@@ -243,6 +243,7 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba);
static int ufshcd_change_power_mode(struct ufs_hba *hba,
struct ufs_pa_layer_attr *pwr_mode);
static void ufshcd_schedule_eh_work(struct ufs_hba *hba);
+static void ufshcd_recover_pm_error(struct ufs_hba *hba);
static int ufshcd_setup_hba_vreg(struct ufs_hba *hba, bool on);
static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on);
static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
@@ -5951,13 +5952,15 @@ static int ufshcd_err_handling_prepare(struct ufs_hba *hba)
return 0;
}
-static void ufshcd_err_handling_unprepare(struct ufs_hba *hba)
+static void ufshcd_err_handling_unprepare(struct ufs_hba *hba, int reset_err)
{
ufshcd_clear_eh_in_progress(hba);
ufshcd_scsi_unblock_requests(hba);
ufshcd_release(hba);
if (ufshcd_is_clkscaling_supported(hba))
ufshcd_clk_scaling_suspend(hba, false);
+ if (!reset_err)
+ ufshcd_recover_pm_error(hba);
ufshcd_clear_ua_wluns(hba);
ufshcd_rpm_put(hba);
pm_runtime_put(hba->dev);
@@ -5976,34 +5979,26 @@ static inline bool ufshcd_err_handling_should_stop(struct ufs_hba *hba)
static void ufshcd_recover_pm_error(struct ufs_hba *hba)
{
struct Scsi_Host *shost = hba->host;
- struct scsi_device *sdev;
- struct request_queue *q;
+ struct scsi_device *sdev = hba->sdev_ufs_device;
+ struct scsi_target *starget = sdev->sdev_target;
int ret;
hba->is_wl_sys_suspended = false;
- /*
- * Set RPM status of wlun device to RPM_ACTIVE,
- * this also clears its runtime error.
- */
- ret = pm_runtime_set_active(&hba->sdev_ufs_device->sdev_gendev);
- /* hba device might have a runtime error otherwise */
- if (ret)
- ret = pm_runtime_set_active(hba->dev);
- /*
- * If wlun device had runtime error, we also need to resume those
- * consumer scsi devices in case any of them has failed to be
- * resumed due to supplier runtime resume failure. This is to unblock
- * blk_queue_enter in case there are bios waiting inside it.
- */
- if (!ret) {
- shost_for_each_device(sdev, shost) {
- q = sdev->request_queue;
- if (q->dev && (q->rpm_status == RPM_SUSPENDED ||
- q->rpm_status == RPM_SUSPENDING))
- pm_request_resume(q->dev);
- }
+ /* Resume parent/target to clear path for pm_runtime_set_active() */
+ pm_runtime_get_sync(&starget->dev);
+ shost_for_each_device(sdev, shost) {
+ struct device *dev = &sdev->sdev_gendev;
+
+ pm_runtime_get_sync(dev);
+ /* Clear dev->power.runtime_error */
+ ret = pm_runtime_set_active(dev);
+ if (!ret)
+ /* runtime_error cleared, kick blk_queue_enter() */
+ blk_set_runtime_active(sdev->request_queue);
+ pm_runtime_put(dev);
}
+ pm_runtime_put(&starget->dev);
}
#else
static inline void ufshcd_recover_pm_error(struct ufs_hba *hba)
@@ -6037,7 +6032,7 @@ static void ufshcd_err_handler(struct work_struct *work)
unsigned long flags;
bool err_xfer = false;
bool err_tm = false;
- int err = 0, pmc_err;
+ int err = -1, pmc_err;
int tag;
bool needs_reset = false, needs_restore = false;
@@ -6189,8 +6184,6 @@ static void ufshcd_err_handler(struct work_struct *work)
if (err)
dev_err(hba->dev, "%s: reset and restore failed with err %d\n",
__func__, err);
- else
- ufshcd_recover_pm_error(hba);
spin_lock_irqsave(hba->host->host_lock, flags);
}
@@ -6203,7 +6196,7 @@ static void ufshcd_err_handler(struct work_struct *work)
__func__, hba->saved_err, hba->saved_uic_err);
}
spin_unlock_irqrestore(hba->host->host_lock, flags);
- ufshcd_err_handling_unprepare(hba);
+ ufshcd_err_handling_unprepare(hba, err);
up(&hba->host_sem);
}
After error handler performs a successful reset and restore, all the LUs become active, forcibly set the runtime PM status of the scsi devices (and their request queues) underneath hba to ACTIVE to reflect the change. By doing so, dev->power.runtime_error (if any) can also be cleared, such that runtime PM can get back to work on them, otherwise the device(s) may be left either runtime active or runtime suspended permanently. Signed-off-by: Can Guo <cang@codeaurora.org> --- drivers/scsi/ufs/ufshcd.c | 49 ++++++++++++++++++++--------------------------- 1 file changed, 21 insertions(+), 28 deletions(-)