diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
new file mode 100644
index 000000000000..f73348c54748
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-gpio-bank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - gpio bank
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  GPIO bank description for Samsung S3C/S5P/Exynos SoC pin controller.
+
+  See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+  additional information and example.
+
+properties:
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#interrupt-cells':
+    description:
+      For GPIO banks supporting external GPIO interrupts or external wake-up
+      interrupts.
+    const: 2
+
+  interrupt-controller:
+    description:
+      For GPIO banks supporting external GPIO interrupts or external wake-up
+      interrupts.
+
+  interrupts:
+    description:
+      For GPIO banks supporting direct external wake-up interrupts (without
+      multiplexing).  Number of interrupts must match number of wake-up capable
+      pins of this bank.
+    minItems: 1
+    maxItems: 8
+
+required:
+  - '#gpio-cells'
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
new file mode 100644
index 000000000000..c71939ac8b63
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-pins-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - pins configuration
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  Pins configuration for Samsung S3C/S5P/Exynos SoC pin controller.
+
+  The values used for config properties should be derived from the hardware
+  manual and these values are programmed as-is into the pin pull up/down and
+  driver strength register of the pin-controller.
+  See also include/dt-bindings/pinctrl/samsung.h with useful constants.
+
+  See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+  additional information and example.
+
+properties:
+  samsung,pins:
+    description: |
+      List of pins to configure. For initial and sleep states, the maximum
+      number is one pin. In other cases there is no upper limit.
+
+      The pins should use lowercase names matching hardware manual, e.g. for
+      GPA0 bank: gpa0-0, gpa0-1, gpa0-2.
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  samsung,pin-function:
+    description: |
+      The pin function selection that should be applied on the pins listed in the
+      child node is specified using the "samsung,pin-function" property. The value
+      of this property that should be applied to each of the pins listed in the
+      "samsung,pins" property should be picked from the hardware manual of the SoC
+      for the specified pin group. This property is optional in the child node if
+      no specific function selection is desired for the pins listed in the child
+      node. The value of this property is used as-is to program the pin-controller
+      function selector register of the pin-bank.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  samsung,pin-drv:
+    description: Drive strength configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  samsung,pin-pud:
+    description: Pull up/down configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  samsung,pin-val:
+    description: Initial value of pin output buffer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  samsung,pin-con-pdn:
+    description: Function in power down mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  samsung,pin-pud-pdn:
+    description: Pull up/down configuration in power down mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+required:
+  - samsung,pins
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
new file mode 100644
index 000000000000..6b684a53119b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - wake-up interrupt controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  External wake-up interrupts for Samsung S3C/S5P/Exynos SoC pin controller.
+  Only one pin-controller device node can include external wake-up interrupts
+  child node (in other words, only one External wake-up interrupts
+  pin-controller is supported).
+
+  See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2410-wakeup-eint
+      - samsung,s3c2412-wakeup-eint
+      - samsung,s3c64xx-wakeup-eint
+      - samsung,s5pv210-wakeup-eint
+      - samsung,exynos4210-wakeup-eint
+      - samsung,exynos7-wakeup-eint
+
+  interrupts:
+    description:
+      Interrupt used by multiplexed external wake-up interrupts.
+    minItems: 1
+    maxItems: 6
+
+required:
+  - compatible
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-wakeup-eint
+              - samsung,s3c2412-wakeup-eint
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s3c64xx-wakeup-eint
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s5pv210-wakeup-eint
+              - samsung,exynos4210-wakeup-eint
+              - samsung,exynos7-wakeup-eint
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
new file mode 100644
index 000000000000..28f0851d07bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
@@ -0,0 +1,392 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  Pin group settings (like drive strength, pull up/down) are available as
+  macros in include/dt-bindings/pinctrl/samsung.h.
+
+  All the pin controller nodes should be represented in the aliases node using
+  the following format 'pinctrl{n}' where n is a unique number for the alias.
+
+  The controller supports three types of interrupts::
+   - External GPIO interrupts (see interrupts property in pin controller node);
+
+   - External wake-up interrupts - multiplexed (capable of waking up the system
+     see interrupts property in external wake-up interrupt controller node -
+     samsung,pinctrl-wakeup-interrupt.yaml);
+
+   - External wake-up interrupts - direct (capable of waking up the system, see
+     interrupts property in every bank of pin controller with external wake-up
+     interrupt controller - samsung,pinctrl-gpio-bank.yaml).
+
+properties:
+  $nodename:
+    pattern: "^pinctrl(@.*)?"
+
+  compatible:
+    enum:
+      - samsung,s3c2412-pinctrl
+      - samsung,s3c2416-pinctrl
+      - samsung,s3c2440-pinctrl
+      - samsung,s3c2450-pinctrl
+      - samsung,s3c64xx-pinctrl
+      - samsung,s5pv210-pinctrl
+      - samsung,exynos3250-pinctrl
+      - samsung,exynos4210-pinctrl
+      - samsung,exynos4x12-pinctrl
+      - samsung,exynos5250-pinctrl
+      - samsung,exynos5260-pinctrl
+      - samsung,exynos5410-pinctrl
+      - samsung,exynos5420-pinctrl
+      - samsung,exynos5433-pinctrl
+      - samsung,exynos7-pinctrl
+      - samsung,exynos7885-pinctrl
+      - samsung,exynos850-pinctrl
+      - samsung,exynosautov9-pinctrl
+
+  interrupts:
+    description:
+      Required for GPIO banks supporting external GPIO interrupts.
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    description:
+      Second base address of the pin controller if the specific registers of
+      the pin controller are separated into the different base address.
+      Only certain banks of certain pin controller might need it.
+    minItems: 1
+    maxItems: 2
+
+  wakeup-interrupt-controller:
+    $ref: samsung,pinctrl-wakeup-interrupt.yaml
+
+patternProperties:
+  "^[a-z]+[0-9]*-gpio-bank$":
+    description:
+      Pin banks of the controller are represented by child nodes of the
+      controller node. Bank name is taken from name of the node.
+    $ref: samsung,pinctrl-gpio-bank.yaml
+
+  "^[a-z0-9-]+-pins$":
+    oneOf:
+      - $ref: samsung,pinctrl-pins-cfg.yaml
+        required:
+          - samsung,pins
+      - type: object
+        patternProperties:
+          "^[a-z0-9-]+-pins$":
+            $ref: samsung,pinctrl-pins-cfg.yaml
+
+        additionalProperties: false
+
+  "^(initial|sleep)-state$":
+    patternProperties:
+      "^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$":
+        $ref: samsung,pinctrl-pins-cfg.yaml
+
+        properties:
+          samsung,pins:
+            description: See samsung,pinctrl-pins-cfg.yaml
+            $ref: /schemas/types.yaml#/definitions/string-array
+            maxItems: 1
+
+        required:
+          - samsung,pins
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-pinctrl
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+    else:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/samsung.h>
+
+    pinctrl@7f008000 {
+        compatible = "samsung,s3c64xx-pinctrl";
+        reg = <0x7f008000 0x1000>;
+        interrupt-parent = <&vic1>;
+        interrupts = <21>;
+
+        wakeup-interrupt-controller {
+            compatible = "samsung,s3c64xx-wakeup-eint";
+            interrupts-extended = <&vic0 0>,
+                                  <&vic0 1>,
+                                  <&vic1 0>,
+                                  <&vic1 1>;
+        };
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpa-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        uart0-data-pins {
+            samsung,pins = "gpa-0", "gpa-1";
+            samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+            samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+        };
+
+        // ...
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/samsung.h>
+
+    pinctrl@11400000 {
+        compatible = "samsung,exynos4210-pinctrl";
+        reg = <0x11400000 0x1000>;
+        interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&sleep0>;
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpa0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        uart0-data-pins {
+            samsung,pins = "gpa0-0", "gpa0-1";
+            samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+            samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+            samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+        };
+
+        // ...
+
+        sleep0: sleep-state {
+            gpa0-0-pin {
+                samsung,pins = "gpa0-0";
+                samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+                samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+            };
+
+            gpa0-1-pin {
+                samsung,pins = "gpa0-1";
+                samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
+                samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+            };
+
+            // ...
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/samsung.h>
+
+    pinctrl@11000000 {
+        compatible = "samsung,exynos4210-pinctrl";
+        reg = <0x11000000 0x1000>;
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+        wakeup-interrupt-controller {
+            compatible = "samsung,exynos4210-wakeup-eint";
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpj0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        /* Pin bank without external interrupts */
+        gpy0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+
+        /* Pin bank with external direct wake-up interrupts */
+        gpx0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            interrupt-controller;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        sd0-clk-pins {
+            samsung,pins = "gpk0-0";
+            samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+            samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+            samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+        };
+
+        sd4-bus-width8-pins {
+            part-1-pins {
+                samsung,pins = "gpk0-3", "gpk0-4",
+                               "gpk0-5", "gpk0-6";
+                samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+                samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+                samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+            };
+
+            part-2-pins {
+                samsung,pins = "gpk1-3", "gpk1-4",
+                               "gpk1-5", "gpk1-6";
+                samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+                samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+                samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+            };
+        };
+
+        // ...
+
+        otg-gp-pins {
+            samsung,pins = "gpx3-3";
+            samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+            samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+            samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+            samsung,pin-val = <0>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/samsung.h>
+
+    pinctrl@10580000 {
+        compatible = "samsung,exynos5433-pinctrl";
+        reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&initial_alive>;
+
+        wakeup-interrupt-controller {
+            compatible = "samsung,exynos7-wakeup-eint";
+            interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        /* Pin bank with external direct wake-up interrupts */
+        gpa0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            interrupt-controller;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        te-irq-pins {
+            samsung,pins = "gpf1-3";
+            samsung,pin-function = <0xf>;
+        };
+
+        // ..
+
+        initial_alive: initial-state {
+            gpa0-0-pin {
+                samsung,pins = "gpa0-0";
+                samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+                samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+                samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+            };
+
+            // ...
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/samsung.h>
+
+    pinctrl@114b0000 {
+        compatible = "samsung,exynos5433-pinctrl";
+        reg = <0x114b0000 0x1000>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_aud>;
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpz0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        i2s0-bus-pins {
+            samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
+                           "gpz0-4", "gpz0-5", "gpz0-6";
+            samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+            samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+            samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+        };
+
+        // ...
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
deleted file mode 100644
index 9e70edceb21b..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ /dev/null
@@ -1,383 +0,0 @@
-Samsung GPIO and Pin Mux/Config controller
-
-Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware
-controller. It controls the input/output settings on the available pads/pins
-and also provides ability to multiplex and configure the output of various
-on-chip controllers onto these pads.
-
-Required Properties:
-- compatible: should be one of the following.
-  - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller,
-  - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller,
-  - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller,
-  - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller,
-  - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
-  - "samsung,s5pv210-pinctrl": for S5PV210-compatible pin-controller,
-  - "samsung,exynos3250-pinctrl": for Exynos3250 compatible pin-controller.
-  - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
-  - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
-  - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
-  - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
-  - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
-  - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
-  - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller.
-  - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
-  - "samsung,exynos7885-pinctrl": for Exynos7885 compatible pin-controller.
-  - "samsung,exynos850-pinctrl": for Exynos850 compatible pin-controller.
-  - "samsung,exynosautov9-pinctrl": for ExynosAutov9 compatible pin-controller.
-
-- reg: Base address of the pin controller hardware module and length of
-  the address space it occupies.
-
-  - reg: Second base address of the pin controller if the specific registers
-  of the pin controller are separated into the different base address.
-
-	Eg: GPF[1-5] of Exynos5433 are separated into the two base address.
-	- First base address is for GPAx and GPF[1-5] external interrupt
-	  registers.
-	- Second base address is for GPF[1-5] pinctrl registers.
-
-	pinctrl_0: pinctrl@10580000 {
-		compatible = "samsung,exynos5433-pinctrl";
-		reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,exynos7-wakeup-eint";
-			interrupts = <0 16 0>;
-		};
-	};
-
-- Pin banks as child nodes: Pin banks of the controller are represented by child
-  nodes of the controller node. Bank name is taken from name of the node. Each
-  bank node must contain following properties:
-
-  - gpio-controller: identifies the node as a gpio controller and pin bank.
-  - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
-    binding is used, the amount of cells must be specified as 2. See the below
-    mentioned gpio binding representation for description of particular cells.
-
-	Eg: <&gpx2 6 0>
-	<[phandle of the gpio controller node]
-	[pin number within the gpio controller]
-	[flags]>
-
-	Values for gpio specifier:
-	- Pin number: is a value between 0 to 7.
-	- Flags: 0 - Active High
-		 1 - Active Low
-
-- Pin mux/config groups as child nodes: The pin mux (selecting pin function
-  mode) and pin config (pull up/down, driver strength) settings are represented
-  as child nodes of the pin-controller node. There should be at least one
-  child node and there is no limit on the count of these child nodes. It is
-  also possible for a child node to consist of several further child nodes
-  to allow grouping multiple pinctrl groups into one. The format of second
-  level child nodes is exactly the same as for first level ones and is
-  described below.
-
-  The child node should contain a list of pin(s) on which a particular pin
-  function selection or pin configuration (or both) have to applied. This
-  list of pins is specified using the property name "samsung,pins". There
-  should be at least one pin specified for this property and there is no upper
-  limit on the count of pins that can be specified. The pins are specified
-  using pin names which are derived from the hardware manual of the SoC. As
-  an example, the pins in GPA0 bank of the pin controller can be represented
-  as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case.
-  The format of the pin names should be (as per the hardware manual)
-  "[pin bank name]-[pin number within the bank]".
-
-  The pin function selection that should be applied on the pins listed in the
-  child node is specified using the "samsung,pin-function" property. The value
-  of this property that should be applied to each of the pins listed in the
-  "samsung,pins" property should be picked from the hardware manual of the SoC
-  for the specified pin group. This property is optional in the child node if
-  no specific function selection is desired for the pins listed in the child
-  node. The value of this property is used as-is to program the pin-controller
-  function selector register of the pin-bank.
-
-  The child node can also optionally specify one or more of the pin
-  configuration that should be applied on all the pins listed in the
-  "samsung,pins" property of the child node. The following pin configuration
-  properties are supported.
-
-  - samsung,pin-val: Initial value of pin output buffer.
-  - samsung,pin-pud: Pull up/down configuration.
-  - samsung,pin-drv: Drive strength configuration.
-  - samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
-  - samsung,pin-drv-pdn: Drive strength configuration in power down mode.
-
-  The values specified by these config properties should be derived from the
-  hardware manual and these values are programmed as-is into the pin
-  pull up/down and driver strength register of the pin-controller.
-
-  Note: A child should include at least a pin function selection property or
-  pin configuration property (one or more) or both.
-
-  The client nodes that require a particular pin function selection and/or
-  pin configuration should use the bindings listed in the "pinctrl-bindings.txt"
-  file.
-
-External GPIO and Wakeup Interrupts:
-
-The controller supports two types of external interrupts over gpio. The first
-is the external gpio interrupt and second is the external wakeup interrupts.
-The difference between the two is that the external wakeup interrupts can be
-used as system wakeup events.
-
-A. External GPIO Interrupts: For supporting external gpio interrupts, the
-   following properties should be specified in the pin-controller device node.
-
-   - interrupts: interrupt specifier for the controller. The format and value of
-     the interrupt specifier depends on the interrupt parent for the controller.
-
-   In addition, following properties must be present in node of every bank
-   of pins supporting GPIO interrupts:
-
-   - interrupt-controller: identifies the controller node as interrupt-parent.
-   - #interrupt-cells: the value of this property should be 2.
-     - First Cell: represents the external gpio interrupt number local to the
-       external gpio interrupt space of the controller.
-     - Second Cell: flags to identify the type of the interrupt
-       - 1 = rising edge triggered
-       - 2 = falling edge triggered
-       - 3 = rising and falling edge triggered
-       - 4 = high level triggered
-       - 8 = low level triggered
-
-B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
-   child node representing the external wakeup interrupt controller should be
-   included in the pin-controller device node.
-
-   Only one pin-controller device node can include external wakeup interrupts
-   child node (in other words, only one External Wakeup Interrupts
-   pin-controller is supported).
-
-   This child node should include following properties:
-
-   - compatible: identifies the type of the external wakeup interrupt controller
-     The possible values are:
-     - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
-     - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung S3C2412 and S3C2413 SoCs,
-     - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung S3C64xx SoCs,
-     - samsung,s5pv210-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung S5Pv210 SoCs,
-     - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs.
-     - samsung,exynos7-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung Exynos7 SoC.
-   - interrupts: interrupt used by multiplexed wakeup interrupts.
-
-   In addition, following properties must be present in node of every bank
-   of pins supporting wake-up interrupts:
-
-   - interrupt-controller: identifies the node as interrupt-parent.
-   - #interrupt-cells: the value of this property should be 2
-     - First Cell: represents the external wakeup interrupt number local to
-       the external wakeup interrupt space of the controller.
-     - Second Cell: flags to identify the type of the interrupt
-       - 1 = rising edge triggered
-       - 2 = falling edge triggered
-       - 3 = rising and falling edge triggered
-       - 4 = high level triggered
-       - 8 = low level triggered
-
-   Node of every bank of pins supporting direct wake-up interrupts (without
-   multiplexing) must contain following properties:
-
-   - interrupts: interrupts of the interrupt parent which are used for external
-     wakeup interrupts from pins of the bank, must contain interrupts for all
-     pins of the bank.
-
-Aliases:
-
-All the pin controller nodes should be represented in the aliases node using
-the following format 'pinctrl{n}' where n is a unique number for the alias.
-
-Aliases for controllers compatible with "samsung,exynos7-pinctrl":
-- pinctrl0: pin controller of ALIVE block,
-- pinctrl1: pin controller of BUS0 block,
-- pinctrl2: pin controller of NFC block,
-- pinctrl3: pin controller of TOUCH block,
-- pinctrl4: pin controller of FF block,
-- pinctrl5: pin controller of ESE block,
-- pinctrl6: pin controller of FSYS0 block,
-- pinctrl7: pin controller of FSYS1 block,
-- pinctrl8: pin controller of BUS1 block,
-- pinctrl9: pin controller of AUDIO block,
-
-Example: A pin-controller node with pin banks:
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
-
-		/* ... */
-
-		/* Pin bank without external interrupts */
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		/* ... */
-
-		/* Pin bank with external GPIO or muxed wake-up interrupts */
-		gpj0: gpj0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		/* ... */
-
-		/* Pin bank with external direct wake-up interrupts */
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
-			#interrupt-cells = <2>;
-		};
-
-		/* ... */
-	};
-
-Example 1: A pin-controller node with pin groups.
-
-	#include <dt-bindings/pinctrl/samsung.h>
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
-
-		/* ... */
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		sd4_bus8: sd4-bus-width8 {
-			part-1 {
-				samsung,pins = "gpk0-3", "gpk0-4",
-						"gpk0-5", "gpk0-6";
-				samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-				samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-				samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-			};
-			part-2 {
-				samsung,pins = "gpk1-3", "gpk1-4",
-						"gpk1-5", "gpk1-6";
-				samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-				samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-				samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-			};
-		};
-	};
-
-Example 2: A pin-controller node with external wakeup interrupt controller node.
-
-	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>
-
-		/* ... */
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
-		};
-	};
-
-Example 3: A uart client node that supports 'default' and 'flow-control' states.
-
-	uart@13800000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13800000 0x100>;
-		interrupts = <0 52 0>;
-		pinctrl-names = "default", "flow-control;
-		pinctrl-0 = <&uart0_data>;
-		pinctrl-1 = <&uart0_data>, <&uart0_fctl>;
-	};
-
-Example 4: Set up the default pin state for uart controller.
-
-	static int s3c24xx_serial_probe(struct platform_device *pdev) {
-		struct pinctrl *pinctrl;
-
-		/* ... */
-
-		pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	}
-
-Example 5: A display port client node that supports 'default' pinctrl state
-	   and gpio binding.
-
-	display-port-controller {
-		/* ... */
-
-		samsung,hpd-gpio = <&gpx2 6 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-	};
-
-Example 6: Request the gpio for display port controller
-
-	static int exynos_dp_probe(struct platform_device *pdev)
-	{
-		int hpd_gpio, ret;
-		struct device *dev = &pdev->dev;
-		struct device_node *dp_node = dev->of_node;
-
-		/* ... */
-
-		hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0);
-
-		/* ... */
-
-		ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN,
-					    "hpd_gpio");
-		/* ... */
-	}
diff --git a/MAINTAINERS b/MAINTAINERS
index 5ea5655a29c3..33005c10e956 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15242,7 +15242,7 @@ L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
 Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
-F:	Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+F:	Documentation/devicetree/bindings/pinctrl/samsung,pinctrl*yaml
 F:	drivers/pinctrl/samsung/
 F:	include/dt-bindings/pinctrl/samsung.h
 
