Message ID | 1594297400-24756-3-git-send-email-john.garry@huawei.com |
---|---|
State | New |
Headers | show |
Series | scsi: scsi_debug: Support hostwide tags and a fix | expand |
On 2020-07-09 8:23 a.m., John Garry wrote: > Many SCSI HBAs support a hostwide tagset, whereby each command submitted > to the HW from all submission queues must have a unique tag identifier. > > Normally this unique tag will be in the range [0, max queue), where "max > queue" is the depth of each of the submission queues. > > Add support for this hostwide tag feature, via module parameter > "host_max_queue". A non-zero value means that the feature is enabled. In > this case, the submission queues are not exposed to upper layer, i.e. from > blk-mq prespective, the device has a single hw queue. There are 2 reasons > for this: > a. it is assumed that the host can support nr_hw_queues * can_queue > commands, but this is not true for hostwide tags > b. for nr_hw_queues != 0, the request tag is not unique over all HW queues, > and some HBA drivers want to use this tag for the hostwide tag > > However, like many SCSI HBA drivers today - megaraid sas being an example - > the full set of HW submission queues are still used in the LLDD driver. So > instead of using a complicated "reply_map" to create a per-CPU submission > queue mapping like megaraid sas (as it depends on a PCI device + MSIs) - > use a simple algorithm: > > hwq = cpu % queue count > > If the host max queue param is set non-zero, then the max queue depth is > fixed at this value also. > > If and when hostwide shared tags are supported in blk-mq/scsi mid-layer, > then the policy to set nr_hw_queues = 0 for hostwide tags can be revised. > > Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> I have updated this page to reflect this addition: http://sg.danny.cz/sg/scsi_debug.html > --- > drivers/scsi/scsi_debug.c | 80 +++++++++++++++++++++++++++++++++------ > 1 file changed, 68 insertions(+), 12 deletions(-) > > diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c > index 68534a23866e..2246d721ec88 100644 > --- a/drivers/scsi/scsi_debug.c > +++ b/drivers/scsi/scsi_debug.c > @@ -344,6 +344,7 @@ struct sdebug_defer { > struct execute_work ew; > int sqa_idx; /* index of sdebug_queue array */ > int qc_idx; /* index of sdebug_queued_cmd array within sqa_idx */ > + int hc_idx; /* hostwide tag index */ > int issuing_cpu; > bool init_hrt; > bool init_wq; > @@ -759,6 +760,7 @@ static int sdebug_dsense = DEF_D_SENSE; > static int sdebug_every_nth = DEF_EVERY_NTH; > static int sdebug_fake_rw = DEF_FAKE_RW; > static unsigned int sdebug_guard = DEF_GUARD; > +static int sdebug_host_max_queue; /* per host */ > static int sdebug_lowest_aligned = DEF_LOWEST_ALIGNED; > static int sdebug_max_luns = DEF_MAX_LUNS; > static int sdebug_max_queue = SDEBUG_CANQUEUE; /* per submit queue */ > @@ -4707,15 +4709,28 @@ static int resp_rwp_zone(struct scsi_cmnd *scp, struct sdebug_dev_info *devip) > > static struct sdebug_queue *get_queue(struct scsi_cmnd *cmnd) > { > - u32 tag = blk_mq_unique_tag(cmnd->request); > - u16 hwq = blk_mq_unique_tag_to_hwq(tag); > + u16 hwq; > > - pr_debug("tag=%#x, hwq=%d\n", tag, hwq); > - if (WARN_ON_ONCE(hwq >= submit_queues)) > - hwq = 0; > + if (sdebug_host_max_queue) { > + /* Provide a simple method to choose the hwq */ > + hwq = smp_processor_id() % submit_queues; > + } else { > + u32 tag = blk_mq_unique_tag(cmnd->request); > + > + hwq = blk_mq_unique_tag_to_hwq(tag); > + > + pr_debug("tag=%#x, hwq=%d\n", tag, hwq); > + if (WARN_ON_ONCE(hwq >= submit_queues)) > + hwq = 0; > + } > return sdebug_q_arr + hwq; > } > > +static u32 get_tag(struct scsi_cmnd *cmnd) > +{ > + return blk_mq_unique_tag(cmnd->request); > +} > + > /* Queued (deferred) command completions converge here. */ > static void sdebug_q_cmd_complete(struct sdebug_defer *sd_dp) > { > @@ -4747,8 +4762,8 @@ static void sdebug_q_cmd_complete(struct sdebug_defer *sd_dp) > scp = sqcp->a_cmnd; > if (unlikely(scp == NULL)) { > spin_unlock_irqrestore(&sqp->qc_lock, iflags); > - pr_err("scp is NULL, sqa_idx=%d, qc_idx=%d\n", > - sd_dp->sqa_idx, qc_idx); > + pr_err("scp is NULL, sqa_idx=%d, qc_idx=%d, hc_idx=%d\n", > + sd_dp->sqa_idx, qc_idx, sd_dp->hc_idx); > return; > } > devip = (struct sdebug_dev_info *)scp->device->hostdata; > @@ -5451,6 +5466,10 @@ static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip, > new_sd_dp = false; > } > > + /* Set the hostwide tag */ > + if (sdebug_host_max_queue) > + sd_dp->hc_idx = get_tag(cmnd); > + > if (ndelay > 0 && ndelay < INCLUSIVE_TIMING_MAX_NS) > ns_from_boot = ktime_get_boottime_ns(); > > @@ -5572,6 +5591,7 @@ module_param_named(every_nth, sdebug_every_nth, int, S_IRUGO | S_IWUSR); > module_param_named(fake_rw, sdebug_fake_rw, int, S_IRUGO | S_IWUSR); > module_param_named(guard, sdebug_guard, uint, S_IRUGO); > module_param_named(host_lock, sdebug_host_lock, bool, S_IRUGO | S_IWUSR); > +module_param_named(host_max_queue, sdebug_host_max_queue, int, S_IRUGO); > module_param_string(inq_product, sdebug_inq_product_id, > sizeof(sdebug_inq_product_id), S_IRUGO | S_IWUSR); > module_param_string(inq_rev, sdebug_inq_product_rev, > @@ -5642,6 +5662,8 @@ MODULE_PARM_DESC(every_nth, "timeout every nth command(def=0)"); > MODULE_PARM_DESC(fake_rw, "fake reads/writes instead of copying (def=0)"); > MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)"); > MODULE_PARM_DESC(host_lock, "host_lock is ignored (def=0)"); > +MODULE_PARM_DESC(host_max_queue, > + "host max # of queued cmds (0 to max(def) [max_queue fixed equal for !0])"); > MODULE_PARM_DESC(inq_product, "SCSI INQUIRY product string (def=\"scsi_debug\")"); > MODULE_PARM_DESC(inq_rev, "SCSI INQUIRY revision string (def=\"" > SDEBUG_VERSION "\")"); > @@ -6141,7 +6163,8 @@ static ssize_t max_queue_store(struct device_driver *ddp, const char *buf, > struct sdebug_queue *sqp; > > if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n > 0) && > - (n <= SDEBUG_CANQUEUE)) { > + (n <= SDEBUG_CANQUEUE) && > + (sdebug_host_max_queue == 0)) { > block_unblock_all_queues(true); > k = 0; > for (j = 0, sqp = sdebug_q_arr; j < submit_queues; > @@ -6164,6 +6187,17 @@ static ssize_t max_queue_store(struct device_driver *ddp, const char *buf, > } > static DRIVER_ATTR_RW(max_queue); > > +static ssize_t host_max_queue_show(struct device_driver *ddp, char *buf) > +{ > + return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_host_max_queue); > +} > + > +/* > + * Since this is used for .can_queue, and we get the hc_idx tag from the bitmap > + * in range [0, sdebug_host_max_queue), we can't change it. > + */ > +static DRIVER_ATTR_RO(host_max_queue); > + > static ssize_t no_uld_show(struct device_driver *ddp, char *buf) > { > return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_no_uld); > @@ -6503,6 +6537,7 @@ static struct attribute *sdebug_drv_attrs[] = { > &driver_attr_ptype.attr, > &driver_attr_dsense.attr, > &driver_attr_fake_rw.attr, > + &driver_attr_host_max_queue.attr, > &driver_attr_no_lun_0.attr, > &driver_attr_num_tgts.attr, > &driver_attr_dev_size_mb.attr, > @@ -6619,6 +6654,20 @@ static int __init scsi_debug_init(void) > return -EINVAL; > } > > + if ((sdebug_host_max_queue > SDEBUG_CANQUEUE) || > + (sdebug_host_max_queue < 0)) { > + pr_err("host_max_queue must be in range [0 %d]\n", > + SDEBUG_CANQUEUE); > + return -EINVAL; > + } > + > + if (sdebug_host_max_queue && > + (sdebug_max_queue != sdebug_host_max_queue)) { > + sdebug_max_queue = sdebug_host_max_queue; > + pr_warn("fixing max submit queue depth to host max queue depth, %d\n", > + sdebug_max_queue); > + } > + > sdebug_q_arr = kcalloc(submit_queues, sizeof(struct sdebug_queue), > GFP_KERNEL); > if (sdebug_q_arr == NULL) > @@ -7257,7 +7306,10 @@ static int sdebug_driver_probe(struct device *dev) > > sdbg_host = to_sdebug_host(dev); > > - sdebug_driver_template.can_queue = sdebug_max_queue; > + if (sdebug_host_max_queue) > + sdebug_driver_template.can_queue = sdebug_host_max_queue; > + else > + sdebug_driver_template.can_queue = sdebug_max_queue; > if (!sdebug_clustering) > sdebug_driver_template.dma_boundary = PAGE_SIZE - 1; > > @@ -7272,9 +7324,13 @@ static int sdebug_driver_probe(struct device *dev) > my_name, submit_queues, nr_cpu_ids); > submit_queues = nr_cpu_ids; > } > - /* Decide whether to tell scsi subsystem that we want mq */ > - /* Following should give the same answer for each host */ > - hpnt->nr_hw_queues = submit_queues; > + /* > + * Decide whether to tell scsi subsystem that we want mq. The > + * following should give the same answer for each host. If the host > + * has a limit of hostwide max commands, then do not set. > + */ > + if (!sdebug_host_max_queue) > + hpnt->nr_hw_queues = submit_queues; > > sdbg_host->shost = hpnt; > *((struct sdebug_host_info **)hpnt->hostdata) = sdbg_host; >
On 09/07/2020 16:25, Douglas Gilbert wrote: >> >> hwq = cpu % queue count >> >> If the host max queue param is set non-zero, then the max queue depth is >> fixed at this value also. >> >> If and when hostwide shared tags are supported in blk-mq/scsi mid-layer, >> then the policy to set nr_hw_queues = 0 for hostwide tags can be revised. >> >> Signed-off-by: John Garry <john.garry@huawei.com> > > Acked-by: Douglas Gilbert <dgilbert@interlog.com> > > I have updated this page to reflect this addition: > http://sg.danny.cz/sg/scsi_debug.html ok, thanks.
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 68534a23866e..2246d721ec88 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -344,6 +344,7 @@ struct sdebug_defer { struct execute_work ew; int sqa_idx; /* index of sdebug_queue array */ int qc_idx; /* index of sdebug_queued_cmd array within sqa_idx */ + int hc_idx; /* hostwide tag index */ int issuing_cpu; bool init_hrt; bool init_wq; @@ -759,6 +760,7 @@ static int sdebug_dsense = DEF_D_SENSE; static int sdebug_every_nth = DEF_EVERY_NTH; static int sdebug_fake_rw = DEF_FAKE_RW; static unsigned int sdebug_guard = DEF_GUARD; +static int sdebug_host_max_queue; /* per host */ static int sdebug_lowest_aligned = DEF_LOWEST_ALIGNED; static int sdebug_max_luns = DEF_MAX_LUNS; static int sdebug_max_queue = SDEBUG_CANQUEUE; /* per submit queue */ @@ -4707,15 +4709,28 @@ static int resp_rwp_zone(struct scsi_cmnd *scp, struct sdebug_dev_info *devip) static struct sdebug_queue *get_queue(struct scsi_cmnd *cmnd) { - u32 tag = blk_mq_unique_tag(cmnd->request); - u16 hwq = blk_mq_unique_tag_to_hwq(tag); + u16 hwq; - pr_debug("tag=%#x, hwq=%d\n", tag, hwq); - if (WARN_ON_ONCE(hwq >= submit_queues)) - hwq = 0; + if (sdebug_host_max_queue) { + /* Provide a simple method to choose the hwq */ + hwq = smp_processor_id() % submit_queues; + } else { + u32 tag = blk_mq_unique_tag(cmnd->request); + + hwq = blk_mq_unique_tag_to_hwq(tag); + + pr_debug("tag=%#x, hwq=%d\n", tag, hwq); + if (WARN_ON_ONCE(hwq >= submit_queues)) + hwq = 0; + } return sdebug_q_arr + hwq; } +static u32 get_tag(struct scsi_cmnd *cmnd) +{ + return blk_mq_unique_tag(cmnd->request); +} + /* Queued (deferred) command completions converge here. */ static void sdebug_q_cmd_complete(struct sdebug_defer *sd_dp) { @@ -4747,8 +4762,8 @@ static void sdebug_q_cmd_complete(struct sdebug_defer *sd_dp) scp = sqcp->a_cmnd; if (unlikely(scp == NULL)) { spin_unlock_irqrestore(&sqp->qc_lock, iflags); - pr_err("scp is NULL, sqa_idx=%d, qc_idx=%d\n", - sd_dp->sqa_idx, qc_idx); + pr_err("scp is NULL, sqa_idx=%d, qc_idx=%d, hc_idx=%d\n", + sd_dp->sqa_idx, qc_idx, sd_dp->hc_idx); return; } devip = (struct sdebug_dev_info *)scp->device->hostdata; @@ -5451,6 +5466,10 @@ static int schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip, new_sd_dp = false; } + /* Set the hostwide tag */ + if (sdebug_host_max_queue) + sd_dp->hc_idx = get_tag(cmnd); + if (ndelay > 0 && ndelay < INCLUSIVE_TIMING_MAX_NS) ns_from_boot = ktime_get_boottime_ns(); @@ -5572,6 +5591,7 @@ module_param_named(every_nth, sdebug_every_nth, int, S_IRUGO | S_IWUSR); module_param_named(fake_rw, sdebug_fake_rw, int, S_IRUGO | S_IWUSR); module_param_named(guard, sdebug_guard, uint, S_IRUGO); module_param_named(host_lock, sdebug_host_lock, bool, S_IRUGO | S_IWUSR); +module_param_named(host_max_queue, sdebug_host_max_queue, int, S_IRUGO); module_param_string(inq_product, sdebug_inq_product_id, sizeof(sdebug_inq_product_id), S_IRUGO | S_IWUSR); module_param_string(inq_rev, sdebug_inq_product_rev, @@ -5642,6 +5662,8 @@ MODULE_PARM_DESC(every_nth, "timeout every nth command(def=0)"); MODULE_PARM_DESC(fake_rw, "fake reads/writes instead of copying (def=0)"); MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)"); MODULE_PARM_DESC(host_lock, "host_lock is ignored (def=0)"); +MODULE_PARM_DESC(host_max_queue, + "host max # of queued cmds (0 to max(def) [max_queue fixed equal for !0])"); MODULE_PARM_DESC(inq_product, "SCSI INQUIRY product string (def=\"scsi_debug\")"); MODULE_PARM_DESC(inq_rev, "SCSI INQUIRY revision string (def=\"" SDEBUG_VERSION "\")"); @@ -6141,7 +6163,8 @@ static ssize_t max_queue_store(struct device_driver *ddp, const char *buf, struct sdebug_queue *sqp; if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n > 0) && - (n <= SDEBUG_CANQUEUE)) { + (n <= SDEBUG_CANQUEUE) && + (sdebug_host_max_queue == 0)) { block_unblock_all_queues(true); k = 0; for (j = 0, sqp = sdebug_q_arr; j < submit_queues; @@ -6164,6 +6187,17 @@ static ssize_t max_queue_store(struct device_driver *ddp, const char *buf, } static DRIVER_ATTR_RW(max_queue); +static ssize_t host_max_queue_show(struct device_driver *ddp, char *buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_host_max_queue); +} + +/* + * Since this is used for .can_queue, and we get the hc_idx tag from the bitmap + * in range [0, sdebug_host_max_queue), we can't change it. + */ +static DRIVER_ATTR_RO(host_max_queue); + static ssize_t no_uld_show(struct device_driver *ddp, char *buf) { return scnprintf(buf, PAGE_SIZE, "%d\n", sdebug_no_uld); @@ -6503,6 +6537,7 @@ static struct attribute *sdebug_drv_attrs[] = { &driver_attr_ptype.attr, &driver_attr_dsense.attr, &driver_attr_fake_rw.attr, + &driver_attr_host_max_queue.attr, &driver_attr_no_lun_0.attr, &driver_attr_num_tgts.attr, &driver_attr_dev_size_mb.attr, @@ -6619,6 +6654,20 @@ static int __init scsi_debug_init(void) return -EINVAL; } + if ((sdebug_host_max_queue > SDEBUG_CANQUEUE) || + (sdebug_host_max_queue < 0)) { + pr_err("host_max_queue must be in range [0 %d]\n", + SDEBUG_CANQUEUE); + return -EINVAL; + } + + if (sdebug_host_max_queue && + (sdebug_max_queue != sdebug_host_max_queue)) { + sdebug_max_queue = sdebug_host_max_queue; + pr_warn("fixing max submit queue depth to host max queue depth, %d\n", + sdebug_max_queue); + } + sdebug_q_arr = kcalloc(submit_queues, sizeof(struct sdebug_queue), GFP_KERNEL); if (sdebug_q_arr == NULL) @@ -7257,7 +7306,10 @@ static int sdebug_driver_probe(struct device *dev) sdbg_host = to_sdebug_host(dev); - sdebug_driver_template.can_queue = sdebug_max_queue; + if (sdebug_host_max_queue) + sdebug_driver_template.can_queue = sdebug_host_max_queue; + else + sdebug_driver_template.can_queue = sdebug_max_queue; if (!sdebug_clustering) sdebug_driver_template.dma_boundary = PAGE_SIZE - 1; @@ -7272,9 +7324,13 @@ static int sdebug_driver_probe(struct device *dev) my_name, submit_queues, nr_cpu_ids); submit_queues = nr_cpu_ids; } - /* Decide whether to tell scsi subsystem that we want mq */ - /* Following should give the same answer for each host */ - hpnt->nr_hw_queues = submit_queues; + /* + * Decide whether to tell scsi subsystem that we want mq. The + * following should give the same answer for each host. If the host + * has a limit of hostwide max commands, then do not set. + */ + if (!sdebug_host_max_queue) + hpnt->nr_hw_queues = submit_queues; sdbg_host->shost = hpnt; *((struct sdebug_host_info **)hpnt->hostdata) = sdbg_host;
Many SCSI HBAs support a hostwide tagset, whereby each command submitted to the HW from all submission queues must have a unique tag identifier. Normally this unique tag will be in the range [0, max queue), where "max queue" is the depth of each of the submission queues. Add support for this hostwide tag feature, via module parameter "host_max_queue". A non-zero value means that the feature is enabled. In this case, the submission queues are not exposed to upper layer, i.e. from blk-mq prespective, the device has a single hw queue. There are 2 reasons for this: a. it is assumed that the host can support nr_hw_queues * can_queue commands, but this is not true for hostwide tags b. for nr_hw_queues != 0, the request tag is not unique over all HW queues, and some HBA drivers want to use this tag for the hostwide tag However, like many SCSI HBA drivers today - megaraid sas being an example - the full set of HW submission queues are still used in the LLDD driver. So instead of using a complicated "reply_map" to create a per-CPU submission queue mapping like megaraid sas (as it depends on a PCI device + MSIs) - use a simple algorithm: hwq = cpu % queue count If the host max queue param is set non-zero, then the max queue depth is fixed at this value also. If and when hostwide shared tags are supported in blk-mq/scsi mid-layer, then the policy to set nr_hw_queues = 0 for hostwide tags can be revised. Signed-off-by: John Garry <john.garry@huawei.com> --- drivers/scsi/scsi_debug.c | 80 +++++++++++++++++++++++++++++++++------ 1 file changed, 68 insertions(+), 12 deletions(-) -- 2.26.2