diff mbox series

[v2,04/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards

Message ID 20201027170947.132725-5-krzk@kernel.org
State New
Headers show
Series ARM: dts: samsung: minor node name cleanups | expand

Commit Message

Krzysztof Kozlowski Oct. 27, 2020, 5:09 p.m. UTC 
The Devicetree specification expects device node names to have a generic
name, representing the class of a device.  Also the convention for node
names is to use hyphens, not underscores.

No functional changes.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi   |  8 ++++----
 arch/arm/boot/dts/exynos4412-itop-elite.dts   |  2 +-
 .../boot/dts/exynos4412-itop-scp-core.dtsi    |  2 +-
 arch/arm/boot/dts/exynos4412-midas.dtsi       | 14 ++++++-------
 arch/arm/boot/dts/exynos4412-n710x.dts        |  2 +-
 .../boot/dts/exynos4412-odroid-common.dtsi    |  8 ++++----
 arch/arm/boot/dts/exynos4412-odroidx.dts      |  4 ++--
 arch/arm/boot/dts/exynos4412-origen.dts       | 14 ++++++-------
 arch/arm/boot/dts/exynos4412-smdk4412.dts     | 20 +++++++++----------
 9 files changed, 37 insertions(+), 37 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index 89ed81fb348d..912c78e9ce8c 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -15,7 +15,7 @@  aliases {
 		i2c10 = &i2c_cm36651;
 	};
 
-	aat1290 {
+	led-controller {
 		compatible = "skyworks,aat1290";
 		flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
 		enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
@@ -60,7 +60,7 @@  i2c_ak8975: i2c-gpio-0 {
 		#size-cells = <0>;
 		status = "okay";
 
-		ak8975@c {
+		magnetometer@c {
 			compatible = "asahi-kasei,ak8975";
 			reg = <0x0c>;
 			gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
@@ -75,7 +75,7 @@  i2c_cm36651: i2c-gpio-2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cm36651@18 {
+		light-sensor@18 {
 			compatible = "capella,cm36651";
 			reg = <0x18>;
 			interrupt-parent = <&gpx0>;
@@ -133,7 +133,7 @@  timing-0 {
 };
 
 &i2c_3 {
-	mms114-touchscreen@48 {
+	touchscreen@48 {
 		compatible = "melfas,mms114";
 		reg = <0x48>;
 		interrupt-parent = <&gpm2>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index f6d0a5f5d339..47431307cb3c 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -175,7 +175,7 @@  &i2c_4 {
 	pinctrl-names = "default";
 	status = "okay";
 
-	codec: wm8960@1a {
+	codec: audio-codec@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&pmu_system_controller 0>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index dfceb155b3a7..4583d342af39 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -134,7 +134,7 @@  &i2c_1 {
 	pinctrl-names = "default";
 	status = "okay";
 
-	s5m8767: s5m8767-pmic@66 {
+	s5m8767: pmic@66 {
 		compatible = "samsung,s5m8767-pmic";
 		reg = <0x66>;
 
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 7e7c243ff196..62a8918c0ea5 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -171,7 +171,7 @@  i2c_max77693: i2c-gpio-1 {
 		#size-cells = <0>;
 		status = "okay";
 
-		max77693@66 {
+		pmic@66 {
 			compatible = "maxim,max77693";
 			interrupt-parent = <&gpx1>;
 			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
@@ -220,7 +220,7 @@  i2c_max77693_fuel: i2c-gpio-3 {
 		#size-cells = <0>;
 		status = "okay";
 
-		max77693-fuel-gauge@36 {
+		fuel-gauge@36 {
 			compatible = "maxim,max17047";
 			interrupt-parent = <&gpx2>;
 			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
@@ -550,7 +550,7 @@  &i2c_0 {
 	pinctrl-names = "default";
 	status = "okay";
 
-	s5c73m3: s5c73m3@3c {
+	s5c73m3: image-sensor@3c {
 		compatible = "samsung,s5c73m3";
 		reg = <0x3c>;
 		xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
@@ -577,7 +577,7 @@  &i2c1_isp {
 	pinctrl-0 = <&fimc_is_i2c1>;
 	pinctrl-names = "default";
 
-	s5k6a3@10 {
+	image-sensor@10 {
 		compatible = "samsung,s5k6a3";
 		reg = <0x10>;
 		svdda-supply = <&cam_io_reg>;
@@ -616,7 +616,7 @@  &i2c_4 {
 	pinctrl-names = "default";
 	status = "okay";
 
-	wm1811: wm1811@1a {
+	wm1811: audio-codec@1a {
 		compatible = "wlf,wm1811";
 		reg = <0x1a>;
 		clocks = <&pmu_system_controller 0>,
@@ -665,7 +665,7 @@  &i2c_7 {
 	pinctrl-names = "default";
 	status = "okay";
 
-	max77686: max77686_pmic@9 {
+	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx0>;
 		interrupts = <7 IRQ_TYPE_NONE>;
@@ -1407,7 +1407,7 @@  &spi_1 {
 	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	s5c73m3_spi: s5c73m3@0 {
+	s5c73m3_spi: image-sensor@0 {
 		compatible = "samsung,s5c73m3";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
index a47b7f35fc80..c49dbb7847b8 100644
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -45,7 +45,7 @@  &i2c_3 {
 	pinctrl-names = "default";
 	status = "okay";
 
-	mms152-touchscreen@48 {
+	touchscreen@48 {
 		compatible = "melfas,mms152";
 		reg = <0x48>;
 		interrupt-parent = <&gpm2>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index c3b6e6d367ab..2a6f5b1d7645 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -27,7 +27,7 @@  gpio_keys: gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_power_key>;
 
-		power_key {
+		power-key {
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "power key";
@@ -171,7 +171,7 @@  cooling_map1: map1 {
 };
 
 &pinctrl_1 {
-	gpio_power_key: power_key {
+	gpio_power_key: power-key {
 		samsung,pins = "gpx1-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
@@ -266,7 +266,7 @@  &i2c_0 {
 	samsung,i2c-max-bus-freq = <400000>;
 	status = "okay";
 
-	usb3503: usb3503@8 {
+	usb3503: usb-hub@8 {
 		compatible = "smsc,usb3503";
 		reg = <0x08>;
 
@@ -492,7 +492,7 @@  buck8_reg: BUCK8 {
 
 &i2c_1 {
 	status = "okay";
-	max98090: max98090@10 {
+	max98090: audio-codec@10 {
 		compatible = "maxim,max98090";
 		reg = <0x10>;
 		interrupt-parent = <&gpx0>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 68fe88074d1d..46381e9097f4 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -36,7 +36,7 @@  led2 {
 		};
 	};
 
-	regulator_p3v3 {
+	regulator-1 {
 		compatible = "regulator-fixed";
 		regulator-name = "p3v3_en";
 		regulator-min-microvolt = <3300000>;
@@ -81,7 +81,7 @@  &mshc_0 {
 };
 
 &pinctrl_1 {
-	gpio_home_key: home_key {
+	gpio_home_key: home-key {
 		samsung,pins = "gpx2-2";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index c2e793b69e7d..e1f6de53e20e 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -116,7 +116,7 @@  &i2c_0 {
 	pinctrl-names = "default";
 	status = "okay";
 
-	s5m8767_pmic@66 {
+	pmic@66 {
 		compatible = "samsung,s5m8767-pmic";
 		reg = <0x66>;
 
@@ -453,37 +453,37 @@  &keypad {
 	pinctrl-names = "default";
 	status = "okay";
 
-	key_home {
+	key-home {
 		keypad,row = <0>;
 		keypad,column = <0>;
 		linux,code = <KEY_HOME>;
 	};
 
-	key_down {
+	key-down {
 		keypad,row = <0>;
 		keypad,column = <1>;
 		linux,code = <KEY_DOWN>;
 	};
 
-	key_up {
+	key-up {
 		keypad,row = <1>;
 		keypad,column = <0>;
 		linux,code = <KEY_UP>;
 	};
 
-	key_menu {
+	key-menu {
 		keypad,row = <1>;
 		keypad,column = <1>;
 		linux,code = <KEY_MENU>;
 	};
 
-	key_back {
+	key-back {
 		keypad,row = <2>;
 		keypad,column = <0>;
 		linux,code = <KEY_BACK>;
 	};
 
-	key_enter {
+	key-enter {
 		keypad,row = <2>;
 		keypad,column = <1>;
 		linux,code = <KEY_ENTER>;
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index 49971203a8aa..cc99b955af0c 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -71,61 +71,61 @@  &keypad {
 	pinctrl-names = "default";
 	status = "okay";
 
-	key_1 {
+	key-1 {
 		keypad,row = <1>;
 		keypad,column = <3>;
 		linux,code = <2>;
 	};
 
-	key_2 {
+	key-2 {
 		keypad,row = <1>;
 		keypad,column = <4>;
 		linux,code = <3>;
 	};
 
-	key_3 {
+	key-3 {
 		keypad,row = <1>;
 		keypad,column = <5>;
 		linux,code = <4>;
 	};
 
-	key_4 {
+	key-4 {
 		keypad,row = <1>;
 		keypad,column = <6>;
 		linux,code = <5>;
 	};
 
-	key_5 {
+	key-5 {
 		keypad,row = <1>;
 		keypad,column = <7>;
 		linux,code = <6>;
 	};
 
-	key_A {
+	key-A {
 		keypad,row = <2>;
 		keypad,column = <6>;
 		linux,code = <30>;
 	};
 
-	key_B {
+	key-B {
 		keypad,row = <2>;
 		keypad,column = <7>;
 		linux,code = <48>;
 	};
 
-	key_C {
+	key-C {
 		keypad,row = <0>;
 		keypad,column = <5>;
 		linux,code = <46>;
 	};
 
-	key_D {
+	key-D {
 		keypad,row = <2>;
 		keypad,column = <5>;
 		linux,code = <32>;
 	};
 
-	key_E {
+	key-E {
 		keypad,row = <0>;
 		keypad,column = <7>;
 		linux,code = <18>;