diff mbox series

[v5,1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers

Message ID 20240510094034.12493-1-linux.amoon@gmail.com
State Superseded
Headers show
Series [v5,1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers | expand

Commit Message

Anand Moon May 10, 2024, 9:40 a.m. UTC
The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the calls to clk_disable_unprepare().

While at it, use dev_err_probe consistently, and use its return value
to return the error code.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v5 - No change
V4 - wrap up the error messagee within 80 char
v3 - No change
v2 - No change
---
 drivers/devfreq/exynos-bus.c | 22 +++++-----------------
 1 file changed, 5 insertions(+), 17 deletions(-)

Comments

Anand Moon June 17, 2024, 8:24 a.m. UTC | #1
Hi All,

On Fri, 10 May 2024 at 15:10, Anand Moon <linux.amoon@gmail.com> wrote:
>
> The devm_clk_get_enabled() helpers:
>     - call devm_clk_get()
>     - call clk_prepare_enable() and register what is needed in order to
>      call clk_disable_unprepare() when needed, as a managed resource.
>
> This simplifies the code and avoids the calls to clk_disable_unprepare().
>
> While at it, use dev_err_probe consistently, and use its return value
> to return the error code.
>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>

Gentle ping?

Thanks
-Anand
Chanwoo Choi June 26, 2024, 2:30 p.m. UTC | #2
24. 6. 17. 17:24에 Anand Moon 이(가) 쓴 글:
> Hi All,
> 
> On Fri, 10 May 2024 at 15:10, Anand Moon <linux.amoon@gmail.com> wrote:
>>
>> The devm_clk_get_enabled() helpers:
>>     - call devm_clk_get()
>>     - call clk_prepare_enable() and register what is needed in order to
>>      call clk_disable_unprepare() when needed, as a managed resource.
>>
>> This simplifies the code and avoids the calls to clk_disable_unprepare().
>>
>> While at it, use dev_err_probe consistently, and use its return value
>> to return the error code.
>>
>> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> 
> Gentle ping?
> 
> Thanks
> -Anand
> 

Applied it. Thanks.
I'm sorry for late reply.
Anand Moon June 29, 2024, 4:25 a.m. UTC | #3
Hi Chanwoo,

On Wed, 26 Jun 2024 at 20:00, Chanwoo Choi <chanwoo@kernel.org> wrote:
>
> 24. 6. 17. 17:24에 Anand Moon 이(가) 쓴 글:
> > Hi All,
> >
> > On Fri, 10 May 2024 at 15:10, Anand Moon <linux.amoon@gmail.com> wrote:
> >>
> >> The devm_clk_get_enabled() helpers:
> >>     - call devm_clk_get()
> >>     - call clk_prepare_enable() and register what is needed in order to
> >>      call clk_disable_unprepare() when needed, as a managed resource.
> >>
> >> This simplifies the code and avoids the calls to clk_disable_unprepare().
> >>
> >> While at it, use dev_err_probe consistently, and use its return value
> >> to return the error code.
> >>
> >> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> >
> > Gentle ping?
> >
> > Thanks
> > -Anand
> >
>
> Applied it. Thanks.
> I'm sorry for late reply.
>
Thanks & Regards
-Anand

> --
> Best Regards,
> Samsung Electronics
> Chanwoo Choi
>
diff mbox series

Patch

diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index 00118580905a..7d06c476d8e9 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -160,7 +160,6 @@  static void exynos_bus_exit(struct device *dev)
 	platform_device_unregister(bus->icc_pdev);
 
 	dev_pm_opp_of_remove_table(dev);
-	clk_disable_unprepare(bus->clk);
 	dev_pm_opp_put_regulators(bus->opp_token);
 }
 
@@ -171,7 +170,6 @@  static void exynos_bus_passive_exit(struct device *dev)
 	platform_device_unregister(bus->icc_pdev);
 
 	dev_pm_opp_of_remove_table(dev);
-	clk_disable_unprepare(bus->clk);
 }
 
 static int exynos_bus_parent_parse_of(struct device_node *np,
@@ -247,23 +245,16 @@  static int exynos_bus_parse_of(struct device_node *np,
 	int ret;
 
 	/* Get the clock to provide each bus with source clock */
-	bus->clk = devm_clk_get(dev, "bus");
-	if (IS_ERR(bus->clk)) {
-		dev_err(dev, "failed to get bus clock\n");
-		return PTR_ERR(bus->clk);
-	}
-
-	ret = clk_prepare_enable(bus->clk);
-	if (ret < 0) {
-		dev_err(dev, "failed to get enable clock\n");
-		return ret;
-	}
+	bus->clk = devm_clk_get_enabled(dev, "bus");
+	if (IS_ERR(bus->clk))
+		return dev_err_probe(dev, PTR_ERR(bus->clk),
+				"failed to get bus clock\n");
 
 	/* Get the freq and voltage from OPP table to scale the bus freq */
 	ret = dev_pm_opp_of_add_table(dev);
 	if (ret < 0) {
 		dev_err(dev, "failed to get OPP table\n");
-		goto err_clk;
+		return ret;
 	}
 
 	rate = clk_get_rate(bus->clk);
@@ -281,8 +272,6 @@  static int exynos_bus_parse_of(struct device_node *np,
 
 err_opp:
 	dev_pm_opp_of_remove_table(dev);
-err_clk:
-	clk_disable_unprepare(bus->clk);
 
 	return ret;
 }
@@ -453,7 +442,6 @@  static int exynos_bus_probe(struct platform_device *pdev)
 
 err:
 	dev_pm_opp_of_remove_table(dev);
-	clk_disable_unprepare(bus->clk);
 err_reg:
 	dev_pm_opp_put_regulators(bus->opp_token);