diff mbox series

[1/3] scsi: hisi_sas: Configure initial value of some registers according to HBA model

Message ID 1684118481-95908-2-git-send-email-chenxiang66@hisilicon.com
State New
Headers show
Series scsi: hisi_sas: Some misc changes | expand

Commit Message

chenxiang May 15, 2023, 2:41 a.m. UTC 
From: Yihang Li <liyihang9@huawei.com>

For SAS HBAs of 920 and previous version, we use init_reg_v3_hw() to set
some registers which are related to HW boards. For SAS HBAs of 920B and
later version, those HW registers are set through firmware. And different
HBA models are distinguished through pci_dev->revision.

Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 12d5884..e279c9c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -627,12 +627,12 @@  static void interrupt_enable_v3_hw(struct hisi_hba *hisi_hba)
 
 static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
 {
+	struct pci_dev *pdev = hisi_hba->pci_dev;
 	int i, j;
 
 	/* Global registers init */
 	hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE,
 			 (u32)((1ULL << hisi_hba->queue_count) - 1));
-	hisi_sas_write32(hisi_hba, SAS_AXI_USER3, 0);
 	hisi_sas_write32(hisi_hba, CFG_MAX_TAG, 0xfff0400);
 	hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x108);
 	hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x1);
@@ -652,6 +652,9 @@  static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
 	hisi_sas_write32(hisi_hba, ARQOS_ARCACHE_CFG, 0xf0f0);
 	hisi_sas_write32(hisi_hba, HYPER_STREAM_ID_EN_CFG, 1);
 
+	if (pdev->revision < 0x30)
+		hisi_sas_write32(hisi_hba, SAS_AXI_USER3, 0);
+
 	interrupt_enable_v3_hw(hisi_hba);
 	for (i = 0; i < hisi_hba->n_phy; i++) {
 		enum sas_linkrate max;
@@ -669,7 +672,6 @@  static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
 		prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max);
 		hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE,
 			prog_phy_link_rate);
-		hisi_sas_phy_write32(hisi_hba, i, SERDES_CFG, 0xffc00);
 		hisi_sas_phy_write32(hisi_hba, i, SAS_RX_TRAIN_TIMER, 0x13e80);
 		hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, 0xffffffff);
 		hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff);
@@ -680,13 +682,18 @@  static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
 		hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x1);
 		hisi_sas_phy_write32(hisi_hba, i, STP_LINK_TIMER, 0x7f7a120);
 		hisi_sas_phy_write32(hisi_hba, i, CON_CFG_DRIVER, 0x2a0a01);
-		hisi_sas_phy_write32(hisi_hba, i, SAS_SSP_CON_TIMER_CFG, 0x32);
 		hisi_sas_phy_write32(hisi_hba, i, SAS_EC_INT_COAL_TIME,
 				     0x30f4240);
-		/* used for 12G negotiate */
-		hisi_sas_phy_write32(hisi_hba, i, COARSETUNE_TIME, 0x1e);
 		hisi_sas_phy_write32(hisi_hba, i, AIP_LIMIT, 0x2ffff);
 
+		/* set value through firmware for 920B and later version */
+		if (pdev->revision < 0x30) {
+			hisi_sas_phy_write32(hisi_hba, i, SAS_SSP_CON_TIMER_CFG, 0x32);
+			hisi_sas_phy_write32(hisi_hba, i, SERDES_CFG, 0xffc00);
+			/* used for 12G negotiate */
+			hisi_sas_phy_write32(hisi_hba, i, COARSETUNE_TIME, 0x1e);
+		}
+
 		/* get default FFE configuration for BIST */
 		for (j = 0; j < FFE_CFG_MAX; j++) {
 			u32 val = hisi_sas_phy_read32(hisi_hba, i,