@@ -382,12 +382,10 @@ enum dwc2_ep0_state {
* If power_down is enabled, the controller will enter
* power_down in both peripheral and host mode when
* needed.
+ * (-1) - None
* 0 - Clock gating (default)
* 1 - Partial power down
* 2 - Hibernation
- * @no_clock_gating: Specifies whether to avoid clock gating feature.
- * 0 - No (use clock gating)
- * 1 - Yes (avoid it)
* @lpm: Enable LPM support.
* 0 - No
* 1 - Yes
@@ -482,10 +480,10 @@ struct dwc2_core_params {
bool external_id_pin_ctl;
int power_down;
+#define DWC2_POWER_DOWN_PARAM_NONE (-1)
#define DWC2_POWER_DOWN_PARAM_CLOCK_GATING 0
#define DWC2_POWER_DOWN_PARAM_PARTIAL 1
#define DWC2_POWER_DOWN_PARAM_HIBERNATION 2
- bool no_clock_gating;
bool lpm;
bool lpm_clock_gating;
@@ -556,8 +556,10 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
* If neither hibernation nor partial power down are supported,
* clock gating is used to save power.
*/
- if (!hsotg->params.no_clock_gating)
- dwc2_gadget_enter_clock_gating(hsotg);
+ dwc2_gadget_enter_clock_gating(hsotg);
+ break;
+ case DWC2_POWER_DOWN_PARAM_NONE:
+ break;
}
/*
@@ -3338,8 +3338,9 @@ int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
* If not hibernation nor partial power down are supported,
* clock gating is used to save power.
*/
- if (!hsotg->params.no_clock_gating)
- dwc2_host_enter_clock_gating(hsotg);
+ dwc2_host_enter_clock_gating(hsotg);
+ break;
+ case DWC2_POWER_DOWN_PARAM_NONE:
break;
}
@@ -4403,8 +4404,7 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
* If not hibernation nor partial power down are supported,
* clock gating is used to save power.
*/
- if (!hsotg->params.no_clock_gating)
- dwc2_host_enter_clock_gating(hsotg);
+ dwc2_host_enter_clock_gating(hsotg);
/* After entering suspend, hardware is not accessible */
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -75,8 +75,7 @@ static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
- p->power_down = DWC2_POWER_DOWN_PARAM_CLOCK_GATING;
- p->no_clock_gating = true;
+ p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
p->phy_utmi_width = 8;
}
@@ -585,6 +584,7 @@ static void dwc2_check_param_power_down(struct dwc2_hsotg *hsotg)
int param = hsotg->params.power_down;
switch (param) {
+ case DWC2_POWER_DOWN_PARAM_NONE:
case DWC2_POWER_DOWN_PARAM_CLOCK_GATING:
break;
case DWC2_POWER_DOWN_PARAM_PARTIAL:
Refactor no_clock_gating flag into separate DWC2_POWER_DOWN_PARAM_NONE power down state. Suggested-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- This is a follow-up of this discussion: https://lore.kernel.org/linux-usb/26099de1-826f-42bf-0de7-759a47faf4a0@samsung.com/ This should be applied on top of v5.14-rc3. --- drivers/usb/dwc2/core.h | 6 ++---- drivers/usb/dwc2/core_intr.c | 6 ++++-- drivers/usb/dwc2/hcd.c | 8 ++++---- drivers/usb/dwc2/params.c | 4 ++-- 4 files changed, 12 insertions(+), 12 deletions(-) -- 2.17.1