| Message ID | 5fe697a29958813ce3c07104eb6f9d7a95b176ac.1674602698.git.quic_collinsd@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | thermal: qcom-spmi-temp-alarm: add support for new TEMP_ALARM subtypes | expand |
On 25/01/2023 01:46, David Collins wrote: > Add support for TEMP_ALARM LITE PMIC peripherals. This subtype > utilizes a pair of registers to configure a warning interrupt > threshold temperature and an automatic hardware shutdown > threshold temperature. This adds additional DT requirements to the lite temp-alarm trip points. Please consider adding a separate DT compatible string and describing these details in DT bindings. And the commit message _must_ also describe them. > > Signed-off-by: David Collins <quic_collinsd@quicinc.com> > --- > drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 217 +++++++++++++++++++- > 1 file changed, 208 insertions(+), 9 deletions(-) > > diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c > index 1fe8ff7a274e..dbf13dec7acd 100644 > --- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c > +++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c > @@ -4,6 +4,7 @@ > * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. > */ > > +#include <linux/bitfield.h> > #include <linux/bitops.h> > #include <linux/delay.h> > #include <linux/err.h> > @@ -24,21 +25,28 @@ > #define QPNP_TM_REG_TYPE 0x04 > #define QPNP_TM_REG_SUBTYPE 0x05 > #define QPNP_TM_REG_STATUS 0x08 > +#define QPNP_TM_REG_IRQ_STATUS 0x10 > #define QPNP_TM_REG_SHUTDOWN_CTRL1 0x40 > #define QPNP_TM_REG_ALARM_CTRL 0x46 > /* TEMP_DAC_* registers are only present for TEMP_GEN2 v2.0 */ > #define QPNP_TM_REG_TEMP_DAC_STG1 0x47 > #define QPNP_TM_REG_TEMP_DAC_STG2 0x48 > #define QPNP_TM_REG_TEMP_DAC_STG3 0x49 > +#define QPNP_TM_REG_LITE_TEMP_CFG1 0x50 > +#define QPNP_TM_REG_LITE_TEMP_CFG2 0x51 > > #define QPNP_TM_TYPE 0x09 > #define QPNP_TM_SUBTYPE_GEN1 0x08 > #define QPNP_TM_SUBTYPE_GEN2 0x09 > +#define QPNP_TM_SUBTYPE_LITE 0xC0 > > #define STATUS_GEN1_STAGE_MASK GENMASK(1, 0) > #define STATUS_GEN2_STATE_MASK GENMASK(6, 4) > #define STATUS_GEN2_STATE_SHIFT 4 > > +/* IRQ status only needed for TEMP_ALARM_LITE */ > +#define IRQ_STATUS_MASK BIT(0) > + > #define SHUTDOWN_CTRL1_OVERRIDE_S2 BIT(6) > #define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0) > > @@ -46,6 +54,8 @@ > > #define ALARM_CTRL_FORCE_ENABLE BIT(7) > > +#define LITE_TEMP_CFG_THRESHOLD_MASK GENMASK(3, 2) > + > #define THRESH_COUNT 4 > #define STAGE_COUNT 3 > > @@ -90,6 +100,19 @@ static const long temp_dac_max[STAGE_COUNT] = { > 119375, 159375, 159375 > }; > > +/* > + * TEMP_ALARM_LITE has two stages: warning and shutdown with independently > + * configured threshold temperatures. > + */ > + > +static const long temp_map_lite_warning[THRESH_COUNT] = { > + 115000, 125000, 135000, 145000 > +}; > + > +static const long temp_map_lite_shutdown[THRESH_COUNT] = { > + 135000, 145000, 160000, 175000 > +}; > + > /* Temperature in Milli Celsius reported during stage 0 if no ADC is present */ > #define DEFAULT_TEMP 37000 > > @@ -146,7 +169,7 @@ static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data) > */ > static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage) > { > - if (chip->has_temp_dac) { > + if (chip->has_temp_dac || chip->subtype == QPNP_TM_SUBTYPE_LITE) { > if (stage == 0 || stage > STAGE_COUNT) > return 0; > > @@ -164,19 +187,26 @@ static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage) > * qpnp_tm_get_temp_stage() - return over-temperature stage > * @chip: Pointer to the qpnp_tm chip > * > - * Return: stage (GEN1) or state (GEN2) on success, or errno on failure. > + * Return: stage (GEN1), state (GEN2), or alarm interrupt state (LITE) on > + * success; or errno on failure. > */ > static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip) > { > int ret; > + u16 addr = QPNP_TM_REG_STATUS; > u8 reg = 0; > > - ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®); > + if (chip->subtype == QPNP_TM_SUBTYPE_LITE) > + addr = QPNP_TM_REG_IRQ_STATUS; > + > + ret = qpnp_tm_read(chip, addr, ®); > if (ret < 0) > return ret; > > if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) > ret = reg & STATUS_GEN1_STAGE_MASK; > + else if (chip->subtype == QPNP_TM_SUBTYPE_LITE) > + ret = reg & IRQ_STATUS_MASK; > else > ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT; > > @@ -199,7 +229,8 @@ static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip) > return ret; > stage = ret; > > - if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) { > + if (chip->subtype == QPNP_TM_SUBTYPE_GEN1 > + || chip->subtype == QPNP_TM_SUBTYPE_LITE) { > stage_new = stage; > stage_old = chip->stage; > } else { > @@ -282,6 +313,78 @@ static int qpnp_tm_set_temp_dac_thresh(struct qpnp_tm_chip *chip, int trip, > return 0; > } > > +static int qpnp_tm_set_temp_lite_thresh(struct qpnp_tm_chip *chip, int trip, > + int temp) > +{ > + int ret, temp_cfg, i; > + const long *temp_map; > + u16 addr; > + u8 reg, thresh; > + > + if (trip < 0 || trip >= STAGE_COUNT) { > + dev_err(chip->dev, "invalid TEMP_LITE trip = %d\n", trip); > + return -EINVAL; > + } > + > + switch (trip) { > + case 0: > + temp_map = temp_map_lite_warning; > + addr = QPNP_TM_REG_LITE_TEMP_CFG1; > + break; > + case 1: > + /* > + * The second trip point is purely in software to facilitate > + * a controlled shutdown after the warning threshold is crossed > + * but before the automatic hardware shutdown threshold is > + * crossed. > + */ > + return 0; > + case 2: > + temp_map = temp_map_lite_shutdown; > + addr = QPNP_TM_REG_LITE_TEMP_CFG2; > + break; > + default: > + return 0; > + } > + > + if (temp < temp_map[THRESH_MIN] || temp > temp_map[THRESH_MAX]) { > + dev_err(chip->dev, "invalid TEMP_LITE temp = %d\n", temp); > + return -EINVAL; > + } > + > + thresh = 0; > + temp_cfg = temp_map[thresh]; > + for (i = THRESH_MAX; i >= THRESH_MIN; i--) { > + if (temp >= temp_map[i]) { > + thresh = i; > + temp_cfg = temp_map[i]; > + break; > + } > + } > + > + if (temp_cfg == chip->temp_dac_map[trip]) > + return 0; > + > + ret = qpnp_tm_read(chip, addr, ®); > + if (ret < 0) { > + dev_err(chip->dev, "LITE_TEMP_CFG read failed, ret=%d\n", ret); > + return ret; > + } > + > + reg &= ~LITE_TEMP_CFG_THRESHOLD_MASK; > + reg |= FIELD_PREP(LITE_TEMP_CFG_THRESHOLD_MASK, thresh); > + > + ret = qpnp_tm_write(chip, addr, reg); > + if (ret < 0) { > + dev_err(chip->dev, "LITE_TEMP_CFG write failed, ret=%d\n", ret); > + return ret; > + } > + > + chip->temp_dac_map[trip] = temp_cfg; > + > + return 0; > +} > + > static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip, > int temp) > { > @@ -388,6 +491,24 @@ static const struct thermal_zone_device_ops qpnp_tm_sensor_temp_dac_ops = { > .set_trip_temp = qpnp_tm_set_temp_dac_trip_temp, > }; > > +static int qpnp_tm_set_temp_lite_trip_temp(struct thermal_zone_device *tz, > + int trip, int temp) > +{ > + struct qpnp_tm_chip *chip = tz->devdata; > + int ret; > + > + mutex_lock(&chip->lock); > + ret = qpnp_tm_set_temp_lite_thresh(chip, trip, temp); > + mutex_unlock(&chip->lock); > + > + return ret; > +} > + > +static const struct thermal_zone_device_ops qpnp_tm_sensor_temp_lite_ops = { > + .get_temp = qpnp_tm_get_temp, > + .set_trip_temp = qpnp_tm_set_temp_lite_trip_temp, > +}; > + > static irqreturn_t qpnp_tm_isr(int irq, void *data) > { > struct qpnp_tm_chip *chip = data; > @@ -474,6 +595,71 @@ static int qpnp_tm_temp_dac_init(struct qpnp_tm_chip *chip) > return 0; > } > > +/* Configure TEMP_LITE registers based on DT thermal_zone trips */ > +static int qpnp_tm_temp_lite_update_trip_temps(struct qpnp_tm_chip *chip) > +{ > + const struct thermal_trip *trips; > + int ret, ntrips, i; > + > + ntrips = of_thermal_get_ntrips(chip->tz_dev); > + /* Keep hardware defaults if no DT trips are defined. */ > + if (ntrips <= 0) > + return 0; > + > + trips = of_thermal_get_trip_points(chip->tz_dev); > + if (!trips) > + return -EINVAL; > + > + for (i = 0; i < ntrips; i++) { > + if (of_thermal_is_trip_valid(chip->tz_dev, i)) { > + ret = qpnp_tm_set_temp_lite_thresh(chip, i, > + trips[i].temperature); > + if (ret < 0) > + return ret; > + } > + } > + > + /* Verify that trips are strictly increasing. */ > + if (chip->temp_dac_map[2] <= chip->temp_dac_map[0]) { > + dev_err(chip->dev, "Threshold 2=%ld <= threshold 0=%ld\n", > + chip->temp_dac_map[2], chip->temp_dac_map[0]); > + return -EINVAL; > + } > + > + return 0; > +} > + > +/* Read the hardware default TEMP_LITE stage threshold temperatures */ > +static int qpnp_tm_temp_lite_init(struct qpnp_tm_chip *chip) > +{ > + int ret, thresh; > + u8 reg = 0; > + > + /* > + * Store the warning trip temp in temp_dac_map[0] and the shutdown trip > + * temp in temp_dac_map[2]. The second trip point is purely in software > + * to facilitate a controlled shutdown after the warning threshold is > + * crossed but before the automatic hardware shutdown threshold is > + * crossed. Thus, there is no register to read for the second trip > + * point. > + */ > + ret = qpnp_tm_read(chip, QPNP_TM_REG_LITE_TEMP_CFG1, ®); > + if (ret < 0) > + return ret; > + > + thresh = FIELD_GET(LITE_TEMP_CFG_THRESHOLD_MASK, reg); > + chip->temp_dac_map[0] = temp_map_lite_warning[thresh]; > + > + ret = qpnp_tm_read(chip, QPNP_TM_REG_LITE_TEMP_CFG2, ®); > + if (ret < 0) > + return ret; > + > + thresh = FIELD_GET(LITE_TEMP_CFG_THRESHOLD_MASK, reg); > + chip->temp_dac_map[2] = temp_map_lite_shutdown[thresh]; > + > + return 0; > +} > + > /* > * This function initializes the internal temp value based on only the > * current thermal stage and threshold. Setup threshold control and > @@ -500,13 +686,18 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip) > goto out; > chip->stage = ret; > > - stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1 > - ? chip->stage : alarm_state_map[chip->stage]; > + stage = (chip->subtype == QPNP_TM_SUBTYPE_GEN1 > + || chip->subtype == QPNP_TM_SUBTYPE_LITE) > + ? chip->stage : alarm_state_map[chip->stage]; > > if (stage) > chip->temp = qpnp_tm_decode_temp(chip, stage); > > - if (chip->has_temp_dac) { > + if (chip->subtype == QPNP_TM_SUBTYPE_LITE) { > + ret = qpnp_tm_temp_lite_update_trip_temps(chip); > + if (ret < 0) > + goto out; > + } else if (chip->has_temp_dac) { > ret = qpnp_tm_temp_dac_update_trip_temps(chip); > if (ret < 0) > goto out; > @@ -598,7 +789,8 @@ static int qpnp_tm_probe(struct platform_device *pdev) > chip->dig_revision = (dig_major << 8) | dig_minor; > > if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1 > - && subtype != QPNP_TM_SUBTYPE_GEN2)) { > + && subtype != QPNP_TM_SUBTYPE_GEN2 > + && subtype != QPNP_TM_SUBTYPE_LITE)) { > dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n", > type, subtype); > return -ENODEV; > @@ -610,7 +802,7 @@ static int qpnp_tm_probe(struct platform_device *pdev) > chip->has_temp_dac = true; > else if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1) > chip->temp_map = &temp_map_gen2_v1; > - else > + else if (subtype == QPNP_TM_SUBTYPE_GEN1) > chip->temp_map = &temp_map_gen1; > > if (chip->has_temp_dac) { > @@ -620,6 +812,13 @@ static int qpnp_tm_probe(struct platform_device *pdev) > return ret; > } > > + if (chip->subtype == QPNP_TM_SUBTYPE_LITE) { > + ops = &qpnp_tm_sensor_temp_lite_ops; > + ret = qpnp_tm_temp_lite_init(chip); > + if (ret < 0) > + return ret; > + } > + > /* > * Register the sensor before initializing the hardware to be able to > * read the trip points. get_temp() returns the default temperature
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c index 1fe8ff7a274e..dbf13dec7acd 100644 --- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c +++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c @@ -4,6 +4,7 @@ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. */ +#include <linux/bitfield.h> #include <linux/bitops.h> #include <linux/delay.h> #include <linux/err.h> @@ -24,21 +25,28 @@ #define QPNP_TM_REG_TYPE 0x04 #define QPNP_TM_REG_SUBTYPE 0x05 #define QPNP_TM_REG_STATUS 0x08 +#define QPNP_TM_REG_IRQ_STATUS 0x10 #define QPNP_TM_REG_SHUTDOWN_CTRL1 0x40 #define QPNP_TM_REG_ALARM_CTRL 0x46 /* TEMP_DAC_* registers are only present for TEMP_GEN2 v2.0 */ #define QPNP_TM_REG_TEMP_DAC_STG1 0x47 #define QPNP_TM_REG_TEMP_DAC_STG2 0x48 #define QPNP_TM_REG_TEMP_DAC_STG3 0x49 +#define QPNP_TM_REG_LITE_TEMP_CFG1 0x50 +#define QPNP_TM_REG_LITE_TEMP_CFG2 0x51 #define QPNP_TM_TYPE 0x09 #define QPNP_TM_SUBTYPE_GEN1 0x08 #define QPNP_TM_SUBTYPE_GEN2 0x09 +#define QPNP_TM_SUBTYPE_LITE 0xC0 #define STATUS_GEN1_STAGE_MASK GENMASK(1, 0) #define STATUS_GEN2_STATE_MASK GENMASK(6, 4) #define STATUS_GEN2_STATE_SHIFT 4 +/* IRQ status only needed for TEMP_ALARM_LITE */ +#define IRQ_STATUS_MASK BIT(0) + #define SHUTDOWN_CTRL1_OVERRIDE_S2 BIT(6) #define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0) @@ -46,6 +54,8 @@ #define ALARM_CTRL_FORCE_ENABLE BIT(7) +#define LITE_TEMP_CFG_THRESHOLD_MASK GENMASK(3, 2) + #define THRESH_COUNT 4 #define STAGE_COUNT 3 @@ -90,6 +100,19 @@ static const long temp_dac_max[STAGE_COUNT] = { 119375, 159375, 159375 }; +/* + * TEMP_ALARM_LITE has two stages: warning and shutdown with independently + * configured threshold temperatures. + */ + +static const long temp_map_lite_warning[THRESH_COUNT] = { + 115000, 125000, 135000, 145000 +}; + +static const long temp_map_lite_shutdown[THRESH_COUNT] = { + 135000, 145000, 160000, 175000 +}; + /* Temperature in Milli Celsius reported during stage 0 if no ADC is present */ #define DEFAULT_TEMP 37000 @@ -146,7 +169,7 @@ static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data) */ static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage) { - if (chip->has_temp_dac) { + if (chip->has_temp_dac || chip->subtype == QPNP_TM_SUBTYPE_LITE) { if (stage == 0 || stage > STAGE_COUNT) return 0; @@ -164,19 +187,26 @@ static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage) * qpnp_tm_get_temp_stage() - return over-temperature stage * @chip: Pointer to the qpnp_tm chip * - * Return: stage (GEN1) or state (GEN2) on success, or errno on failure. + * Return: stage (GEN1), state (GEN2), or alarm interrupt state (LITE) on + * success; or errno on failure. */ static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip) { int ret; + u16 addr = QPNP_TM_REG_STATUS; u8 reg = 0; - ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®); + if (chip->subtype == QPNP_TM_SUBTYPE_LITE) + addr = QPNP_TM_REG_IRQ_STATUS; + + ret = qpnp_tm_read(chip, addr, ®); if (ret < 0) return ret; if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) ret = reg & STATUS_GEN1_STAGE_MASK; + else if (chip->subtype == QPNP_TM_SUBTYPE_LITE) + ret = reg & IRQ_STATUS_MASK; else ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT; @@ -199,7 +229,8 @@ static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip) return ret; stage = ret; - if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) { + if (chip->subtype == QPNP_TM_SUBTYPE_GEN1 + || chip->subtype == QPNP_TM_SUBTYPE_LITE) { stage_new = stage; stage_old = chip->stage; } else { @@ -282,6 +313,78 @@ static int qpnp_tm_set_temp_dac_thresh(struct qpnp_tm_chip *chip, int trip, return 0; } +static int qpnp_tm_set_temp_lite_thresh(struct qpnp_tm_chip *chip, int trip, + int temp) +{ + int ret, temp_cfg, i; + const long *temp_map; + u16 addr; + u8 reg, thresh; + + if (trip < 0 || trip >= STAGE_COUNT) { + dev_err(chip->dev, "invalid TEMP_LITE trip = %d\n", trip); + return -EINVAL; + } + + switch (trip) { + case 0: + temp_map = temp_map_lite_warning; + addr = QPNP_TM_REG_LITE_TEMP_CFG1; + break; + case 1: + /* + * The second trip point is purely in software to facilitate + * a controlled shutdown after the warning threshold is crossed + * but before the automatic hardware shutdown threshold is + * crossed. + */ + return 0; + case 2: + temp_map = temp_map_lite_shutdown; + addr = QPNP_TM_REG_LITE_TEMP_CFG2; + break; + default: + return 0; + } + + if (temp < temp_map[THRESH_MIN] || temp > temp_map[THRESH_MAX]) { + dev_err(chip->dev, "invalid TEMP_LITE temp = %d\n", temp); + return -EINVAL; + } + + thresh = 0; + temp_cfg = temp_map[thresh]; + for (i = THRESH_MAX; i >= THRESH_MIN; i--) { + if (temp >= temp_map[i]) { + thresh = i; + temp_cfg = temp_map[i]; + break; + } + } + + if (temp_cfg == chip->temp_dac_map[trip]) + return 0; + + ret = qpnp_tm_read(chip, addr, ®); + if (ret < 0) { + dev_err(chip->dev, "LITE_TEMP_CFG read failed, ret=%d\n", ret); + return ret; + } + + reg &= ~LITE_TEMP_CFG_THRESHOLD_MASK; + reg |= FIELD_PREP(LITE_TEMP_CFG_THRESHOLD_MASK, thresh); + + ret = qpnp_tm_write(chip, addr, reg); + if (ret < 0) { + dev_err(chip->dev, "LITE_TEMP_CFG write failed, ret=%d\n", ret); + return ret; + } + + chip->temp_dac_map[trip] = temp_cfg; + + return 0; +} + static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip, int temp) { @@ -388,6 +491,24 @@ static const struct thermal_zone_device_ops qpnp_tm_sensor_temp_dac_ops = { .set_trip_temp = qpnp_tm_set_temp_dac_trip_temp, }; +static int qpnp_tm_set_temp_lite_trip_temp(struct thermal_zone_device *tz, + int trip, int temp) +{ + struct qpnp_tm_chip *chip = tz->devdata; + int ret; + + mutex_lock(&chip->lock); + ret = qpnp_tm_set_temp_lite_thresh(chip, trip, temp); + mutex_unlock(&chip->lock); + + return ret; +} + +static const struct thermal_zone_device_ops qpnp_tm_sensor_temp_lite_ops = { + .get_temp = qpnp_tm_get_temp, + .set_trip_temp = qpnp_tm_set_temp_lite_trip_temp, +}; + static irqreturn_t qpnp_tm_isr(int irq, void *data) { struct qpnp_tm_chip *chip = data; @@ -474,6 +595,71 @@ static int qpnp_tm_temp_dac_init(struct qpnp_tm_chip *chip) return 0; } +/* Configure TEMP_LITE registers based on DT thermal_zone trips */ +static int qpnp_tm_temp_lite_update_trip_temps(struct qpnp_tm_chip *chip) +{ + const struct thermal_trip *trips; + int ret, ntrips, i; + + ntrips = of_thermal_get_ntrips(chip->tz_dev); + /* Keep hardware defaults if no DT trips are defined. */ + if (ntrips <= 0) + return 0; + + trips = of_thermal_get_trip_points(chip->tz_dev); + if (!trips) + return -EINVAL; + + for (i = 0; i < ntrips; i++) { + if (of_thermal_is_trip_valid(chip->tz_dev, i)) { + ret = qpnp_tm_set_temp_lite_thresh(chip, i, + trips[i].temperature); + if (ret < 0) + return ret; + } + } + + /* Verify that trips are strictly increasing. */ + if (chip->temp_dac_map[2] <= chip->temp_dac_map[0]) { + dev_err(chip->dev, "Threshold 2=%ld <= threshold 0=%ld\n", + chip->temp_dac_map[2], chip->temp_dac_map[0]); + return -EINVAL; + } + + return 0; +} + +/* Read the hardware default TEMP_LITE stage threshold temperatures */ +static int qpnp_tm_temp_lite_init(struct qpnp_tm_chip *chip) +{ + int ret, thresh; + u8 reg = 0; + + /* + * Store the warning trip temp in temp_dac_map[0] and the shutdown trip + * temp in temp_dac_map[2]. The second trip point is purely in software + * to facilitate a controlled shutdown after the warning threshold is + * crossed but before the automatic hardware shutdown threshold is + * crossed. Thus, there is no register to read for the second trip + * point. + */ + ret = qpnp_tm_read(chip, QPNP_TM_REG_LITE_TEMP_CFG1, ®); + if (ret < 0) + return ret; + + thresh = FIELD_GET(LITE_TEMP_CFG_THRESHOLD_MASK, reg); + chip->temp_dac_map[0] = temp_map_lite_warning[thresh]; + + ret = qpnp_tm_read(chip, QPNP_TM_REG_LITE_TEMP_CFG2, ®); + if (ret < 0) + return ret; + + thresh = FIELD_GET(LITE_TEMP_CFG_THRESHOLD_MASK, reg); + chip->temp_dac_map[2] = temp_map_lite_shutdown[thresh]; + + return 0; +} + /* * This function initializes the internal temp value based on only the * current thermal stage and threshold. Setup threshold control and @@ -500,13 +686,18 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip) goto out; chip->stage = ret; - stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1 - ? chip->stage : alarm_state_map[chip->stage]; + stage = (chip->subtype == QPNP_TM_SUBTYPE_GEN1 + || chip->subtype == QPNP_TM_SUBTYPE_LITE) + ? chip->stage : alarm_state_map[chip->stage]; if (stage) chip->temp = qpnp_tm_decode_temp(chip, stage); - if (chip->has_temp_dac) { + if (chip->subtype == QPNP_TM_SUBTYPE_LITE) { + ret = qpnp_tm_temp_lite_update_trip_temps(chip); + if (ret < 0) + goto out; + } else if (chip->has_temp_dac) { ret = qpnp_tm_temp_dac_update_trip_temps(chip); if (ret < 0) goto out; @@ -598,7 +789,8 @@ static int qpnp_tm_probe(struct platform_device *pdev) chip->dig_revision = (dig_major << 8) | dig_minor; if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1 - && subtype != QPNP_TM_SUBTYPE_GEN2)) { + && subtype != QPNP_TM_SUBTYPE_GEN2 + && subtype != QPNP_TM_SUBTYPE_LITE)) { dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n", type, subtype); return -ENODEV; @@ -610,7 +802,7 @@ static int qpnp_tm_probe(struct platform_device *pdev) chip->has_temp_dac = true; else if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1) chip->temp_map = &temp_map_gen2_v1; - else + else if (subtype == QPNP_TM_SUBTYPE_GEN1) chip->temp_map = &temp_map_gen1; if (chip->has_temp_dac) { @@ -620,6 +812,13 @@ static int qpnp_tm_probe(struct platform_device *pdev) return ret; } + if (chip->subtype == QPNP_TM_SUBTYPE_LITE) { + ops = &qpnp_tm_sensor_temp_lite_ops; + ret = qpnp_tm_temp_lite_init(chip); + if (ret < 0) + return ret; + } + /* * Register the sensor before initializing the hardware to be able to * read the trip points. get_temp() returns the default temperature
Add support for TEMP_ALARM LITE PMIC peripherals. This subtype utilizes a pair of registers to configure a warning interrupt threshold temperature and an automatic hardware shutdown threshold temperature. Signed-off-by: David Collins <quic_collinsd@quicinc.com> --- drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 217 +++++++++++++++++++- 1 file changed, 208 insertions(+), 9 deletions(-)