diff mbox series

[V2,1/4] dt-bindings: power: supply: axp20x-battery: Add x-powers,no-thermistor

Message ID 20250204155835.161973-2-macroalpha82@gmail.com
State New
Headers show
Series [V2,1/4] dt-bindings: power: supply: axp20x-battery: Add x-powers,no-thermistor | expand

Commit Message

Chris Morgan Feb. 4, 2025, 3:58 p.m. UTC 
From: Chris Morgan <macromorgan@hotmail.com>

Add the vendor specific boolean property of x-powers,no-thermistor.
This property optionally describes hardware where no thermistor is
present on the battery and is specific to the AXP717. In rare
circumstances this value can be set incorrectly in the efuse of the
PMIC, and if it is not hard-coded the device will fail to charge.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../x-powers,axp20x-battery-power-supply.yaml | 20 ++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
index 5ccd375eb294..3504c76a01d8 100644
--- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
@@ -14,9 +14,6 @@  maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Sebastian Reichel <sre@kernel.org>
 
-allOf:
-  - $ref: power-supply.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -35,7 +32,24 @@  properties:
       this gauge.
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  x-powers,no-thermistor:
+    type: boolean
+    description: Indicates that no thermistor is connected to the TS pin
+
 required:
   - compatible
 
+allOf:
+  - $ref: power-supply.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - x-powers,axp717-battery-power-supply
+    then:
+      properties:
+        x-powers,no-thermistor: false
+
 additionalProperties: false