| Message ID | 20220110152714.58220-1-jagan@amarulasolutions.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/2] arm64: dts: exynos: Link DSI panel at port@1 for TM2 board | expand |
+CC: dri-devel On 10.01.2022 16:27, Jagan Teki wrote: > TM2 board DSI pipeline has input from MIC and output to > s6e3ha2 panel. > > The existing pipeline has child nodes of ports, panel and > MIC is remote-endpoint reference of port@0 of ports. > > Adding panel as another child node to DSI is unconventional > as pipeline has ports child. However it can be true if MIC > is added inside port node like this. > > dsi { > compatible = "samsung,exynos5433-mipi-dsi"; > #address-cells = <1>; > #size-cells = <0>; > > port { > dsi_to_mic: endpoint { > remote-endpoint = <&mic_to_dsi>; > }; > }; > > panel@0 { > compatible = "samsung,s6e3hf2"; > reg = <0>; > vdd3-supply = <&ldo27_reg>; > vci-supply = <&ldo28_reg>; > reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; > enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; > }; > }; > > The above pipeline is proper but it requires the DSI input MIC > pipeline to update. > > This patch is trying to add panel at port@1 so-that the entire > pipeline before to panel output is untouched. > > Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > index aca01709fd29..e13210c8d7e0 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > @@ -53,6 +53,16 @@ &cmu_disp { > }; > > &dsi { > + ports { > + port@1 { > + reg = <1>; > + > + dsi_out_panel: endpoint { > + remote-endpoint = <&dsi_in_panel>; > + }; > + }; > + }; > + > panel@0 { > compatible = "samsung,s6e3ha2"; > reg = <0>; > @@ -60,6 +70,12 @@ panel@0 { > vci-supply = <&ldo28_reg>; > reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; > enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; > + > + port { > + dsi_in_panel: endpoint { > + remote-endpoint = <&dsi_out_panel>; > + }; > + }; As I already wrote in Exynos thread, DSI host has already parent-child relation with the panel - DSI host knows well who is connected to it. Adding another links between them is redundant and has no value added. I have already answered in Exynos thread[1] how could you deal with the issue, you have. [1]: https://lore.kernel.org/dri-devel/e541c52b-9751-933b-5eac-783dd0ed9056@intel.com/ Regards Andrzej > }; > }; >
Hi Andrzej, On Tue, Jan 11, 2022 at 2:05 PM Andrzej Hajda <andrzej.hajda@intel.com> wrote: > > +CC: dri-devel > > On 10.01.2022 16:27, Jagan Teki wrote: > > TM2 board DSI pipeline has input from MIC and output to > > s6e3ha2 panel. > > > > The existing pipeline has child nodes of ports, panel and > > MIC is remote-endpoint reference of port@0 of ports. > > > > Adding panel as another child node to DSI is unconventional > > as pipeline has ports child. However it can be true if MIC > > is added inside port node like this. > > > > dsi { > > compatible = "samsung,exynos5433-mipi-dsi"; > > #address-cells = <1>; > > #size-cells = <0>; > > > > port { > > dsi_to_mic: endpoint { > > remote-endpoint = <&mic_to_dsi>; > > }; > > }; > > > > panel@0 { > > compatible = "samsung,s6e3hf2"; > > reg = <0>; > > vdd3-supply = <&ldo27_reg>; > > vci-supply = <&ldo28_reg>; > > reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; > > enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; > > }; > > }; > > > > The above pipeline is proper but it requires the DSI input MIC > > pipeline to update. > > > > This patch is trying to add panel at port@1 so-that the entire > > pipeline before to panel output is untouched. > > > > Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > --- > > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 16 ++++++++++++++++ > > 1 file changed, 16 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > > index aca01709fd29..e13210c8d7e0 100644 > > --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > > @@ -53,6 +53,16 @@ &cmu_disp { > > }; > > > > &dsi { > > + ports { > > + port@1 { > > + reg = <1>; > > + > > + dsi_out_panel: endpoint { > > + remote-endpoint = <&dsi_in_panel>; > > + }; > > + }; > > + }; > > + > > panel@0 { > > compatible = "samsung,s6e3ha2"; > > reg = <0>; > > @@ -60,6 +70,12 @@ panel@0 { > > vci-supply = <&ldo28_reg>; > > reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; > > enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; > > + > > + port { > > + dsi_in_panel: endpoint { > > + remote-endpoint = <&dsi_out_panel>; > > + }; > > + }; > > > As I already wrote in Exynos thread, DSI host has already parent-child > relation with the panel - DSI host knows well who is connected to it. > Adding another links between them is redundant and has no value added. > > I have already answered in Exynos thread[1] how could you deal with the > issue, you have. > > [1]: > https://lore.kernel.org/dri-devel/e541c52b-9751-933b-5eac-783dd0ed9056@intel.com/ I have commented on this thread for better understanding. Please have a look and respond. Thanks, Jagan.
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index aca01709fd29..e13210c8d7e0 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -53,6 +53,16 @@ &cmu_disp { }; &dsi { + ports { + port@1 { + reg = <1>; + + dsi_out_panel: endpoint { + remote-endpoint = <&dsi_in_panel>; + }; + }; + }; + panel@0 { compatible = "samsung,s6e3ha2"; reg = <0>; @@ -60,6 +70,12 @@ panel@0 { vci-supply = <&ldo28_reg>; reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + + port { + dsi_in_panel: endpoint { + remote-endpoint = <&dsi_out_panel>; + }; + }; }; };
TM2 board DSI pipeline has input from MIC and output to s6e3ha2 panel. The existing pipeline has child nodes of ports, panel and MIC is remote-endpoint reference of port@0 of ports. Adding panel as another child node to DSI is unconventional as pipeline has ports child. However it can be true if MIC is added inside port node like this. dsi { compatible = "samsung,exynos5433-mipi-dsi"; #address-cells = <1>; #size-cells = <0>; port { dsi_to_mic: endpoint { remote-endpoint = <&mic_to_dsi>; }; }; panel@0 { compatible = "samsung,s6e3hf2"; reg = <0>; vdd3-supply = <&ldo27_reg>; vci-supply = <&ldo28_reg>; reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; }; }; The above pipeline is proper but it requires the DSI input MIC pipeline to update. This patch is trying to add panel at port@1 so-that the entire pipeline before to panel output is untouched. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)