@@ -260,16 +260,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tzd = data->tzd;
- const struct thermal_trip * const trips =
- of_thermal_get_trip_points(tzd);
unsigned int status;
- int ret = 0, temp, hyst;
-
- if (!trips) {
- dev_err(&pdev->dev,
- "Cannot get trip points from device tree!\n");
- return -ENODEV;
- }
+ int ret = 0, temp;
if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */
ret = tzd->ops->get_crit_temp(tzd, &temp);
@@ -303,19 +295,16 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
/* Write temperature code for rising and falling threshold */
for (i = 0; i < ntrips; i++) {
- /* Write temperature code for rising threshold */
- ret = tzd->ops->get_trip_temp(tzd, i, &temp);
- if (ret)
- goto err;
- temp /= MCELSIUS;
- data->tmu_set_trip_temp(data, i, temp);
- /* Write temperature code for falling threshold */
- ret = tzd->ops->get_trip_hyst(tzd, i, &hyst);
+ struct thermal_trip trip;
+
+ ret = thermal_zone_get_trip(tzd, i, &trip);
if (ret)
goto err;
- hyst /= MCELSIUS;
- data->tmu_set_trip_hyst(data, i, temp, hyst);
+
+ data->tmu_set_trip_temp(data, i, trip.temperature / MCELSIUS);
+ data->tmu_set_trip_hyst(data, i, trip.temperature / MCELSIUS,
+ trip.hysteresis / MCELSIUS);
}
data->tmu_clear_irqs(data);
@@ -360,21 +349,23 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
}
static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
- int trip, u8 temp)
+ int trip_id, u8 temp)
{
- const struct thermal_trip * const trips =
- of_thermal_get_trip_points(data->tzd);
+ struct thermal_trip trip;
u8 ref, th_code;
- ref = trips[0].temperature / MCELSIUS;
+ if (thermal_zone_get_trip(data->tzd, 0, &trip))
+ return;
- if (trip == 0) {
+ ref = trip.temperature / MCELSIUS;
+
+ if (trip_id == 0) {
th_code = temp_to_code(data, ref);
writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
}
temp -= ref;
- writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4);
+ writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip_id * 4);
}
/* failing thresholds are not supported on Exynos4210 */
The thermal framework gives the possibility to register the trip points with the thermal zone. When that is done, no get_trip_* ops are needed and they can be removed. Convert ops content logic into generic trip points and register them with the thermal zone. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> --- drivers/thermal/samsung/exynos_tmu.c | 41 +++++++++++----------------- 1 file changed, 16 insertions(+), 25 deletions(-)