mbox series

[RFC,0/5] scsi:scsi_debug:Add error injection for single lun

Message ID 20221109155950.3536976-1-haowenchao@huawei.com
Headers show
Series scsi:scsi_debug:Add error injection for single lun | expand

Message

Wenchao Hao Nov. 9, 2022, 3:59 p.m. UTC
The original error injection mechanism was based on scsi_host which
could not inject fault for a single SCSI device.

This patchset provides the ability to inject errors for a single
SCSI device. Now we supports inject timeout errors, queuecommand
errors, and hostbyte, driverbyte, statusbyte, and sense data for
specific SCSI Command

The first patch add an sysfs interface to add and inquiry single
device's error injection info; the second patch defined how to remove
an injection which has been added. The following 3 patches use the
injection info and generate the related error type.

Wenchao Hao (5):
  scsi:scsi_debug: Add sysfs interface to manager single devices' error inject
  scsi:scsi_debug: Add interface to remove injection which has been added
  scsi:scsi_debug: make command timeout if timeout error is injected
  scsi:scsi_debug: Return failed value for specific command's queuecommand
  scsi:scsi_debug: fail specific scsi command with result and sense data

 drivers/scsi/scsi_debug.c | 295 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 295 insertions(+)

Comments

Douglas Gilbert Nov. 13, 2022, 9:48 p.m. UTC | #1
On 2022-11-09 10:59, Wenchao Hao wrote:
> The original error injection mechanism was based on scsi_host which
> could not inject fault for a single SCSI device.
> 
> This patchset provides the ability to inject errors for a single
> SCSI device. Now we supports inject timeout errors, queuecommand
> errors, and hostbyte, driverbyte, statusbyte, and sense data for
> specific SCSI Command
> 
> The first patch add an sysfs interface to add and inquiry single
> device's error injection info; the second patch defined how to remove
> an injection which has been added. The following 3 patches use the
> injection info and generate the related error type.
> 
> Wenchao Hao (5):
>    scsi:scsi_debug: Add sysfs interface to manager single devices' error inject
>    scsi:scsi_debug: Add interface to remove injection which has been added
>    scsi:scsi_debug: make command timeout if timeout error is injected
>    scsi:scsi_debug: Return failed value for specific command's queuecommand
>    scsi:scsi_debug: fail specific scsi command with result and sense data
> 
>   drivers/scsi/scsi_debug.c | 295 ++++++++++++++++++++++++++++++++++++++
>   1 file changed, 295 insertions(+)

Hi,
This patchset seems to assume all scsi_debug devices will be disk (-like) SCSI
devices. That leaves out other device types: tapes, enclosures, WLUNs, etc.

Have you considered putting these device specific additions under:
    /sys/class/scsi_device/<hctl>/device/error_inject/
instead of
    /sys/block/sdb/device/error_inject/

?

Doug Gilbert
Damien Le Moal Nov. 14, 2022, 12:30 a.m. UTC | #2
On 11/14/22 06:48, Douglas Gilbert wrote:
> On 2022-11-09 10:59, Wenchao Hao wrote:
>> The original error injection mechanism was based on scsi_host which
>> could not inject fault for a single SCSI device.
>>
>> This patchset provides the ability to inject errors for a single
>> SCSI device. Now we supports inject timeout errors, queuecommand
>> errors, and hostbyte, driverbyte, statusbyte, and sense data for
>> specific SCSI Command
>>
>> The first patch add an sysfs interface to add and inquiry single
>> device's error injection info; the second patch defined how to remove
>> an injection which has been added. The following 3 patches use the
>> injection info and generate the related error type.
>>
>> Wenchao Hao (5):
>>    scsi:scsi_debug: Add sysfs interface to manager single devices' error inject
>>    scsi:scsi_debug: Add interface to remove injection which has been added
>>    scsi:scsi_debug: make command timeout if timeout error is injected
>>    scsi:scsi_debug: Return failed value for specific command's queuecommand
>>    scsi:scsi_debug: fail specific scsi command with result and sense data
>>
>>   drivers/scsi/scsi_debug.c | 295 ++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 295 insertions(+)
> 
> Hi,
> This patchset seems to assume all scsi_debug devices will be disk (-like) SCSI
> devices. That leaves out other device types: tapes, enclosures, WLUNs, etc.
> 
> Have you considered putting these device specific additions under:
>     /sys/class/scsi_device/<hctl>/device/error_inject/
> instead of
>     /sys/block/sdb/device/error_inject/

But these are the same, no ?
At least on my Fedora box, I see:

/sys/block/sdp/device/ being
/sys/devices/pseudo_0/adapter0/host19/target19:0:0/19:0:0:0

and /sys/class/scsi_device/19:0:0:0/device being
/sys/devices/pseudo_0/adapter0/host19/target19:0:0/19:0:0:0

> 
> ?
> 
> Doug Gilbert
> 
> 
>
Douglas Gilbert Nov. 14, 2022, 2:54 a.m. UTC | #3
On 2022-11-13 19:30, Damien Le Moal wrote:
> On 11/14/22 06:48, Douglas Gilbert wrote:
>> On 2022-11-09 10:59, Wenchao Hao wrote:
>>> The original error injection mechanism was based on scsi_host which
>>> could not inject fault for a single SCSI device.
>>>
>>> This patchset provides the ability to inject errors for a single
>>> SCSI device. Now we supports inject timeout errors, queuecommand
>>> errors, and hostbyte, driverbyte, statusbyte, and sense data for
>>> specific SCSI Command
>>>
>>> The first patch add an sysfs interface to add and inquiry single
>>> device's error injection info; the second patch defined how to remove
>>> an injection which has been added. The following 3 patches use the
>>> injection info and generate the related error type.
>>>
>>> Wenchao Hao (5):
>>>     scsi:scsi_debug: Add sysfs interface to manager single devices' error inject
>>>     scsi:scsi_debug: Add interface to remove injection which has been added
>>>     scsi:scsi_debug: make command timeout if timeout error is injected
>>>     scsi:scsi_debug: Return failed value for specific command's queuecommand
>>>     scsi:scsi_debug: fail specific scsi command with result and sense data
>>>
>>>    drivers/scsi/scsi_debug.c | 295 ++++++++++++++++++++++++++++++++++++++
>>>    1 file changed, 295 insertions(+)
>>
>> Hi,
>> This patchset seems to assume all scsi_debug devices will be disk (-like) SCSI
>> devices. That leaves out other device types: tapes, enclosures, WLUNs, etc.
>>
>> Have you considered putting these device specific additions under:
>>      /sys/class/scsi_device/<hctl>/device/error_inject/
>> instead of
>>      /sys/block/sdb/device/error_inject/
> 
> But these are the same, no ?
> At least on my Fedora box, I see:
> 
> /sys/block/sdp/device/ being
> /sys/devices/pseudo_0/adapter0/host19/target19:0:0/19:0:0:0
> 
> and /sys/class/scsi_device/19:0:0:0/device being
> /sys/devices/pseudo_0/adapter0/host19/target19:0:0/19:0:0:0

Well the patch descriptions are all in terms of /sys/block/sd<letter>/
which will not exist if scsi_debug is called like this:
   $ modprobe scsi_debug ptype=1

That creates a pseudo host with an attached (virtual) tape drive. If
the patchset works for other peripheral device types (i.e. that don't
use the sd driver) then the description should at least mention the
more general case (i.e. /sys/class/scsi_device/<hctl>/device ) IMO.

Doug Gilbert
Damien Le Moal Nov. 14, 2022, 2:55 a.m. UTC | #4
On 11/14/22 11:54, Douglas Gilbert wrote:
> On 2022-11-13 19:30, Damien Le Moal wrote:
>> On 11/14/22 06:48, Douglas Gilbert wrote:
>>> On 2022-11-09 10:59, Wenchao Hao wrote:
>>>> The original error injection mechanism was based on scsi_host which
>>>> could not inject fault for a single SCSI device.
>>>>
>>>> This patchset provides the ability to inject errors for a single
>>>> SCSI device. Now we supports inject timeout errors, queuecommand
>>>> errors, and hostbyte, driverbyte, statusbyte, and sense data for
>>>> specific SCSI Command
>>>>
>>>> The first patch add an sysfs interface to add and inquiry single
>>>> device's error injection info; the second patch defined how to remove
>>>> an injection which has been added. The following 3 patches use the
>>>> injection info and generate the related error type.
>>>>
>>>> Wenchao Hao (5):
>>>>     scsi:scsi_debug: Add sysfs interface to manager single devices' error inject
>>>>     scsi:scsi_debug: Add interface to remove injection which has been added
>>>>     scsi:scsi_debug: make command timeout if timeout error is injected
>>>>     scsi:scsi_debug: Return failed value for specific command's queuecommand
>>>>     scsi:scsi_debug: fail specific scsi command with result and sense data
>>>>
>>>>    drivers/scsi/scsi_debug.c | 295 ++++++++++++++++++++++++++++++++++++++
>>>>    1 file changed, 295 insertions(+)
>>>
>>> Hi,
>>> This patchset seems to assume all scsi_debug devices will be disk (-like) SCSI
>>> devices. That leaves out other device types: tapes, enclosures, WLUNs, etc.
>>>
>>> Have you considered putting these device specific additions under:
>>>      /sys/class/scsi_device/<hctl>/device/error_inject/
>>> instead of
>>>      /sys/block/sdb/device/error_inject/
>>
>> But these are the same, no ?
>> At least on my Fedora box, I see:
>>
>> /sys/block/sdp/device/ being
>> /sys/devices/pseudo_0/adapter0/host19/target19:0:0/19:0:0:0
>>
>> and /sys/class/scsi_device/19:0:0:0/device being
>> /sys/devices/pseudo_0/adapter0/host19/target19:0:0/19:0:0:0
> 
> Well the patch descriptions are all in terms of /sys/block/sd<letter>/
> which will not exist if scsi_debug is called like this:
>    $ modprobe scsi_debug ptype=1
> 
> That creates a pseudo host with an attached (virtual) tape drive. If
> the patchset works for other peripheral device types (i.e. that don't
> use the sd driver) then the description should at least mention the
> more general case (i.e. /sys/class/scsi_device/<hctl>/device ) IMO.

Got it.

> 
> Doug Gilbert
>
Wenchao Hao Nov. 21, 2022, 2:26 p.m. UTC | #5
On 2022/11/14 5:48, Douglas Gilbert wrote:
> On 2022-11-09 10:59, Wenchao Hao wrote:
>> The original error injection mechanism was based on scsi_host which
>> could not inject fault for a single SCSI device.
>>
>> This patchset provides the ability to inject errors for a single
>> SCSI device. Now we supports inject timeout errors, queuecommand
>> errors, and hostbyte, driverbyte, statusbyte, and sense data for
>> specific SCSI Command
>>
>> The first patch add an sysfs interface to add and inquiry single
>> device's error injection info; the second patch defined how to remove
>> an injection which has been added. The following 3 patches use the
>> injection info and generate the related error type.
>>
>> Wenchao Hao (5):
>>    scsi:scsi_debug: Add sysfs interface to manager single devices' error inject
>>    scsi:scsi_debug: Add interface to remove injection which has been added
>>    scsi:scsi_debug: make command timeout if timeout error is injected
>>    scsi:scsi_debug: Return failed value for specific command's queuecommand
>>    scsi:scsi_debug: fail specific scsi command with result and sense data
>>
>>   drivers/scsi/scsi_debug.c | 295 ++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 295 insertions(+)
> 
> Hi,
> This patchset seems to assume all scsi_debug devices will be disk (-like) SCSI
> devices. That leaves out other device types: tapes, enclosures, WLUNs, etc.
> 
> Have you considered putting these device specific additions under:
>    /sys/class/scsi_device/<hctl>/device/error_inject/
> instead of
>    /sys/block/sdb/device/error_inject/
> 
> ?
> 
> Doug Gilbert
> 

Thanks for your reply. I did not notice other device types, but the error_inject interface is
added for scsi_device, so it is available for all types. I would update the path in patch description.

Do you have other suggestions?