From patchwork Mon Sep 17 20:03:31 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "\(Exiting\) Baolin Wang" X-Patchwork-Id: 146861 Delivered-To: patch@linaro.org Received: by 2002:a2e:1648:0:0:0:0:0 with SMTP id 8-v6csp4181367ljw; Mon, 17 Sep 2018 13:04:51 -0700 (PDT) X-Google-Smtp-Source: ANB0VdYVVkBU9yBiNRqLOzN2yFYayVLB4cmbskhPWsjgsIeY+TDNxm2h1CyCRKSsY3jumxYODnxB X-Received: by 2002:a17:902:7586:: with SMTP id j6-v6mr26221921pll.295.1537214691724; Mon, 17 Sep 2018 13:04:51 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1537214691; cv=none; d=google.com; s=arc-20160816; b=N45TVVs2ROSnKeSh2c7k0O2Opug92YiGahhq2nuR5y3sQRz+1N1C4r20tL4QEK0Kc3 zBL49j2NvgsXxaRluT8CR9dNVMQPqm318QSW76aL+YBau9ARYMAmuJSm5dXnTJjPAkze Q+Xu2CY11LliNKOECDZskvu8MeSgjqa43kNp3g+yAQZUdYt74jzxbU4H2D++tTliJI3X H/0B9eti17Kjzre6ZHjPl09CUenqj9kIQc50RbAcEsksVT8INkMQBuv+Gkj/NhalXXK6 80Ji9OHwRWPiC/V+yzH2fnyrk7bl1uyVWXXMKZbi/uolImE7Bkn4/dST2E1cMnwUTYGH +PCQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:references :in-reply-to:message-id:date:subject:cc:to:from:dkim-signature; bh=cYhhxnWPR3X9AZDrgpBznCMh7cay7s6sjeRlVjXOx7E=; b=f6RA4zFBQSttbfXvbK0jqL7/MXQ4BRxpDUkcUm6HOPWLGMmL6XZrXHJnfa2coUe83n HRpSuyUWaRPdd/OG6pCtnae11lyvLLQTAhZlVehb496pG9cFdjMz5sM6+JZ2KnOa9pJ0 skNMhxDVAcQWvKAM7vaOFFa0XfzOdHhXczd/pXrEMFqf6HMxdwBxHhsGMTAjQVyanoDs /UXzPPHWLlJ+Wvcyfou7GVae7aQascBcL79B1muxIMlOYLxBA3Yt30nD6IYy7ZVApIfX yDLnldJxy8u9Bah4Bo+USLPW3TJII6lEgkbJREB2PNzkCRGctMp2khOMtWnYmy1pN7+s yzTw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=NE84eMlc; spf=pass (google.com: best guess record for domain of linux-pm-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-pm-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id q17-v6si15056795pgc.464.2018.09.17.13.04.51; Mon, 17 Sep 2018 13:04:51 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-pm-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=NE84eMlc; spf=pass (google.com: best guess record for domain of linux-pm-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-pm-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728415AbeIRBdj (ORCPT + 10 others); Mon, 17 Sep 2018 21:33:39 -0400 Received: from mail-pg1-f194.google.com ([209.85.215.194]:34363 "EHLO mail-pg1-f194.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728409AbeIRBdj (ORCPT ); Mon, 17 Sep 2018 21:33:39 -0400 Received: by mail-pg1-f194.google.com with SMTP id d19-v6so8193364pgv.1 for ; Mon, 17 Sep 2018 13:04:49 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :in-reply-to:references; bh=cYhhxnWPR3X9AZDrgpBznCMh7cay7s6sjeRlVjXOx7E=; b=NE84eMlcgVFeFUEQ0iAfFUgU3isr2uciEf1P88SKku+UFqc2kjsWtezGwBlukXzv2K qexllxqJmXhrD61+yjKIiUt6PCRCGwYVXKJFuWgb1TGalfCRlpXpjFSpj88cBG0obQTk MZ1VdMEh0hPHmDhfJykGnTByjDttm2383z+pM= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:in-reply-to:references; bh=cYhhxnWPR3X9AZDrgpBznCMh7cay7s6sjeRlVjXOx7E=; b=XMYbx/7amI6eqXqBTrxuI6ydxTo36iaYaIv2ZYqaaXTxv42sOu0cNJg+/1v5rEN7fl uzE8cz9sZW7d4estm0EfBFsoeLeUOjZHj6nesSS0WpcT9TIxntwfAAG7dDzcUlCPo66n +j1Zp+OK5L/HbeTSxHF1oX2mu51rmULcV6LnlWzB/6oQzxmuV5Vu47ScH3ZoGyywryDU IaPRG70KQ16Mr2PEjcmwZ9CST9KTt5IoE6oxxmSbt9qgzfTy96u0HHroXPxKF6nlbrpD nCJQZKyTTgPZT9olMnRyuu7j0zlJm3mQzQYTevXl4lKED2vObS93FWnrkRhd+9LmFEtq fdQg== X-Gm-Message-State: APzg51ASxKcLIu9pRKzZuhnWxeQTLKEv9rJ5CLLj+96msfpUWSxVLPfW K/BDzSi+QtpnR7tgnnxsmrahcw== X-Received: by 2002:a62:1456:: with SMTP id 83-v6mr27182223pfu.50.1537214688940; Mon, 17 Sep 2018 13:04:48 -0700 (PDT) Received: from ubuntu.localdomain ([209.82.80.116]) by smtp.gmail.com with ESMTPSA id i3-v6sm16965857pgq.35.2018.09.17.13.04.45 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Mon, 17 Sep 2018 13:04:48 -0700 (PDT) From: Baolin Wang To: sre@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, baolin.wang@linaro.org, broonie@kernel.org, yuanjiang.yu@spreadtrum.com, krzk@kernel.org Subject: [PATCH v3 2/2] power: supply: Add Spreadtrum SC2731 charger support Date: Mon, 17 Sep 2018 13:03:31 -0700 Message-Id: <57bf9920abdcd58b21833105cc7f3a98a3f7d45a.1537214465.git.baolin.wang@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <8a8d31119bc723a0012afa8e517015dbba68fee9.1537214465.git.baolin.wang@linaro.org> References: <8a8d31119bc723a0012afa8e517015dbba68fee9.1537214465.git.baolin.wang@linaro.org> In-Reply-To: <8a8d31119bc723a0012afa8e517015dbba68fee9.1537214465.git.baolin.wang@linaro.org> References: <8a8d31119bc723a0012afa8e517015dbba68fee9.1537214465.git.baolin.wang@linaro.org> Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org This patch adds the SC2731 PMIC switch charger support. Signed-off-by: Baolin Wang Reviewed-by: Krzysztof Kozlowski --- Changes from v2: - Add reviewed tag from Krzysztof. - Change current unit to uA instead of mA. Changes from v1: - Remove some redundant head files. - Add one mutex to make sure getting the charger status is correct. - Fix some coding style issues. - Use standard DT properties. --- drivers/power/supply/Kconfig | 7 + drivers/power/supply/Makefile | 1 + drivers/power/supply/sc2731_charger.c | 504 ++++++++++++++++++++++++++++++++++ 3 files changed, 512 insertions(+) create mode 100644 drivers/power/supply/sc2731_charger.c -- 1.9.1 diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index ff6dab0..f27cf07 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -645,4 +645,11 @@ config CHARGER_CROS_USBPD what is connected to USB PD ports from the EC and converts that into power_supply properties. +config CHARGER_SC2731 + tristate "Spreadtrum SC2731 charger driver" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + help + Say Y here to enable support for battery charging with SC2731 + PMIC chips. + endif # POWER_SUPPLY diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index a26b402..767105b 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -85,3 +85,4 @@ obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o +obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o diff --git a/drivers/power/supply/sc2731_charger.c b/drivers/power/supply/sc2731_charger.c new file mode 100644 index 0000000..525a820 --- /dev/null +++ b/drivers/power/supply/sc2731_charger.c @@ -0,0 +1,504 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 Spreadtrum Communications Inc. + +#include +#include +#include +#include +#include +#include +#include + +/* PMIC global registers definition */ +#define SC2731_CHARGE_STATUS 0xedc +#define SC2731_CHARGE_FULL BIT(4) +#define SC2731_MODULE_EN1 0xc0c +#define SC2731_CHARGE_EN BIT(5) + +/* SC2731 switch charger registers definition */ +#define SC2731_CHG_CFG0 0x0 +#define SC2731_CHG_CFG1 0x4 +#define SC2731_CHG_CFG2 0x8 +#define SC2731_CHG_CFG3 0xc +#define SC2731_CHG_CFG4 0x10 +#define SC2731_CHG_CFG5 0x28 + +/* SC2731_CHG_CFG0 register definition */ +#define SC2731_PRECHG_RNG_SHIFT 11 +#define SC2731_PRECHG_RNG_MASK GENMASK(12, 11) + +#define SC2731_TERMINATION_VOL_MASK GENMASK(2, 1) +#define SC2731_TERMINATION_VOL_SHIFT 1 +#define SC2731_TERMINATION_VOL_CAL_MASK GENMASK(8, 3) +#define SC2731_TERMINATION_VOL_CAL_SHIFT 3 +#define SC2731_TERMINATION_CUR_MASK GENMASK(2, 0) + +#define SC2731_CC_EN BIT(13) +#define SC2731_CHARGER_PD BIT(0) + +/* SC2731_CHG_CFG1 register definition */ +#define SC2731_CUR_MASK GENMASK(5, 0) + +/* SC2731_CHG_CFG5 register definition */ +#define SC2731_CUR_LIMIT_SHIFT 8 +#define SC2731_CUR_LIMIT_MASK GENMASK(9, 8) + +/* Default current definition (unit is mA) */ +#define SC2731_CURRENT_LIMIT_100 100 +#define SC2731_CURRENT_LIMIT_500 500 +#define SC2731_CURRENT_LIMIT_900 900 +#define SC2731_CURRENT_LIMIT_2000 2000 +#define SC2731_CURRENT_PRECHG 450 +#define SC2731_CURRENT_STEP 50 + +struct sc2731_charger_info { + struct device *dev; + struct regmap *regmap; + struct usb_phy *usb_phy; + struct notifier_block usb_notify; + struct power_supply *psy_usb; + struct mutex lock; + bool charging; + u32 base; +}; + +static void sc2731_charger_stop_charge(struct sc2731_charger_info *info) +{ + regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_CC_EN, 0); + + regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_CHARGER_PD, SC2731_CHARGER_PD); +} + +static int sc2731_charger_start_charge(struct sc2731_charger_info *info) +{ + int ret; + + /* Enable charger constant current mode */ + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_CC_EN, SC2731_CC_EN); + if (ret) + return ret; + + /* Start charging */ + return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_CHARGER_PD, 0); +} + +static int sc2731_charger_set_current_limit(struct sc2731_charger_info *info, + u32 limit) +{ + u32 val; + + if (limit <= SC2731_CURRENT_LIMIT_100) + val = 0; + else if (limit <= SC2731_CURRENT_LIMIT_500) + val = 3; + else if (limit <= SC2731_CURRENT_LIMIT_900) + val = 2; + else + val = 1; + + return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG5, + SC2731_CUR_LIMIT_MASK, + val << SC2731_CUR_LIMIT_SHIFT); +} + +static int sc2731_charger_set_current(struct sc2731_charger_info *info, u32 cur) +{ + u32 val; + int ret; + + if (cur > SC2731_CURRENT_LIMIT_2000) + cur = SC2731_CURRENT_LIMIT_2000; + else if (cur < SC2731_CURRENT_PRECHG) + cur = SC2731_CURRENT_PRECHG; + + /* Calculate the step value, each step is 50 mA */ + val = (cur - SC2731_CURRENT_PRECHG) / SC2731_CURRENT_STEP; + + /* Set pre-charge current as 450 mA */ + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_PRECHG_RNG_MASK, + 0x3 << SC2731_PRECHG_RNG_SHIFT); + if (ret) + return ret; + + return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG1, + SC2731_CUR_MASK, val); +} + +static int sc2731_charger_get_status(struct sc2731_charger_info *info) +{ + u32 val; + int ret; + + ret = regmap_read(info->regmap, SC2731_CHARGE_STATUS, &val); + if (ret) + return ret; + + if (val & SC2731_CHARGE_FULL) + return POWER_SUPPLY_STATUS_FULL; + + return POWER_SUPPLY_STATUS_CHARGING; +} + +static int sc2731_charger_get_current(struct sc2731_charger_info *info, + u32 *cur) +{ + int ret; + u32 val; + + ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG1, &val); + if (ret) + return ret; + + val &= SC2731_CUR_MASK; + *cur = val * SC2731_CURRENT_STEP + SC2731_CURRENT_PRECHG; + + return 0; +} + +static int sc2731_charger_get_current_limit(struct sc2731_charger_info *info, + u32 *cur) +{ + int ret; + u32 val; + + ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG5, &val); + if (ret) + return ret; + + val = (val & SC2731_CUR_LIMIT_MASK) >> SC2731_CUR_LIMIT_SHIFT; + + switch (val) { + case 0: + *cur = SC2731_CURRENT_LIMIT_100; + break; + + case 1: + *cur = SC2731_CURRENT_LIMIT_2000; + break; + + case 2: + *cur = SC2731_CURRENT_LIMIT_900; + break; + + case 3: + *cur = SC2731_CURRENT_LIMIT_500; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int +sc2731_charger_usb_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct sc2731_charger_info *info = power_supply_get_drvdata(psy); + int ret; + + mutex_lock(&info->lock); + + if (!info->charging) { + mutex_unlock(&info->lock); + return -ENODEV; + } + + switch (psp) { + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = sc2731_charger_set_current(info, val->intval / 1000); + if (ret < 0) + dev_err(info->dev, "set charge current failed\n"); + break; + + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + ret = sc2731_charger_set_current_limit(info, + val->intval / 1000); + if (ret < 0) + dev_err(info->dev, "set input current limit failed\n"); + break; + + default: + ret = -EINVAL; + } + + mutex_unlock(&info->lock); + return ret; +} + +static int sc2731_charger_usb_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct sc2731_charger_info *info = power_supply_get_drvdata(psy); + int ret = 0; + u32 cur; + + mutex_lock(&info->lock); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (info->charging) + val->intval = sc2731_charger_get_status(info); + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + if (!info->charging) { + val->intval = 0; + } else { + ret = sc2731_charger_get_current(info, &cur); + if (ret) + goto out; + + val->intval = cur * 1000; + } + break; + + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + if (!info->charging) { + val->intval = 0; + } else { + ret = sc2731_charger_get_current_limit(info, &cur); + if (ret) + goto out; + + val->intval = cur * 1000; + } + break; + + default: + ret = -EINVAL; + } + +out: + mutex_unlock(&info->lock); + return ret; +} + +static int sc2731_charger_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + ret = 1; + break; + + default: + ret = 0; + } + + return ret; +} + +static enum power_supply_property sc2731_usb_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, +}; + +static const struct power_supply_desc sc2731_charger_desc = { + .name = "sc2731_charger", + .type = POWER_SUPPLY_TYPE_USB, + .properties = sc2731_usb_props, + .num_properties = ARRAY_SIZE(sc2731_usb_props), + .get_property = sc2731_charger_usb_get_property, + .set_property = sc2731_charger_usb_set_property, + .property_is_writeable = sc2731_charger_property_is_writeable, +}; + +static int sc2731_charger_usb_change(struct notifier_block *nb, + unsigned long limit, void *data) +{ + struct sc2731_charger_info *info = + container_of(nb, struct sc2731_charger_info, usb_notify); + int ret = 0; + + mutex_lock(&info->lock); + + if (limit > 0) { + /* set current limitation and start to charge */ + ret = sc2731_charger_set_current_limit(info, limit); + if (ret) + goto out; + + ret = sc2731_charger_set_current(info, limit); + if (ret) + goto out; + + ret = sc2731_charger_start_charge(info); + if (ret) + goto out; + + info->charging = true; + } else { + /* Stop charging */ + info->charging = false; + sc2731_charger_stop_charge(info); + } + +out: + mutex_unlock(&info->lock); + return ret; +} + +static int sc2731_charger_hw_init(struct sc2731_charger_info *info) +{ + struct power_supply_battery_info bat_info = { }; + u32 term_currrent, term_voltage, cur_val, vol_val; + int ret; + + /* Enable charger module */ + ret = regmap_update_bits(info->regmap, SC2731_MODULE_EN1, + SC2731_CHARGE_EN, SC2731_CHARGE_EN); + if (ret) + return ret; + + ret = power_supply_get_battery_info(info->psy_usb, &bat_info); + if (ret) { + dev_warn(info->dev, "no battery information is supplied\n"); + + /* + * If no battery information is supplied, we should set + * default charge termination current to 120 mA, and default + * charge termination voltage to 4.35V. + */ + cur_val = 0x2; + vol_val = 0x1; + } else { + term_currrent = bat_info.charge_term_current_ua / 1000; + + if (term_currrent <= 90) + cur_val = 0; + else if (term_currrent >= 265) + cur_val = 0x7; + else + cur_val = ((term_currrent - 90) / 25) + 1; + + term_voltage = bat_info.constant_charge_voltage_max_uv / 1000; + + if (term_voltage > 4500) + term_voltage = 4500; + + if (term_voltage > 4200) + vol_val = (term_voltage - 4200) / 100; + else + vol_val = 0; + } + + /* Set charge termination current */ + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG2, + SC2731_TERMINATION_CUR_MASK, cur_val); + if (ret) + goto error; + + /* Set charge termination voltage */ + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_TERMINATION_VOL_MASK | + SC2731_TERMINATION_VOL_CAL_MASK, + (vol_val << SC2731_TERMINATION_VOL_SHIFT) | + (0x6 << SC2731_TERMINATION_VOL_CAL_SHIFT)); + if (ret) + goto error; + + return 0; + +error: + regmap_update_bits(info->regmap, SC2731_MODULE_EN1, SC2731_CHARGE_EN, 0); + return ret; +} + +static int sc2731_charger_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct sc2731_charger_info *info; + struct power_supply_config charger_cfg = { }; + int ret; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + mutex_init(&info->lock); + info->dev = &pdev->dev; + + info->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!info->regmap) { + dev_err(&pdev->dev, "failed to get charger regmap\n"); + return -ENODEV; + } + + ret = of_property_read_u32(np, "reg", &info->base); + if (ret) { + dev_err(&pdev->dev, "failed to get register address\n"); + return -ENODEV; + } + + charger_cfg.drv_data = info; + charger_cfg.of_node = np; + info->psy_usb = devm_power_supply_register(&pdev->dev, + &sc2731_charger_desc, + &charger_cfg); + if (IS_ERR(info->psy_usb)) { + dev_err(&pdev->dev, "failed to register power supply\n"); + return PTR_ERR(info->psy_usb); + } + + ret = sc2731_charger_hw_init(info); + if (ret) + return ret; + + info->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "phys", 0); + if (IS_ERR(info->usb_phy)) { + dev_err(&pdev->dev, "failed to find USB phy\n"); + return PTR_ERR(info->usb_phy); + } + + info->usb_notify.notifier_call = sc2731_charger_usb_change; + ret = usb_register_notifier(info->usb_phy, &info->usb_notify); + if (ret) { + dev_err(&pdev->dev, "failed to register notifier: %d\n", ret); + return ret; + } + + return 0; +} + +static int sc2731_charger_remove(struct platform_device *pdev) +{ + struct sc2731_charger_info *info = platform_get_drvdata(pdev); + + usb_unregister_notifier(info->usb_phy, &info->usb_notify); + + return 0; +} + +static const struct of_device_id sc2731_charger_of_match[] = { + { .compatible = "sprd,sc2731-charger", }, + { } +}; + +static struct platform_driver sc2731_charger_driver = { + .driver = { + .name = "sc2731-charger", + .of_match_table = sc2731_charger_of_match, + }, + .probe = sc2731_charger_probe, + .remove = sc2731_charger_remove, +}; + +module_platform_driver(sc2731_charger_driver); + +MODULE_DESCRIPTION("Spreadtrum SC2731 Charger Driver"); +MODULE_LICENSE("GPL v2");