#x",
+ attr->hdr.status);
+ efc_log_err(sli4, "additional status %#x\n",
+ attr->hdr.additional_status);
+ return EFC_FAIL;
+ }
+
+ sli4->port_number = attr->port_num_type_flags & SLI4_CNTL_ATTR_PORTNUM;
+
+ memcpy(sli4->bios_version_string, attr->bios_version_str,
+ sizeof(sli4->bios_version_string));
+
+ /* get additional attributes */
+ psize = sizeof(struct sli4_rsp_cmn_get_cntl_addl_attributes);
+ data.size = psize;
+ data.virt = dma_alloc_coherent(&sli4->pci->dev, data.size,
+ &data.phys, GFP_DMA);
+ if (!data.virt) {
+ memset(&data, 0, sizeof(struct efc_dma));
+ efc_log_err(sli4, "Failed to allocate memory for GET_CNTL_ADDL_ATTR\n");
+ return EFC_FAIL;
+ }
+
+ if (sli_cmd_common_get_cntl_addl_attributes(sli4, sli4->bmbx.virt,
+ &data)) {
+ efc_log_err(sli4, "bad GET_CNTL_ADDL_ATTR write\n");
+ dma_free_coherent(&sli4->pci->dev, data.size,
+ data.virt, data.phys);
+ return EFC_FAIL;
+ }
+
+ if (sli_bmbx_command(sli4)) {
+ efc_log_crit(sli4, "mailbox fail (GET_CNTL_ADDL_ATTR)\n");
+ dma_free_coherent(&sli4->pci->dev, data.size,
+ data.virt, data.phys);
+ return EFC_FAIL;
+ }
+
+ add_attr = data.virt;
+ if (add_attr->hdr.status) {
+ efc_log_err(sli4, "GET_CNTL_ADDL_ATTR bad status %#x\n",
+ add_attr->hdr.status);
+ dma_free_coherent(&sli4->pci->dev, data.size,
+ data.virt, data.phys);
+ return EFC_FAIL;
+ }
+
+ memcpy(sli4->ipl_name, add_attr->ipl_file_name, sizeof(sli4->ipl_name));
+
+ efc_log_info(sli4, "IPL:%s\n", (char *)sli4->ipl_name);
+
+ dma_free_coherent(&sli4->pci->dev, data.size, data.virt,
+ data.phys);
+ memset(&data, 0, sizeof(struct efc_dma));
+ return EFC_SUCCESS;
+}
+
+static int
+sli_get_fw_rev(struct sli4 *sli4)
+{
+ struct sli4_cmd_read_rev *read_rev = sli4->bmbx.virt;
+
+ if (sli_cmd_read_rev(sli4, sli4->bmbx.virt, &sli4->vpd_data))
+ return EFC_FAIL;
+
+ if (sli_bmbx_command(sli4)) {
+ efc_log_crit(sli4, "bootstrap mailbox write fail (READ_REV)\n");
+ return EFC_FAIL;
+ }
+
+ if (le16_to_cpu(read_rev->hdr.status)) {
+ efc_log_err(sli4, "READ_REV bad status %#x\n",
+ le16_to_cpu(read_rev->hdr.status));
+ return EFC_FAIL;
+ }
+
+ sli4->fw_rev[0] = le32_to_cpu(read_rev->first_fw_id);
+ memcpy(sli4->fw_name[0], read_rev->first_fw_name,
+ sizeof(sli4->fw_name[0]));
+
+ sli4->fw_rev[1] = le32_to_cpu(read_rev->second_fw_id);
+ memcpy(sli4->fw_name[1], read_rev->second_fw_name,
+ sizeof(sli4->fw_name[1]));
+
+ sli4->hw_rev[0] = le32_to_cpu(read_rev->first_hw_rev);
+ sli4->hw_rev[1] = le32_to_cpu(read_rev->second_hw_rev);
+ sli4->hw_rev[2] = le32_to_cpu(read_rev->third_hw_rev);
+
+ efc_log_info(sli4, "FW1:%s (%08x) / FW2:%s (%08x)\n",
+ read_rev->first_fw_name, le32_to_cpu(read_rev->first_fw_id),
+ read_rev->second_fw_name, le32_to_cpu(read_rev->second_fw_id));
+
+ efc_log_info(sli4, "HW1: %08x / HW2: %08x\n",
+ le32_to_cpu(read_rev->first_hw_rev),
+ le32_to_cpu(read_rev->second_hw_rev));
+
+ /* Check that all VPD data was returned */
+ if (le32_to_cpu(read_rev->returned_vpd_length) !=
+ le32_to_cpu(read_rev->actual_vpd_length)) {
+ efc_log_info(sli4, "VPD length: avail=%d return=%d actual=%d\n",
+ le32_to_cpu(read_rev->available_length_dword) &
+ SLI4_READ_REV_AVAILABLE_LENGTH,
+ le32_to_cpu(read_rev->returned_vpd_length),
+ le32_to_cpu(read_rev->actual_vpd_length));
+ }
+ sli4->vpd_length = le32_to_cpu(read_rev->returned_vpd_length);
+ return EFC_SUCCESS;
+}
+
+static int
+sli_get_config(struct sli4 *sli4)
+{
+ struct sli4_rsp_cmn_get_port_name *port_name;
+ struct sli4_cmd_read_nvparms *read_nvparms;
+
+ /*
+ * Read the device configuration
+ */
+ if (sli_get_read_config(sli4))
+ return EFC_FAIL;
+
+ if (sli_get_sli4_parameters(sli4))
+ return EFC_FAIL;
+
+ if (sli_get_ctrl_attributes(sli4))
+ return EFC_FAIL;
+
+ if (sli_cmd_common_get_port_name(sli4, sli4->bmbx.virt))
+ return EFC_FAIL;
+
+ port_name = (struct sli4_rsp_cmn_get_port_name *)
+ (((u8 *)sli4->bmbx.virt) +
+ offsetof(struct sli4_cmd_sli_config, payload.embed));
+
+ if (sli_bmbx_command(sli4)) {
+ efc_log_crit(sli4, "bootstrap mailbox fail (GET_PORT_NAME)\n");
+ return EFC_FAIL;
+ }
+
+ sli4->port_name[0] = port_name->port_name[sli4->port_number];
+ sli4->port_name[1] = '\0';
+
+ if (sli_get_fw_rev(sli4))
+ return EFC_FAIL;
+
+ if (sli_cmd_read_nvparms(sli4, sli4->bmbx.virt)) {
+ efc_log_err(sli4, "bad READ_NVPARMS write\n");
+ return EFC_FAIL;
+ }
+
+ if (sli_bmbx_command(sli4)) {
+ efc_log_crit(sli4, "bootstrap mailbox fail (READ_NVPARMS)\n");
+ return EFC_FAIL;
+ }
+
+ read_nvparms = sli4->bmbx.virt;
+ if (le16_to_cpu(read_nvparms->hdr.status)) {
+ efc_log_err(sli4, "READ_NVPARMS bad status %#x\n",
+ le16_to_cpu(read_nvparms->hdr.status));
+ return EFC_FAIL;
+ }
+
+ memcpy(sli4->wwpn, read_nvparms->wwpn, sizeof(sli4->wwpn));
+ memcpy(sli4->wwnn, read_nvparms->wwnn, sizeof(sli4->wwnn));
+
+ efc_log_info(sli4, "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ sli4->wwpn[0], sli4->wwpn[1], sli4->wwpn[2], sli4->wwpn[3],
+ sli4->wwpn[4], sli4->wwpn[5], sli4->wwpn[6], sli4->wwpn[7]);
+ efc_log_info(sli4, "WWNN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ sli4->wwnn[0], sli4->wwnn[1], sli4->wwnn[2], sli4->wwnn[3],
+ sli4->wwnn[4], sli4->wwnn[5], sli4->wwnn[6], sli4->wwnn[7]);
+
+ return EFC_SUCCESS;
+}
+
+int
+sli_setup(struct sli4 *sli4, void *os, struct pci_dev *pdev,
+ void __iomem *reg[])
+{
+ u32 intf = U32_MAX;
+ u32 pci_class_rev = 0;
+ u32 rev_id = 0;
+ u32 family = 0;
+ u32 asic_id = 0;
+ u32 i;
+ struct sli4_asic_entry_t *asic;
+
+ memset(sli4, 0, sizeof(struct sli4));
+
+ sli4->os = os;
+ sli4->pci = pdev;
+
+ for (i = 0; i < 6; i++)
+ sli4->reg[i] = reg[i];
+ /*
+ * Read the SLI_INTF register to discover the register layout
+ * and other capability information
+ */
+ if (pci_read_config_dword(pdev, SLI4_INTF_REG, &intf))
+ return EFC_FAIL;
+
+ if ((intf & SLI4_INTF_VALID_MASK) != (u32)SLI4_INTF_VALID_VALUE) {
+ efc_log_err(sli4, "SLI_INTF is not valid\n");
+ return EFC_FAIL;
+ }
+
+ /* driver only support SLI-4 */
+ if ((intf & SLI4_INTF_REV_MASK) != SLI4_INTF_REV_S4) {
+ efc_log_err(sli4, "Unsupported SLI revision (intf=%#x)\n",
+ intf);
+ return EFC_FAIL;
+ }
+
+ sli4->sli_family = intf & SLI4_INTF_FAMILY_MASK;
+
+ sli4->if_type = intf & SLI4_INTF_IF_TYPE_MASK;
+ efc_log_info(sli4, "status=%#x error1=%#x error2=%#x\n",
+ sli_reg_read_status(sli4),
+ sli_reg_read_err1(sli4),
+ sli_reg_read_err2(sli4));
+
+ /*
+ * set the ASIC type and revision
+ */
+ if (pci_read_config_dword(pdev, PCI_CLASS_REVISION, &pci_class_rev))
+ return EFC_FAIL;
+
+ rev_id = pci_class_rev & 0xff;
+ family = sli4->sli_family;
+ if (family == SLI4_FAMILY_CHECK_ASIC_TYPE) {
+ if (!pci_read_config_dword(pdev, SLI4_ASIC_ID_REG, &asic_id))
+ family = asic_id & SLI4_ASIC_GEN_MASK;
+ }
+
+ for (i = 0, asic = sli4_asic_table; i < ARRAY_SIZE(sli4_asic_table);
+ i++, asic++) {
+ if (rev_id == asic->rev_id && family == asic->family) {
+ sli4->asic_type = family;
+ sli4->asic_rev = rev_id;
+ break;
+ }
+ }
+ /* Fail if no matching asic type/rev was found */
+ if (!sli4->asic_type || !sli4->asic_rev) {
+ efc_log_err(sli4, "no matching asic family/rev found: %02x/%02x\n",
+ family, rev_id);
+ return EFC_FAIL;
+ }
+
+ /*
+ * The bootstrap mailbox is equivalent to a MQ with a single 256 byte
+ * entry, a CQ with a single 16 byte entry, and no event queue.
+ * Alignment must be 16 bytes as the low order address bits in the
+ * address register are also control / status.
+ */
+ sli4->bmbx.size = SLI4_BMBX_SIZE + sizeof(struct sli4_mcqe);
+ sli4->bmbx.virt = dma_alloc_coherent(&pdev->dev, sli4->bmbx.size,
+ &sli4->bmbx.phys, GFP_DMA);
+ if (!sli4->bmbx.virt) {
+ memset(&sli4->bmbx, 0, sizeof(struct efc_dma));
+ efc_log_err(sli4, "bootstrap mailbox allocation failed\n");
+ return EFC_FAIL;
+ }
+
+ if (sli4->bmbx.phys & SLI4_BMBX_MASK_LO) {
+ efc_log_err(sli4, "bad alignment for bootstrap mailbox\n");
+ return EFC_FAIL;
+ }
+
+ efc_log_info(sli4, "bmbx v=%p p=0x%x %08x s=%zd\n", sli4->bmbx.virt,
+ upper_32_bits(sli4->bmbx.phys),
+ lower_32_bits(sli4->bmbx.phys), sli4->bmbx.size);
+
+ /* 4096 is arbitrary. What should this value actually be? */
+ sli4->vpd_data.size = 4096;
+ sli4->vpd_data.virt = dma_alloc_coherent(&pdev->dev,
+ sli4->vpd_data.size,
+ &sli4->vpd_data.phys,
+ GFP_DMA);
+ if (!sli4->vpd_data.virt) {
+ memset(&sli4->vpd_data, 0, sizeof(struct efc_dma));
+ /* Note that failure isn't fatal in this specific case */
+ efc_log_info(sli4, "VPD buffer allocation failed\n");
+ }
+
+ if (!sli_fw_init(sli4)) {
+ efc_log_err(sli4, "FW initialization failed\n");
+ return EFC_FAIL;
+ }
+
+ /*
+ * Set one of fcpi(initiator), fcpt(target), fcpc(combined) to true
+ * in addition to any other desired features
+ */
+ sli4->features = (SLI4_REQFEAT_IAAB | SLI4_REQFEAT_NPIV |
+ SLI4_REQFEAT_DIF | SLI4_REQFEAT_VF |
+ SLI4_REQFEAT_FCPC | SLI4_REQFEAT_IAAR |
+ SLI4_REQFEAT_HLM | SLI4_REQFEAT_PERFH |
+ SLI4_REQFEAT_RXSEQ | SLI4_REQFEAT_RXRI |
+ SLI4_REQFEAT_MRQP);
+
+ /* use performance hints if available */
+ if (sli4->params.perf_hint)
+ sli4->features |= SLI4_REQFEAT_PERFH;
+
+ if (sli_request_features(sli4, &sli4->features, true))
+ return EFC_FAIL;
+
+ if (sli_get_config(sli4))
+ return EFC_FAIL;
+
+ return EFC_SUCCESS;
+}
+
+int
+sli_init(struct sli4 *sli4)
+{
+ if (sli4->params.has_extents) {
+ efc_log_info(sli4, "extend allocation not supported\n");
+ return EFC_FAIL;
+ }
+
+ sli4->features &= (~SLI4_REQFEAT_HLM);
+ sli4->features &= (~SLI4_REQFEAT_RXSEQ);
+ sli4->features &= (~SLI4_REQFEAT_RXRI);
+
+ if (sli_request_features(sli4, &sli4->features, false))
+ return EFC_FAIL;
+
+ return EFC_SUCCESS;
+}
+
+int
+sli_reset(struct sli4 *sli4)
+{
+ u32 i;
+
+ if (!sli_fw_init(sli4)) {
+ efc_log_crit(sli4, "FW initialization failed\n");
+ return EFC_FAIL;
+ }
+
+ kfree(sli4->ext[0].base);
+ sli4->ext[0].base = NULL;
+
+ for (i = 0; i < SLI4_RSRC_MAX; i++) {
+ kfree(sli4->ext[i].use_map);
+ sli4->ext[i].use_map = NULL;
+ sli4->ext[i].base = NULL;
+ }
+
+ return sli_get_config(sli4);
+}
+
+int
+sli_fw_reset(struct sli4 *sli4)
+{
+ /*
+ * Firmware must be ready before issuing the reset.
+ */
+ if (!sli_wait_for_fw_ready(sli4, SLI4_FW_READY_TIMEOUT_MSEC)) {
+ efc_log_crit(sli4, "FW status is NOT ready\n");
+ return EFC_FAIL;
+ }
+
+ /* Lancer uses PHYDEV_CONTROL */
+ writel(SLI4_PHYDEV_CTRL_FRST, (sli4->reg[0] + SLI4_PHYDEV_CTRL_REG));
+
+ /* wait for the FW to become ready after the reset */
+ if (!sli_wait_for_fw_ready(sli4, SLI4_FW_READY_TIMEOUT_MSEC)) {
+ efc_log_crit(sli4, "Failed to be ready after firmware reset\n");
+ return EFC_FAIL;
+ }
+ return EFC_SUCCESS;
+}
+
+void
+sli_teardown(struct sli4 *sli4)
+{
+ u32 i;
+
+ kfree(sli4->ext[0].base);
+ sli4->ext[0].base = NULL;
+
+ for (i = 0; i < SLI4_RSRC_MAX; i++) {
+ sli4->ext[i].base = NULL;
+
+ kfree(sli4->ext[i].use_map);
+ sli4->ext[i].use_map = NULL;
+ }
+
+ if (!sli_sliport_reset(sli4))
+ efc_log_err(sli4, "FW deinitialization failed\n");
+
+ dma_free_coherent(&sli4->pci->dev, sli4->vpd_data.size,
+ sli4->vpd_data.virt, sli4->vpd_data.phys);
+ memset(&sli4->vpd_data, 0, sizeof(struct efc_dma));
+
+ dma_free_coherent(&sli4->pci->dev, sli4->bmbx.size,
+ sli4->bmbx.virt, sli4->bmbx.phys);
+ memset(&sli4->bmbx, 0, sizeof(struct efc_dma));
+}
+
+int
+sli_callback(struct sli4 *sli4, enum sli4_callback which,
+ void *func, void *arg)
+{
+ if (!func) {
+ efc_log_err(sli4, "bad parameter sli4=%p which=%#x func=%p\n",
+ sli4, which, func);
+ return EFC_FAIL;
+ }
+
+ switch (which) {
+ case SLI4_CB_LINK:
+ sli4->link = func;
+ sli4->link_arg = arg;
+ break;
+ default:
+ efc_log_info(sli4, "unknown callback %#x\n", which);
+ return EFC_FAIL;
+ }
+
+ return EFC_SUCCESS;
+}
+
+int
+sli_eq_modify_delay(struct sli4 *sli4, struct sli4_queue *eq,
+ u32 num_eq, u32 shift, u32 delay_mult)
+{
+ sli_cmd_common_modify_eq_delay(sli4, sli4->bmbx.virt, eq, num_eq,
+ shift, delay_mult);
+
+ if (sli_bmbx_command(sli4)) {
+ efc_log_crit(sli4, "bootstrap mailbox write fail (MODIFY EQ DELAY)\n");
+ return EFC_FAIL;
+ }
+ if (sli_res_sli_config(sli4, sli4->bmbx.virt)) {
+ efc_log_err(sli4, "bad status MODIFY EQ DELAY\n");
+ return EFC_FAIL;
+ }
+
+ return EFC_SUCCESS;
+}
+
+int
+sli_resource_alloc(struct sli4 *sli4, enum sli4_resource rtype,
+ u32 *rid, u32 *index)
+{
+ int rc = EFC_SUCCESS;
+ u32 size;
+ u32 ext_idx;
+ u32 item_idx;
+ u32 position;
+
+ *rid = U32_MAX;
+ *index = U32_MAX;
+
+ switch (rtype) {
+ case SLI4_RSRC_VFI:
+ case SLI4_RSRC_VPI:
+ case SLI4_RSRC_RPI:
+ case SLI4_RSRC_XRI:
+ position =
+ find_first_zero_bit(sli4->ext[rtype].use_map,
+ sli4->ext[rtype].map_size);
+ if (position >= sli4->ext[rtype].map_size) {
+ efc_log_err(sli4, "out of resource %d (alloc=%d)\n",
+ rtype, sli4->ext[rtype].n_alloc);
+ rc = EFC_FAIL;
+ break;
+ }
+ set_bit(position, sli4->ext[rtype].use_map);
+ *index = position;
+
+ size = sli4->ext[rtype].size;
+
+ ext_idx = *index / size;
+ item_idx = *index % size;
+
+ *rid = sli4->ext[rtype].base[ext_idx] + item_idx;
+
+ sli4->ext[rtype].n_alloc++;
+ break;
+ default:
+ rc = EFC_FAIL;
+ }
+
+ return rc;
+}
+
+int
+sli_resource_free(struct sli4 *sli4, enum sli4_resource rtype, u32 rid)
+{
+ int rc = EFC_FAIL;
+ u32 x;
+ u32 size, *base;
+
+ switch (rtype) {
+ case SLI4_RSRC_VFI:
+ case SLI4_RSRC_VPI:
+ case SLI4_RSRC_RPI:
+ case SLI4_RSRC_XRI:
+ /*
+ * Figure out which extent contains the resource ID. I.e. find
+ * the extent such that
+ * extent->base <= resource ID < extent->base + extent->size
+ */
+ base = sli4->ext[rtype].base;
+ size = sli4->ext[rtype].size;
+
+ /*
+ * In the case of FW reset, this may be cleared
+ * but the force_free path will still attempt to
+ * free the resource. Prevent a NULL pointer access.
+ */
+ if (!base)
+ break;
+
+ for (x = 0; x < sli4->ext[rtype].number; x++) {
+ if ((rid < base[x] || (rid >= (base[x] + size))))
+ continue;
+
+ rid -= base[x];
+ clear_bit((x * size) + rid, sli4->ext[rtype].use_map);
+ rc = EFC_SUCCESS;
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return rc;
+}
+
+int
+sli_resource_reset(struct sli4 *sli4, enum sli4_resource rtype)
+{
+ int rc = EFC_FAIL;
+ u32 i;
+
+ switch (rtype) {
+ case SLI4_RSRC_VFI:
+ case SLI4_RSRC_VPI:
+ case SLI4_RSRC_RPI:
+ case SLI4_RSRC_XRI:
+ for (i = 0; i < sli4->ext[rtype].map_size; i++)
+ clear_bit(i, sli4->ext[rtype].use_map);
+ rc = EFC_SUCCESS;
+ break;
+ default:
+ break;
+ }
+
+ return rc;
+}
+
+int sli_raise_ue(struct sli4 *sli4, u8 dump)
+{
+ u32 val = 0;
+
+ if (dump == SLI4_FUNC_DESC_DUMP) {
+ val = SLI4_PORT_CTRL_FDD | SLI4_PORT_CTRL_IP;
+ writel(val, (sli4->reg[0] + SLI4_PORT_CTRL_REG));
+ } else {
+ val = SLI4_PHYDEV_CTRL_FRST;
+
+ if (dump == SLI4_CHIP_LEVEL_DUMP)
+ val |= SLI4_PHYDEV_CTRL_DD;
+ writel(val, (sli4->reg[0] + SLI4_PHYDEV_CTRL_REG));
+ }
+
+ return EFC_SUCCESS;
+}
+
+int sli_dump_is_ready(struct sli4 *sli4)
+{
+ int rc = SLI4_DUMP_READY_STATUS_NOT_READY;
+ u32 port_val;
+ u32 bmbx_val;
+
+ /*
+ * Ensure that the port is ready AND the mailbox is
+ * ready before signaling that the dump is ready to go.
+ */
+ port_val = sli_reg_read_status(sli4);
+ bmbx_val = readl(sli4->reg[0] + SLI4_BMBX_REG);
+
+ if ((bmbx_val & SLI4_BMBX_RDY) &&
+ (port_val & SLI4_PORT_STATUS_RDY)) {
+ if (port_val & SLI4_PORT_STATUS_DIP)
+ rc = SLI4_DUMP_READY_STATUS_DD_PRESENT;
+ else if (port_val & SLI4_PORT_STATUS_FDP)
+ rc = SLI4_DUMP_READY_STATUS_FDB_PRESENT;
+ }
+
+ return rc;
+}
+
+bool sli_reset_required(struct sli4 *sli4)
+{
+ u32 val;
+
+ val = sli_reg_read_status(sli4);
+ return (val & SLI4_PORT_STATUS_RN);
+}
+
+int
+sli_cmd_post_sgl_pages(struct sli4 *sli4, void *buf, u16 xri,
+ u32 xri_count, struct efc_dma *page0[],
+ struct efc_dma *page1[], struct efc_dma *dma)
+{
+ struct sli4_rqst_post_sgl_pages *post = NULL;
+ u32 i;
+ __le32 req_len;
+
+ post = sli_config_cmd_init(sli4, buf,
+ SLI4_CFG_PYLD_LENGTH(post_sgl_pages), dma);
+ if (!post)
+ return EFC_FAIL;
+
+ /* payload size calculation */
+ /* 4 = xri_start + xri_count */
+ /* xri_count = # of XRI's registered */
+ /* sizeof(uint64_t) = physical address size */
+ /* 2 = # of physical addresses per page set */
+ req_len = cpu_to_le32(4 + (xri_count * (sizeof(uint64_t) * 2)));
+ sli_cmd_fill_hdr(&post->hdr, SLI4_OPC_POST_SGL_PAGES, SLI4_SUBSYSTEM_FC,
+ CMD_V0, req_len);
+ post->xri_start = cpu_to_le16(xri);
+ post->xri_count = cpu_to_le16(xri_count);
+
+ for (i = 0; i < xri_count; i++) {
+ post->page_set[i].page0_low =
+ cpu_to_le32(lower_32_bits(page0[i]->phys));
+ post->page_set[i].page0_high =
+ cpu_to_le32(upper_32_bits(page0[i]->phys));
+ }
+
+ if (page1) {
+ for (i = 0; i < xri_count; i++) {
+ post->page_set[i].page1_low =
+ cpu_to_le32(lower_32_bits(page1[i]->phys));
+ post->page_set[i].page1_high =
+ cpu_to_le32(upper_32_bits(page1[i]->phys));
+ }
+ }
+
+ return EFC_SUCCESS;
+}
+
+int
+sli_cmd_post_hdr_templates(struct sli4 *sli4, void *buf, struct efc_dma *dma,
+ u16 rpi, struct efc_dma *payload_dma)
+{
+ struct sli4_rqst_post_hdr_templates *req = NULL;
+ uintptr_t phys = 0;
+ u32 i = 0;
+ u32 page_count, payload_size;
+
+ page_count = sli_page_count(dma->size, SLI_PAGE_SIZE);
+
+ payload_size = ((sizeof(struct sli4_rqst_post_hdr_templates) +
+ (page_count * SZ_DMAADDR)) - sizeof(struct sli4_rqst_hdr));
+
+ if (page_count > 16) {
+ /*
+ * We can't fit more than 16 descriptors into an embedded mbox
+ * command, it has to be non-embedded
+ */
+ payload_dma->size = payload_size;
+ payload_dma->virt = dma_alloc_coherent(&sli4->pci->dev,
+ payload_dma->size,
+ &payload_dma->phys, GFP_DMA);
+ if (!payload_dma->virt) {
+ memset(payload_dma, 0, sizeof(struct efc_dma));
+ efc_log_err(sli4, "mbox payload memory allocation fail\n");
+ return EFC_FAIL;
+ }
+ req = sli_config_cmd_init(sli4, buf, payload_size, payload_dma);
+ } else {
+ req = sli_config_cmd_init(sli4, buf, payload_size, NULL);
+ }
+
+ if (!req)
+ return EFC_FAIL;
+
+ if (rpi == U16_MAX)
+ rpi = sli4->ext[SLI4_RSRC_RPI].base[0];
+
+ sli_cmd_fill_hdr(&req->hdr, SLI4_OPC_POST_HDR_TEMPLATES,
+ SLI4_SUBSYSTEM_FC, CMD_V0,
+ SLI4_RQST_PYLD_LEN(post_hdr_templates));
+
+ req->rpi_offset = cpu_to_le16(rpi);
+ req->page_count = cpu_to_le16(page_count);
+ phys = dma->phys;
+ for (i = 0; i < page_count; i++) {
+ req->page_descriptor[i].low = cpu_to_le32(lower_32_bits(phys));
+ req->page_descriptor[i].high = cpu_to_le32(upper_32_bits(phys));
+
+ phys += SLI_PAGE_SIZE;
+ }
+
+ return EFC_SUCCESS;
+}
+
+u32
+sli_fc_get_rpi_requirements(struct sli4 *sli4, u32 n_rpi)
+{
+ u32 bytes = 0;
+
+ /* Check if header templates needed */
+ if (sli4->params.hdr_template_req)
+ /* round up to a page */
+ bytes = round_up(n_rpi * SLI4_HDR_TEMPLATE_SIZE, SLI_PAGE_SIZE);
+
+ return bytes;
+}
+
+const char *
+sli_fc_get_status_string(u32 status)
+{
+ static struct {
+ u32 code;
+ const char *label;
+ } lookup[] = {
+ {SLI4_FC_WCQE_STATUS_SUCCESS, "SUCCESS"},
+ {SLI4_FC_WCQE_STATUS_FCP_RSP_FAILURE, "FCP_RSP_FAILURE"},
+ {SLI4_FC_WCQE_STATUS_REMOTE_STOP, "REMOTE_STOP"},
+ {SLI4_FC_WCQE_STATUS_LOCAL_REJECT, "LOCAL_REJECT"},
+ {SLI4_FC_WCQE_STATUS_NPORT_RJT, "NPORT_RJT"},
+ {SLI4_FC_WCQE_STATUS_FABRIC_RJT, "FABRIC_RJT"},
+ {SLI4_FC_WCQE_STATUS_NPORT_BSY, "NPORT_BSY"},
+ {SLI4_FC_WCQE_STATUS_FABRIC_BSY, "FABRIC_BSY"},
+ {SLI4_FC_WCQE_STATUS_LS_RJT, "LS_RJT"},
+ {SLI4_FC_WCQE_STATUS_CMD_REJECT, "CMD_REJECT"},
+ {SLI4_FC_WCQE_STATUS_FCP_TGT_LENCHECK, "FCP_TGT_LENCHECK"},
+ {SLI4_FC_WCQE_STATUS_RQ_BUF_LEN_EXCEEDED, "BUF_LEN_EXCEEDED"},
+ {SLI4_FC_WCQE_STATUS_RQ_INSUFF_BUF_NEEDED,
+ "RQ_INSUFF_BUF_NEEDED"},
+ {SLI4_FC_WCQE_STATUS_RQ_INSUFF_FRM_DISC, "RQ_INSUFF_FRM_DESC"},
+ {SLI4_FC_WCQE_STATUS_RQ_DMA_FAILURE, "RQ_DMA_FAILURE"},
+ {SLI4_FC_WCQE_STATUS_FCP_RSP_TRUNCATE, "FCP_RSP_TRUNCATE"},
+ {SLI4_FC_WCQE_STATUS_DI_ERROR, "DI_ERROR"},
+ {SLI4_FC_WCQE_STATUS_BA_RJT, "BA_RJT"},
+ {SLI4_FC_WCQE_STATUS_RQ_INSUFF_XRI_NEEDED,
+ "RQ_INSUFF_XRI_NEEDED"},
+ {SLI4_FC_WCQE_STATUS_RQ_INSUFF_XRI_DISC, "INSUFF_XRI_DISC"},
+ {SLI4_FC_WCQE_STATUS_RX_ERROR_DETECT, "RX_ERROR_DETECT"},
+ {SLI4_FC_WCQE_STATUS_RX_ABORT_REQUEST, "RX_ABORT_REQUEST"},
+ };
+ u32 i;
+
+ for (i = 0; i < ARRAY_SIZE(lookup); i++) {
+ if (status == lookup[i].code)
+ return lookup[i].label;
+ }
+ return "unknown";
+}
@@ -3716,4 +3716,400 @@ sli_cmd_fill_hdr(struct sli4_rqst_hdr *hdr, u8 opc, u8 sub, u32 ver, __le32 len)
hdr->request_length = len;
}
+/**
+ * Get / set parameter functions
+ */
+
+static inline u32
+sli_get_max_sge(struct sli4 *sli4)
+{
+ return sli4->sge_supported_length;
+}
+
+static inline u32
+sli_get_max_sgl(struct sli4 *sli4)
+{
+ if (sli4->sgl_page_sizes != 1) {
+ efc_log_err(sli4, "unsupported SGL page sizes %#x\n",
+ sli4->sgl_page_sizes);
+ return 0;
+ }
+
+ return (sli4->max_sgl_pages * SLI_PAGE_SIZE) / sizeof(struct sli4_sge);
+}
+
+static inline enum sli4_link_medium
+sli_get_medium(struct sli4 *sli4)
+{
+ switch (sli4->topology) {
+ case SLI4_READ_CFG_TOPO_FC:
+ case SLI4_READ_CFG_TOPO_FC_AL:
+ case SLI4_READ_CFG_TOPO_NON_FC_AL:
+ return SLI4_LINK_MEDIUM_FC;
+ default:
+ return SLI4_LINK_MEDIUM_MAX;
+ }
+}
+
+static inline int
+sli_set_topology(struct sli4 *sli4, u32 value)
+{
+ int rc = 0;
+
+ switch (value) {
+ case SLI4_READ_CFG_TOPO_FC:
+ case SLI4_READ_CFG_TOPO_FC_AL:
+ case SLI4_READ_CFG_TOPO_NON_FC_AL:
+ sli4->topology = value;
+ break;
+ default:
+ efc_log_err(sli4, "unsupported topology %#x\n", value);
+ rc = -1;
+ }
+
+ return rc;
+}
+
+static inline u32
+sli_convert_mask_to_count(u32 method, u32 mask)
+{
+ u32 count = 0;
+
+ if (method) {
+ count = 1 << (31 - __builtin_clz(mask));
+ count *= 16;
+ } else {
+ count = mask;
+ }
+
+ return count;
+}
+
+static inline u32
+sli_reg_read_status(struct sli4 *sli)
+{
+ return readl(sli->reg[0] + SLI4_PORT_STATUS_REGOFF);
+}
+
+static inline int
+sli_fw_error_status(struct sli4 *sli4)
+{
+ return (sli_reg_read_status(sli4) & SLI4_PORT_STATUS_ERR) ? 1 : 0;
+}
+
+static inline u32
+sli_reg_read_err1(struct sli4 *sli)
+{
+ return readl(sli->reg[0] + SLI4_PORT_ERROR1);
+}
+
+static inline u32
+sli_reg_read_err2(struct sli4 *sli)
+{
+ return readl(sli->reg[0] + SLI4_PORT_ERROR2);
+}
+
+static inline int
+sli_fc_rqe_length(struct sli4 *sli4, void *cqe, u32 *len_hdr,
+ u32 *len_data)
+{
+ struct sli4_fc_async_rcqe *rcqe = cqe;
+
+ *len_hdr = *len_data = 0;
+
+ if (rcqe->status == SLI4_FC_ASYNC_RQ_SUCCESS) {
+ *len_hdr = rcqe->hdpl_byte & SLI4_RACQE_HDPL;
+ *len_data = le16_to_cpu(rcqe->data_placement_length);
+ return 0;
+ } else {
+ return -1;
+ }
+}
+
+static inline u8
+sli_fc_rqe_fcfi(struct sli4 *sli4, void *cqe)
+{
+ u8 code = ((u8 *)cqe)[SLI4_CQE_CODE_OFFSET];
+ u8 fcfi = U8_MAX;
+
+ switch (code) {
+ case SLI4_CQE_CODE_RQ_ASYNC: {
+ struct sli4_fc_async_rcqe *rcqe = cqe;
+
+ fcfi = le16_to_cpu(rcqe->fcfi_rq_id_word) & SLI4_RACQE_FCFI;
+ break;
+ }
+ case SLI4_CQE_CODE_RQ_ASYNC_V1: {
+ struct sli4_fc_async_rcqe_v1 *rcqev1 = cqe;
+
+ fcfi = rcqev1->fcfi_byte & SLI4_RACQE_FCFI;
+ break;
+ }
+ case SLI4_CQE_CODE_OPTIMIZED_WRITE_CMD: {
+ struct sli4_fc_optimized_write_cmd_cqe *opt_wr = cqe;
+
+ fcfi = opt_wr->flags0 & SLI4_OCQE_FCFI;
+ break;
+ }
+ }
+
+ return fcfi;
+}
+
+/****************************************************************************
+ * Function prototypes
+ */
+int
+sli_cmd_config_link(struct sli4 *sli4, void *buf);
+int
+sli_cmd_down_link(struct sli4 *sli4, void *buf);
+int
+sli_cmd_dump_type4(struct sli4 *sli4, void *buf, u16 wki);
+int
+sli_cmd_common_read_transceiver_data(struct sli4 *sli4, void *buf,
+ u32 page_num, struct efc_dma *dma);
+int
+sli_cmd_read_link_stats(struct sli4 *sli4, void *buf, u8 req_stats,
+ u8 clear_overflow_flags, u8 clear_all_counters);
+int
+sli_cmd_read_status(struct sli4 *sli4, void *buf, u8 clear);
+int
+sli_cmd_init_link(struct sli4 *sli4, void *buf, u32 speed,
+ u8 reset_alpa);
+int
+sli_cmd_init_vfi(struct sli4 *sli4, void *buf, u16 vfi, u16 fcfi,
+ u16 vpi);
+int
+sli_cmd_init_vpi(struct sli4 *sli4, void *buf, u16 vpi, u16 vfi);
+int
+sli_cmd_post_xri(struct sli4 *sli4, void *buf, u16 base, u16 cnt);
+int
+sli_cmd_release_xri(struct sli4 *sli4, void *buf, u8 num_xri);
+int
+sli_cmd_read_sparm64(struct sli4 *sli4, void *buf,
+ struct efc_dma *dma, u16 vpi);
+int
+sli_cmd_read_topology(struct sli4 *sli4, void *buf, struct efc_dma *dma);
+int
+sli_cmd_read_nvparms(struct sli4 *sli4, void *buf);
+int
+sli_cmd_write_nvparms(struct sli4 *sli4, void *buf, u8 *wwpn,
+ u8 *wwnn, u8 hard_alpa, u32 preferred_d_id);
+int
+sli_cmd_reg_fcfi(struct sli4 *sli4, void *buf, u16 index,
+ struct sli4_cmd_rq_cfg *rq_cfg);
+int
+sli_cmd_reg_fcfi_mrq(struct sli4 *sli4, void *buf, u8 mode, u16 index,
+ u8 rq_selection_policy, u8 mrq_bit_mask, u16 num_mrqs,
+ struct sli4_cmd_rq_cfg *rq_cfg);
+int
+sli_cmd_reg_rpi(struct sli4 *sli4, void *buf, u32 rpi, u32 vpi, u32 fc_id,
+ struct efc_dma *dma, u8 update, u8 enable_t10_pi);
+int
+sli_cmd_unreg_fcfi(struct sli4 *sli4, void *buf, u16 indicator);
+int
+sli_cmd_unreg_rpi(struct sli4 *sli4, void *buf, u16 indicator,
+ enum sli4_resource which, u32 fc_id);
+int
+sli_cmd_reg_vpi(struct sli4 *sli4, void *buf, u32 fc_id,
+ __be64 sli_wwpn, u16 vpi, u16 vfi, bool update);
+int
+sli_cmd_reg_vfi(struct sli4 *sli4, void *buf, size_t size,
+ u16 vfi, u16 fcfi, struct efc_dma dma,
+ u16 vpi, __be64 sli_wwpn, u32 fc_id);
+int
+sli_cmd_unreg_vpi(struct sli4 *sli4, void *buf, u16 id, u32 type);
+int
+sli_cmd_unreg_vfi(struct sli4 *sli4, void *buf, u16 idx, u32 type);
+int
+sli_cmd_common_nop(struct sli4 *sli4, void *buf, uint64_t context);
+int
+sli_cmd_common_get_resource_extent_info(struct sli4 *sli4, void *buf,
+ u16 rtype);
+int
+sli_cmd_common_get_sli4_parameters(struct sli4 *sli4, void *buf);
+int
+sli_cmd_common_write_object(struct sli4 *sli4, void *buf, u16 noc,
+ u16 eof, u32 len, u32 offset, char *name, struct efc_dma *dma);
+int
+sli_cmd_common_delete_object(struct sli4 *sli4, void *buf, char *object_name);
+int
+sli_cmd_common_read_object(struct sli4 *sli4, void *buf,
+ u32 length, u32 offset, char *name, struct efc_dma *dma);
+int
+sli_cmd_dmtf_exec_clp_cmd(struct sli4 *sli4, void *buf,
+ struct efc_dma *cmd, struct efc_dma *resp);
+int
+sli_cmd_common_set_dump_location(struct sli4 *sli4, void *buf,
+ bool query, bool is_buffer_list, struct efc_dma *dma, u8 fdb);
+int
+sli_cmd_common_set_features(struct sli4 *sli4, void *buf,
+ u32 feature, u32 param_len, void *parameter);
+
+int sli_cqe_mq(struct sli4 *sli4, void *buf);
+int sli_cqe_async(struct sli4 *sli4, void *buf);
+
+int
+sli_setup(struct sli4 *sli4, void *os, struct pci_dev *pdev, void __iomem *r[]);
+void sli_calc_max_qentries(struct sli4 *sli4);
+int sli_init(struct sli4 *sli4);
+int sli_reset(struct sli4 *sli4);
+int sli_fw_reset(struct sli4 *sli4);
+void sli_teardown(struct sli4 *sli4);
+int
+sli_callback(struct sli4 *sli4, enum sli4_callback cb, void *func, void *arg);
+int
+sli_bmbx_command(struct sli4 *sli4);
+int
+__sli_queue_init(struct sli4 *sli4, struct sli4_queue *q, u32 qtype,
+ size_t size, u32 n_entries, u32 align);
+int
+__sli_create_queue(struct sli4 *sli4, struct sli4_queue *q);
+int
+sli_eq_modify_delay(struct sli4 *sli4, struct sli4_queue *eq, u32 num_eq,
+ u32 shift, u32 delay_mult);
+int
+sli_queue_alloc(struct sli4 *sli4, u32 qtype, struct sli4_queue *q,
+ u32 n_entries, struct sli4_queue *assoc);
+int
+sli_cq_alloc_set(struct sli4 *sli4, struct sli4_queue *qs[], u32 num_cqs,
+ u32 n_entries, struct sli4_queue *eqs[]);
+int
+sli_get_queue_entry_size(struct sli4 *sli4, u32 qtype);
+int
+sli_queue_free(struct sli4 *sli4, struct sli4_queue *q, u32 destroy_queues,
+ u32 free_memory);
+int
+sli_queue_eq_arm(struct sli4 *sli4, struct sli4_queue *q, bool arm);
+int
+sli_queue_arm(struct sli4 *sli4, struct sli4_queue *q, bool arm);
+
+int
+sli_wq_write(struct sli4 *sli4, struct sli4_queue *q, u8 *entry);
+int
+sli_mq_write(struct sli4 *sli4, struct sli4_queue *q, u8 *entry);
+int
+sli_rq_write(struct sli4 *sli4, struct sli4_queue *q, u8 *entry);
+int
+sli_eq_read(struct sli4 *sli4, struct sli4_queue *q, u8 *entry);
+int
+sli_cq_read(struct sli4 *sli4, struct sli4_queue *q, u8 *entry);
+int
+sli_mq_read(struct sli4 *sli4, struct sli4_queue *q, u8 *entry);
+int
+sli_resource_alloc(struct sli4 *sli4, enum sli4_resource rtype, u32 *rid,
+ u32 *index);
+int
+sli_resource_free(struct sli4 *sli4, enum sli4_resource rtype, u32 rid);
+int
+sli_resource_reset(struct sli4 *sli4, enum sli4_resource rtype);
+int
+sli_eq_parse(struct sli4 *sli4, u8 *buf, u16 *cq_id);
+int
+sli_cq_parse(struct sli4 *sli4, struct sli4_queue *cq, u8 *cqe,
+ enum sli4_qentry *etype, u16 *q_id);
+
+int sli_raise_ue(struct sli4 *sli4, u8 dump);
+int sli_dump_is_ready(struct sli4 *sli4);
+bool sli_reset_required(struct sli4 *sli4);
+bool sli_fw_ready(struct sli4 *sli4);
+
+int
+sli_fc_process_link_attention(struct sli4 *sli4, void *acqe);
+int
+sli_fc_cqe_parse(struct sli4 *sli4, struct sli4_queue *cq,
+ u8 *cqe, enum sli4_qentry *etype,
+ u16 *rid);
+u32 sli_fc_response_length(struct sli4 *sli4, u8 *cqe);
+u32 sli_fc_io_length(struct sli4 *sli4, u8 *cqe);
+int sli_fc_els_did(struct sli4 *sli4, u8 *cqe, u32 *d_id);
+u32 sli_fc_ext_status(struct sli4 *sli4, u8 *cqe);
+int
+sli_fc_rqe_rqid_and_index(struct sli4 *sli4, u8 *cqe, u16 *rq_id, u32 *index);
+int
+sli_cmd_wq_create(struct sli4 *sli4, void *buf,
+ struct efc_dma *qmem, u16 cq_id);
+int sli_cmd_post_sgl_pages(struct sli4 *sli4, void *buf, u16 xri,
+ u32 xri_count, struct efc_dma *page0[], struct efc_dma *page1[],
+ struct efc_dma *dma);
+int
+sli_cmd_post_hdr_templates(struct sli4 *sli4, void *buf,
+ struct efc_dma *dma, u16 rpi, struct efc_dma *payload_dma);
+int
+sli_fc_rq_alloc(struct sli4 *sli4, struct sli4_queue *q, u32 n_entries,
+ u32 buffer_size, struct sli4_queue *cq, bool is_hdr);
+int
+sli_fc_rq_set_alloc(struct sli4 *sli4, u32 num_rq_pairs, struct sli4_queue *q[],
+ u32 base_cq_id, u32 num, u32 hdr_buf_size, u32 data_buf_size);
+u32 sli_fc_get_rpi_requirements(struct sli4 *sli4, u32 n_rpi);
+int
+sli_abort_wqe(struct sli4 *sli4, void *buf, enum sli4_abort_type type,
+ bool send_abts, u32 ids, u32 mask, u16 tag, u16 cq_id);
+
+int
+sli_send_frame_wqe(struct sli4 *sli4, void *buf, u8 sof, u8 eof,
+ u32 *hdr, struct efc_dma *payload, u32 req_len, u8 timeout,
+ u16 xri, u16 req_tag);
+
+int
+sli_xmit_els_rsp64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *rsp,
+ struct sli_els_params *params);
+
+int
+sli_els_request64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *sgl,
+ struct sli_els_params *params);
+
+int
+sli_fcp_icmnd64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *sgl, u16 xri,
+ u16 tag, u16 cq_id, u32 rpi, u32 rnode_fcid, u8 timeout);
+
+int
+sli_fcp_iread64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *sgl,
+ u32 first_data_sge, u32 xfer_len, u16 xri,
+ u16 tag, u16 cq_id, u32 rpi, u32 rnode_fcid, u8 dif, u8 bs,
+ u8 timeout);
+
+int
+sli_fcp_iwrite64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *sgl,
+ u32 first_data_sge, u32 xfer_len,
+ u32 first_burst, u16 xri, u16 tag, u16 cq_id, u32 rpi,
+ u32 rnode_fcid, u8 dif, u8 bs, u8 timeout);
+
+int
+sli_fcp_treceive64_wqe(struct sli4 *sli, void *buf, struct efc_dma *sgl,
+ u32 first_data_sge, u16 cq_id, u8 dif, u8 bs,
+ struct sli_fcp_tgt_params *params);
+int
+sli_fcp_cont_treceive64_wqe(struct sli4 *sli, void *buf, struct efc_dma *sgl,
+ u32 first_data_sge, u16 sec_xri, u16 cq_id, u8 dif,
+ u8 bs, struct sli_fcp_tgt_params *params);
+
+int
+sli_fcp_trsp64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *sgl,
+ u16 cq_id, u8 port_owned, struct sli_fcp_tgt_params *params);
+
+int
+sli_fcp_tsend64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *sgl,
+ u32 first_data_sge, u16 cq_id, u8 dif, u8 bs,
+ struct sli_fcp_tgt_params *params);
+int
+sli_gen_request64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *sgl,
+ struct sli_ct_params *params);
+
+int
+sli_xmit_bls_rsp64_wqe(struct sli4 *sli4, void *buf,
+ struct sli_bls_payload *payload, struct sli_bls_params *params);
+
+int
+sli_xmit_sequence64_wqe(struct sli4 *sli4, void *buf, struct efc_dma *payload,
+ struct sli_ct_params *params);
+
+int
+sli_requeue_xri_wqe(struct sli4 *sli4, void *buf, u16 xri, u16 tag, u16 cq_id);
+void
+sli4_cmd_lowlevel_set_watchdog(struct sli4 *sli4, void *buf, size_t size,
+ u16 timeout);
+
+const char *sli_fc_get_status_string(u32 status);
+
#endif /* !_SLI4_H */