diff mbox series

[v4,8/9] ARM: dts: samsung: exynos4212-tab3: Add MCLK2 clock to WM1811 codec config

Message ID 20240525-midas-wm1811-gpio-jack-v4-8-f488e03bd8c7@gmail.com
State Superseded
Headers show
Series ASoC: samsung: midas-audio: Add GPIO-based headset jack detection | expand

Commit Message

Artur Weber May 25, 2024, 1:28 p.m. UTC 
In the schematics, the MCLK2 pin is shown as connected to CODEC_CLK32K,
which is derived from the same 32KHZ_PMIC clock as Bluetooth/WiFi and
GPS clocks. 32KHZ_PMIC is connected to the BTCLK pin, represented in
mainline as S2MPS11_CLK_BT.

Add the MCLK2 clock to the WM1811 codec clock property to properly
describe the hardware.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Changes in v3:
- Split out from "[PATCH v2 7/7] ARM: dts: samsung: exynos4212-tab3:
  Fix up wm1811 codec config"
---
 arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
index 8dc81112172c..47e9a230f2e8 100644
--- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
@@ -529,8 +529,9 @@  &i2c_4 {
 	wm1811: audio-codec@1a {
 		compatible = "wlf,wm1811";
 		reg = <0x1a>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
+		clocks = <&pmu_system_controller 0>,
+			 <&s5m8767_osc S2MPS11_CLK_BT>;
+		clock-names = "MCLK1", "MCLK2";
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		interrupt-parent = <&gpx3>;