diff mbox series

[15/16] arm64: dts: renesas: rzg3s-smarc: Enable USB support

Message ID 20240822152801.602318-16-claudiu.beznea.uj@bp.renesas.com
State New
Headers show
Series Add initial USB support for the Renesas RZ/G3S SoC | expand

Commit Message

Claudiu Beznea Aug. 22, 2024, 3:28 p.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Enable USB support (host, device, USB PHYs and sysc).

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi | 61 ++++++++++++++++++++
 1 file changed, 61 insertions(+)

Comments

Geert Uytterhoeven Oct. 8, 2024, 3:16 p.m. UTC | #1 
Hi Claudiu,

On Thu, Aug 22, 2024 at 5:28 PM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Enable USB support (host, device, USB PHYs and sysc).
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Thanks for your patch!

> --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
> +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
> @@ -144,3 +188,20 @@ &sdhi1 {
>         max-frequency = <125000000>;
>         status = "okay";
>  };
> +
> +&sysc {
> +       status = "okay";
> +};
> +

To avoid regressions (/sys/devices/soc0/ disappearing), enabling sysc
is a dependency for "[PATCH 05/16] soc: renesas: sysc: Move RZ/G3S
SoC detection on SYSC driver", so I think it makes sense to change
its status to "okay" in r9a08g045.dtsi instead, and spin that off into
its own patch.  I am not super-worried, so doing the driver and DTS
changes in separate patches should be fine, as long as they meet each
other in next or upstream.

The rest LGTM.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
index deb2ad37bb2e..fd9355936803 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
@@ -66,6 +66,29 @@  vccq_sdhi1: regulator-vccq-sdhi1 {
 	};
 };
 
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
 &pinctrl {
 	key-1-gpio-hog {
 		gpio-hog;
@@ -124,6 +147,27 @@  cd {
 			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
 		};
 	};
+
+	usb0_pins: usb0 {
+		peri {
+			pinmux = <RZG2L_PORT_PINMUX(5, 0, 1)>, /* VBUS */
+				 <RZG2L_PORT_PINMUX(5, 2, 1)>; /* OVC */
+		};
+
+		otg {
+			pinmux = <RZG2L_PORT_PINMUX(5, 3, 1)>; /* OTG_ID */
+			bias-pull-up;
+		};
+	};
+
+	usb1_pins: usb1 {
+		pinmux = <RZG2L_PORT_PINMUX(5, 4, 5)>, /* OVC */
+			 <RZG2L_PORT_PINMUX(6, 0, 1)>; /* VBUS */
+	};
+};
+
+&phyrst {
+	status = "okay";
 };
 
 &scif0 {
@@ -144,3 +188,20 @@  &sdhi1 {
 	max-frequency = <125000000>;
 	status = "okay";
 };
+
+&sysc {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	vbus-supply = <&usb0_vbus_otg>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};