diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index bcadf11414c8a41d6fc99d03586d55c26d0a6a0f..783ba9c6a81cdc560b8c901d383c3c4d55eedbc7 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3361,8 +3361,8 @@ lpfc_block_mgmt_io(struct lpfc_hba *phba, int mbx_action)
 		/* Determine how long we might wait for the active mailbox
 		 * command to be gracefully completed by firmware.
 		 */
-		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
-				phba->sli.mbox_active) * 1000) + jiffies;
+		timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba,
+				phba->sli.mbox_active)) + jiffies;
 	}
 	spin_unlock_irqrestore(&phba->hbalock, iflag);
 
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 055ed632c14df51376126a285df728269ca1da6c..f0158fc00f783239db615b0978b6785de064535f 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -5645,9 +5645,8 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	 * cmd_flag is set to LPFC_DRIVER_ABORTED before we wait
 	 * for abort to complete.
 	 */
-	wait_event_timeout(waitq,
-			  (lpfc_cmd->pCmd != cmnd),
-			   msecs_to_jiffies(2*vport->cfg_devloss_tmo*1000));
+	wait_event_timeout(waitq, (lpfc_cmd->pCmd != cmnd),
+			   secs_to_jiffies(2*vport->cfg_devloss_tmo));
 
 	spin_lock(&lpfc_cmd->buf_lock);
 
@@ -5911,7 +5910,7 @@ lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct fc_rport *rport)
 	 * If target is not in a MAPPED state, delay until
 	 * target is rediscovered or devloss timeout expires.
 	 */
-	later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+	later = secs_to_jiffies(2 * vport->cfg_devloss_tmo) + jiffies;
 	while (time_after(later, jiffies)) {
 		if (!pnode)
 			return FAILED;
@@ -5957,7 +5956,7 @@ lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id,
 		lpfc_sli_abort_taskmgmt(vport,
 					&phba->sli.sli3_ring[LPFC_FCP_RING],
 					tgt_id, lun_id, context);
-	later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+	later = secs_to_jiffies(2 * vport->cfg_devloss_tmo) + jiffies;
 	while (time_after(later, jiffies) && cnt) {
 		schedule_timeout_uninterruptible(msecs_to_jiffies(20));
 		cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
@@ -6137,8 +6136,7 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
 			wait_event_timeout(waitq,
 					   !test_bit(NLP_WAIT_FOR_LOGO,
 						     &pnode->save_flags),
-					   msecs_to_jiffies(dev_loss_tmo *
-							    1000));
+					   secs_to_jiffies(dev_loss_tmo));
 
 			if (test_and_clear_bit(NLP_WAIT_FOR_LOGO,
 					       &pnode->save_flags))
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 3fd9723cd271c8a024b6f34e583668e973404e6f..3ccc444c018c51f7c78a8acdb9d12ead8697fbcb 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -9504,8 +9504,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
 			goto out_not_finished;
 		}
 		/* timeout active mbox command */
-		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox) *
-					   1000);
+		timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox));
 		mod_timer(&psli->mbox_tmo, jiffies + timeout);
 	}
 
@@ -9629,8 +9628,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
 						       drvr_flag);
 			goto out_not_finished;
 		}
-		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox) *
-							1000) + jiffies;
+		timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox)) + jiffies;
 		i = 0;
 		/* Wait for command to complete */
 		while (((word0 & OWN_CHIP) == OWN_CHIP) ||
@@ -9756,9 +9754,8 @@ lpfc_sli4_async_mbox_block(struct lpfc_hba *phba)
 	 * command to be gracefully completed by firmware.
 	 */
 	if (phba->sli.mbox_active)
-		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
-						phba->sli.mbox_active) *
-						1000) + jiffies;
+		timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba,
+						phba->sli.mbox_active)) + jiffies;
 	spin_unlock_irq(&phba->hbalock);
 
 	/* Make sure the mailbox is really active */
@@ -9881,8 +9878,7 @@ lpfc_sli4_wait_bmbx_ready(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 		}
 	}
 
-	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
-				   * 1000) + jiffies;
+	timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)) + jiffies;
 
 	do {
 		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
@@ -13159,7 +13155,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
 	retval = lpfc_sli_issue_iocb(phba, ring_number, piocb,
 				     SLI_IOCB_RET_IOCB);
 	if (retval == IOCB_SUCCESS) {
-		timeout_req = msecs_to_jiffies(timeout * 1000);
+		timeout_req = secs_to_jiffies(timeout);
 		timeleft = wait_event_timeout(done_q,
 				lpfc_chk_iocb_flg(phba, piocb, LPFC_IO_WAKE),
 				timeout_req);
@@ -13275,8 +13271,7 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
 	/* now issue the command */
 	retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
 	if (retval == MBX_BUSY || retval == MBX_SUCCESS) {
-		wait_for_completion_timeout(&mbox_done,
-					    msecs_to_jiffies(timeout * 1000));
+		wait_for_completion_timeout(&mbox_done, secs_to_jiffies(timeout));
 
 		spin_lock_irqsave(&phba->hbalock, flag);
 		pmboxq->ctx_u.mbox_wait = NULL;
@@ -13336,9 +13331,8 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba, int mbx_action)
 		 * command to be gracefully completed by firmware.
 		 */
 		if (phba->sli.mbox_active)
-			timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
-						phba->sli.mbox_active) *
-						1000) + jiffies;
+			timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba,
+						phba->sli.mbox_active)) + jiffies;
 		spin_unlock_irq(&phba->hbalock);
 
 		/* Enable softirqs again, done with phba->hbalock */
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 3d70cc5175730b31eeaf46c89d65c0dc09367d44..cc56a73343195a263c307fab6870a0012899060a 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -246,7 +246,7 @@ static void lpfc_discovery_wait(struct lpfc_vport *vport)
 	 * fabric RA_TOV value and dev_loss tmo.  The driver's
 	 * devloss_tmo is 10 giving this loop a 3x multiplier minimally.
 	 */
-	wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000);
+	wait_time_max = secs_to_jiffies((phba->fc_ratov * 3) + 3);
 	wait_time_max += jiffies;
 	start_time = jiffies;
 	while (time_before(jiffies, wait_time_max)) {
