From patchwork Sat Aug 19 03:17:29 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sam Protsenko X-Patchwork-Id: 715126 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id AC1D3EE49AF for ; Sat, 19 Aug 2023 03:18:30 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S244925AbjHSDR6 (ORCPT ); Fri, 18 Aug 2023 23:17:58 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:32868 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S244808AbjHSDRk (ORCPT ); Fri, 18 Aug 2023 23:17:40 -0400 Received: from mail-oa1-x34.google.com (mail-oa1-x34.google.com [IPv6:2001:4860:4864:20::34]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B51CF422B for ; Fri, 18 Aug 2023 20:17:38 -0700 (PDT) Received: by mail-oa1-x34.google.com with SMTP id 586e51a60fabf-1c4d8eaa8ebso980070fac.0 for ; Fri, 18 Aug 2023 20:17:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1692415058; x=1693019858; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=+DQwNNrrtVCT1lLuabGTe5r6Le72ZgleU8XG8wqlJaU=; b=KZnsI2frS8f19EqyRQwavdJnykidAx+LH2FzPONwEGalZsPbjh8DDMo6++Bw8p/kWb JFunValfCFYRcWIsU4vandkZU7eWr0blqGFSQR8kJJi7LTusS8JkQQH8/N/MGy8P3FDC 1se/QTLNn7fXOEsrIQc6St1a92WXH54mgQnjTzjzwBmFXD5USVK6ghGkDUhod6hiCnK3 u++iM22rFYepHpqUMgSx44AevgdbcrhG7gxsyZErip+/NeNCbgCCvLokMOtCOGoRquy8 E3iixOKDXW4y1S/IEk7hI3a7LYelHPozIIGne2EU0nQJVQXGpXmEf3bhMubPVLm6r62I gbDA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1692415058; x=1693019858; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=+DQwNNrrtVCT1lLuabGTe5r6Le72ZgleU8XG8wqlJaU=; b=JyI1zF23xZBRKmGaMejQAcxAmbShAmvAgYDAb8sX+2nUNW97O46JJb/3+Q7DNzBvbi UCQpoqzB5ss5YrkmqlMsoHki5dGPBAmdGqY7JTRRQ3+ry6hKPi1Dm9pJouuloXSlCUvx IonCw8z2f6phfo6czVkQo85/5boZ3B3pM5euBBrrMV0NmroG33h4JN66Tkp5io2fGePn ZXTvalStDnRAohk7Tzy1GyOllg/px4EJ+zyLZkRYq4cOZZqjosJgoKnngbzVCZEkCYt2 8zOaj4Z+fEY4yh3iCOcALvTFRxFK1WApO7SgMaPX75I9TM8COxYsSkhdVjomx6j/WJjm vVHQ== X-Gm-Message-State: AOJu0YxmjTbRWd8CNCct75tbPIHCIhVkbBSDYyMLyTuzghN9hXfQVm/4 r5dEbML7zilkxJgJwXW97CI0YA== X-Google-Smtp-Source: AGHT+IG9+tvpUlnk8cAJd8EALh9FR9Ev77lqz1NyZ7whINiZTja6Zelg0JAusKenuNC7JUynVd3GDQ== X-Received: by 2002:a05:6870:2188:b0:19f:6711:8e0a with SMTP id l8-20020a056870218800b0019f67118e0amr1165180oae.32.1692415058070; Fri, 18 Aug 2023 20:17:38 -0700 (PDT) Received: from localhost ([136.49.140.41]) by smtp.gmail.com with ESMTPSA id r2-20020a056870878200b001c4b473581fsm1725223oam.12.2023.08.18.20.17.37 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 18 Aug 2023 20:17:37 -0700 (PDT) From: Sam Protsenko To: Krzysztof Kozlowski , Rob Herring , Thinh Nguyen Cc: JaeHun Jung , Marek Szyprowski , Sylwester Nawrocki , Conor Dooley , Vinod Koul , Kishon Vijay Abraham I , Greg Kroah-Hartman , Alim Akhtar , Marc Kleine-Budde , Heiko Stuebner , linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org Subject: [PATCH 6/8] phy: exynos5-usbdrd: Add Exynos850 support Date: Fri, 18 Aug 2023 22:17:29 -0500 Message-Id: <20230819031731.22618-7-semen.protsenko@linaro.org> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20230819031731.22618-1-semen.protsenko@linaro.org> References: <20230819031731.22618-1-semen.protsenko@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-samsung-soc@vger.kernel.org Implement Exynos850 USB 2.0 DRD PHY controller support. Exynos850 has quite a different PHY controller than Exynos5 compatible controllers, but it's still possible to implement it on top of existing exynos5-usbdrd driver infrastructure. Only UTMI+ (USB 2.0) PHY interface is implemented, as Exynos850 doesn't support USB 3.0. Only two clocks are used for this controller: - phy: bus clock, used for PHY registers access - ref: PHY reference clock (OSCCLK) Signed-off-by: Sam Protsenko Reviewed-by: Krzysztof Kozlowski --- drivers/phy/samsung/phy-exynos5-usbdrd.c | 169 +++++++++++++++++++++++ 1 file changed, 169 insertions(+) diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c index 41508db87b9b..3f310b28bfff 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -145,6 +145,34 @@ #define LANE0_TX_DEBUG_RXDET_MEAS_TIME_62M5 (0x20 << 4) #define LANE0_TX_DEBUG_RXDET_MEAS_TIME_96M_100M (0x40 << 4) +/* Exynos850: USB DRD PHY registers */ +#define EXYNOS850_DRD_LINKCTRL 0x04 +#define LINKCTRL_BUS_FILTER_BYPASS(_x) ((_x) << 4) +#define LINKCTRL_FORCE_QACT BIT(8) + +#define EXYNOS850_DRD_CLKRST 0x20 +#define CLKRST_LINK_SW_RST BIT(0) +#define CLKRST_PORT_RST BIT(1) +#define CLKRST_PHY_SW_RST BIT(3) + +#define EXYNOS850_DRD_UTMI 0x50 +#define UTMI_FORCE_SLEEP BIT(0) +#define UTMI_FORCE_SUSPEND BIT(1) +#define UTMI_DM_PULLDOWN BIT(2) +#define UTMI_DP_PULLDOWN BIT(3) +#define UTMI_FORCE_BVALID BIT(4) +#define UTMI_FORCE_VBUSVALID BIT(5) + +#define EXYNOS850_DRD_HSP 0x54 +#define HSP_COMMONONN BIT(8) +#define HSP_EN_UTMISUSPEND BIT(9) +#define HSP_VBUSVLDEXT BIT(12) +#define HSP_VBUSVLDEXTSEL BIT(13) +#define HSP_FSV_OUT_EN BIT(24) + +#define EXYNOS850_DRD_HSP_TEST 0x5c +#define HSP_TEST_SIDDQ BIT(24) + #define KHZ 1000 #define MHZ (KHZ * KHZ) @@ -716,6 +744,129 @@ static const struct phy_ops exynos5_usbdrd_phy_ops = { .owner = THIS_MODULE, }; +static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + /* + * Disable HWACG (hardware auto clock gating control). This will force + * QACTIVE signal in Q-Channel interface to HIGH level, to make sure + * the PHY clock is not gated by the hardware. + */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg |= LINKCTRL_FORCE_QACT; + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + /* Start PHY Reset (POR=high) */ + reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + reg |= CLKRST_PHY_SW_RST; + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + + /* Enable UTMI+ */ + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg &= ~(UTMI_FORCE_SUSPEND | UTMI_FORCE_SLEEP | UTMI_DP_PULLDOWN | + UTMI_DM_PULLDOWN); + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + /* Set PHY clock and control HS PHY */ + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg |= HSP_EN_UTMISUSPEND | HSP_COMMONONN; + writel(reg, regs_base + EXYNOS850_DRD_HSP); + + /* Set VBUS Valid and D+ pull-up control by VBUS pad usage */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg |= LINKCTRL_BUS_FILTER_BYPASS(0xf); + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg |= UTMI_FORCE_BVALID | UTMI_FORCE_VBUSVALID; + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg |= HSP_VBUSVLDEXT | HSP_VBUSVLDEXTSEL; + writel(reg, regs_base + EXYNOS850_DRD_HSP); + + /* Power up PHY analog blocks */ + reg = readl(regs_base + EXYNOS850_DRD_HSP_TEST); + reg &= ~HSP_TEST_SIDDQ; + writel(reg, regs_base + EXYNOS850_DRD_HSP_TEST); + + /* Finish PHY reset (POR=low) */ + udelay(10); /* required before doing POR=low */ + reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + reg &= ~(CLKRST_PHY_SW_RST | CLKRST_PORT_RST); + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + udelay(75); /* required after POR=low for guaranteed PHY clock */ + + /* Disable single ended signal out */ + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg &= ~HSP_FSV_OUT_EN; + writel(reg, regs_base + EXYNOS850_DRD_HSP); +} + +static int exynos850_usbdrd_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + ret = clk_prepare_enable(phy_drd->clk); + if (ret) + return ret; + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + clk_disable_unprepare(phy_drd->clk); + + return 0; +} + +static int exynos850_usbdrd_phy_exit(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + int ret; + + ret = clk_prepare_enable(phy_drd->clk); + if (ret) + return ret; + + /* Set PHY clock and control HS PHY */ + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg &= ~(UTMI_DP_PULLDOWN | UTMI_DM_PULLDOWN); + reg |= UTMI_FORCE_SUSPEND | UTMI_FORCE_SLEEP; + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + /* Power down PHY analog blocks */ + reg = readl(regs_base + EXYNOS850_DRD_HSP_TEST); + reg |= HSP_TEST_SIDDQ; + writel(reg, regs_base + EXYNOS850_DRD_HSP_TEST); + + /* Link reset */ + reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + reg |= CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + udelay(10); /* required before doing POR=low */ + reg &= ~CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + + clk_disable_unprepare(phy_drd->clk); + + return 0; +} + +static const struct phy_ops exynos850_usbdrd_phy_ops = { + .init = exynos850_usbdrd_phy_init, + .exit = exynos850_usbdrd_phy_exit, + .power_on = exynos5_usbdrd_phy_power_on, + .power_off = exynos5_usbdrd_phy_power_off, + .owner = THIS_MODULE, +}; + static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd) { unsigned long ref_rate; @@ -782,6 +933,14 @@ static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = { }, }; +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos850[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos850_usbdrd_utmi_init, + }, +}; + static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = { .phy_cfg = phy_cfg_exynos5, .phy_ops = &exynos5_usbdrd_phy_ops, @@ -812,6 +971,13 @@ static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = { .has_common_clk_gate = false, }; +static const struct exynos5_usbdrd_phy_drvdata exynos850_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos850, + .phy_ops = &exynos850_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .has_common_clk_gate = true, +}; + static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { { .compatible = "samsung,exynos5250-usbdrd-phy", @@ -825,6 +991,9 @@ static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { }, { .compatible = "samsung,exynos7-usbdrd-phy", .data = &exynos7_usbdrd_phy + }, { + .compatible = "samsung,exynos850-usbdrd-phy", + .data = &exynos850_usbdrd_phy }, { }, };