diff mbox series

[10/12] arm64: dts: exynos: adjust node names to DT spec in Exynos5433 TM2

Message ID 20201026181528.163143-11-krzk@kernel.org
State Superseded
Headers show
Series ARM: dts: samsung: minor node name cleanups | expand

Commit Message

Krzysztof Kozlowski Oct. 26, 2020, 6:15 p.m. UTC 
The Devicetree specification expects device node names to have a generic
name, representing the class of a device.  Also the convention for node
names is to use hyphens, not underscores.

No functional changes.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 829fea23d4ab..143f45eaa953 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -94,7 +94,7 @@  i2c_max98504: i2c-gpio-0 {
 		#size-cells = <0>;
 		status = "okay";
 
-		max98504: max98504@31 {
+		max98504: codec@31 {
 			compatible = "maxim,max98504";
 			reg = <0x31>;
 			maxim,rx-path = <1>;
@@ -386,7 +386,7 @@  &hsi2c_0 {
 	status = "okay";
 	clock-frequency = <2500000>;
 
-	s2mps13-pmic@66 {
+	pmic@66 {
 		compatible = "samsung,s2mps13-pmic";
 		interrupt-parent = <&gpa0>;
 		interrupts = <7 IRQ_TYPE_NONE>;
@@ -817,7 +817,7 @@  &hsi2c_7 {
 	status = "okay";
 	clock-frequency = <1000000>;
 
-	sii8620@39 {
+	bridge@39 {
 		reg = <0x39>;
 		compatible = "sil,sii8620";
 		cvcc10-supply = <&ldo36_reg>;
@@ -852,7 +852,7 @@  mhl_to_musb_con: endpoint {
 &hsi2c_8 {
 	status = "okay";
 
-	max77843@66 {
+	pmic@66 {
 		compatible = "maxim,max77843";
 		interrupt-parent = <&gpa1>;
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
@@ -1231,7 +1231,7 @@  &spi_1 {
 	cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	wm5110: wm5110-codec@0 {
+	wm5110: codec@0 {
 		compatible = "wlf,wm5110";
 		reg = <0x0>;
 		spi-max-frequency = <20000000>;