mbox series

[0/3] Add support for Hardkernel's Odroid HC1 board

Message ID 1506684783-9722-1-git-send-email-m.szyprowski@samsung.com
Headers show
Series Add support for Hardkernel's Odroid HC1 board | expand

Message

Marek Szyprowski Sept. 29, 2017, 11:33 a.m. UTC 
Hi!

This patchset add support for Exynos5422 based Hardkernel's Odroid HC1
board. Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI,
no eMMC, no build-in USB3.0 hub, no extension port pins, and no GPIO
button. USB3.0 ports are used for build-in JMicron USB to SATA bridge and
Gigabit R8152 ethernet chips. HC1 uses only passive cooling.

This patchset is based on current Krzysztof's next/dt branch.

Best regards
Marek Szyprowski
Samsung R&D Institute Poland


Patch summary:

Marek Szyprowski (3):
  ARM: dts: exynos: Move audio clocks configuration to
    odroidxu3-audio.dtsi
  ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board
  ARM: exynos_defconfig: Enable UAS support for Odroid HC1 board

 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi      | 443 +++++++++++++++++++++
 arch/arm/boot/dts/exynos5422-odroidhc1.dts         | 217 ++++++++++
 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi  |  13 +
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 440 +-------------------
 arch/arm/configs/exynos_defconfig                  |   2 +-
 6 files changed, 676 insertions(+), 440 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos5422-odroid-core.dtsi
 create mode 100644 arch/arm/boot/dts/exynos5422-odroidhc1.dts

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html