@@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-gameforce-ace.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb
new file mode 100644
@@ -0,0 +1,1315 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588s.dtsi"
+
+/ {
+ model = "Gameforce Ace";
+ chassis-type = "handset";
+ compatible = "gameforce,ace", "rockchip,rk3588s";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc_keys: adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <60>;
+
+ button-vol-up {
+ label = "VOLUMEUP";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <17000>;
+ };
+
+ button-vol-down {
+ label = "VOLUMEDOWN";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <417000>;
+ };
+ };
+
+ /* Joystick range values based on hardware observation. */
+ adc_joystick: adc-joystick {
+ compatible = "adc-joystick";
+ #address-cells = <1>;
+ io-channels = <&saradc 2>, <&saradc 3>,
+ <&saradc 4>, <&saradc 5>;
+ poll-interval = <60>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ abs-flat = <40>;
+ abs-fuzz = <30>;
+ abs-range = <0 4095>;
+ linux,code = <ABS_RX>;
+ };
+
+ axis@1 {
+ reg = <1>;
+ abs-flat = <40>;
+ abs-fuzz = <30>;
+ abs-range = <0 4095>;
+ linux,code = <ABS_RY>;
+ };
+
+ axis@2 {
+ reg = <2>;
+ abs-flat = <40>;
+ abs-fuzz = <30>;
+ abs-range = <0 4095>;
+ linux,code = <ABS_Y>;
+ };
+
+ axis@3 {
+ reg = <3>;
+ abs-flat = <40>;
+ abs-fuzz = <30>;
+ abs-range = <0 4095>;
+ linux,code = <ABS_X>;
+ };
+ };
+
+ /* Trigger range values based on hardware observation. */
+ adc_triggers: adc-trigger {
+ compatible = "adc-joystick";
+ #address-cells = <1>;
+ io-channels = <&ti_adc 6>,
+ <&ti_adc 7>;
+ poll-interval = <60>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ abs-flat = <15>;
+ abs-fuzz = <15>;
+ abs-range = <890 1530>;
+ linux,code = <ABS_HAT2X>;
+ };
+
+ axis@1 {
+ reg = <1>;
+ abs-flat = <15>;
+ abs-fuzz = <15>;
+ abs-range = <1010 1550>;
+ linux,code = <ABS_HAT2Y>;
+ };
+ };
+
+ amp_headphone: headphone-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&headphone_amplifier_en>;
+ pinctrl-names = "default";
+ sound-name-prefix = "Headphones Amplifier";
+ };
+
+ amp_speaker: speaker-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&speaker_amplifier_en>;
+ pinctrl-names = "default";
+ sound-name-prefix = "Speaker Amplifier";
+ VCC-supply = <&vcc5v0_spk>;
+ };
+
+ analog-sound {
+ compatible = "simple-audio-card";
+ pinctrl-0 = <&hp_detect>;
+ pinctrl-names = "default";
+ simple-audio-card,aux-devs = <&_headphone>, <&_speaker>;
+ simple-audio-card,bitclock-master = <&masterdai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&masterdai>;
+ simple-audio-card,hp-det-gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "rockchip,es8388-codec";
+ simple-audio-card,pin-switches = "Headphones", "Speaker";
+ simple-audio-card,routing =
+ "Speaker Amplifier INL", "LOUT2",
+ "Speaker Amplifier INR", "ROUT2",
+ "Speaker", "Speaker Amplifier OUTL",
+ "Speaker", "Speaker Amplifier OUTR",
+ "Headphones Amplifier INL", "LOUT1",
+ "Headphones Amplifier INR", "ROUT1",
+ "Headphones", "Headphones Amplifier OUTL",
+ "Headphones", "Headphones Amplifier OUTR",
+ "LINPUT1", "Microphone Jack",
+ "RINPUT1", "Microphone Jack",
+ "LINPUT2", "Onboard Microphone",
+ "RINPUT2", "Onboard Microphone";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone",
+ "Headphone", "Headphones",
+ "Speaker", "Speaker";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0_8ch>;
+ };
+
+ masterdai: simple-audio-card,codec {
+ sound-dai = <&es8388>;
+ system-clock-frequency = <12288000>;
+ };
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <3700000>;
+ constant-charge-current-max-microamp = <2500000>;
+ constant-charge-voltage-max-microvolt = <8750000>;
+ voltage-min-design-microvolt = <7400000>;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&btn_pins_ctrl>;
+ pinctrl-names = "default";
+
+ button-a {
+ gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+ label = "EAST";
+ linux,code = <BTN_EAST>;
+ };
+
+ button-b {
+ gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "SOUTH";
+ linux,code = <BTN_SOUTH>;
+ };
+
+ button-down {
+ gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
+ label = "DPAD-DOWN";
+ linux,code = <BTN_DPAD_DOWN>;
+ };
+
+ button-home {
+ gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "FUNCTION";
+ linux,code = <BTN_MODE>;
+ };
+
+ button-l1 {
+ gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+ label = "L1";
+ linux,code = <BTN_TL>;
+ };
+
+ button-left {
+ gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
+ label = "DPAD-LEFT";
+ linux,code = <BTN_DPAD_LEFT>;
+ };
+
+ button-menu {
+ gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
+ label = "HOME";
+ linux,code = <KEY_HOME>;
+ };
+
+ button-r1 {
+ gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "R1";
+ linux,code = <BTN_TR>;
+ };
+
+ button-right {
+ gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "DPAD-RIGHT";
+ linux,code = <BTN_DPAD_RIGHT>;
+ };
+
+ button-select {
+ gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_LOW>;
+ label = "SELECT";
+ linux,code = <BTN_SELECT>;
+ };
+
+ button-start {
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ label = "START";
+ linux,code = <BTN_START>;
+ };
+
+ button-thumbl {
+ gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
+ label = "THUMBL";
+ linux,code = <BTN_THUMBL>;
+ };
+
+ button-thumbr {
+ gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+ label = "THUMBR";
+ linux,code = <BTN_THUMBR>;
+ };
+
+ button-up {
+ gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "DPAD-UP";
+ linux,code = <BTN_DPAD_UP>;
+ };
+
+ button-x {
+ gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "NORTH";
+ linux,code = <BTN_NORTH>;
+ };
+
+ button-y {
+ gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_LOW>;
+ label = "WEST";
+ linux,code = <BTN_WEST>;
+ };
+ };
+
+ gpio_leds: gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ green_led: led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ red_led: led-1 {
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_CHARGING;
+ };
+ };
+
+ pwm_fan: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-levels = <0 120 150 180 210 240 255>;
+ fan-supply = <&vcc5v0_sys>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PB2 IRQ_TYPE_EDGE_RISING>;
+ pulses-per-revolution = <4>;
+ pwms = <&pwm12 0 50000 PWM_POLARITY_INVERTED>;
+ };
+
+ pwm_gpio33: pwm-33 {
+ compatible = "pwm-gpio";
+ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&vib_right_h>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ };
+
+ pwm_gpio132: pwm-132 {
+ compatible = "pwm-gpio";
+ gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&vib_left_h>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clock-names = "ext_clock";
+ clocks = <&rtc_hym8563>;
+ pinctrl-0 = <&wifi_enable_h>;
+ pinctrl-names = "default";
+ post-power-on-delay-ms = <200>;
+ power-off-delay-us = <5000000>;
+ reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1100000>;
+ regulator-min-microvolt = <1100000>;
+ regulator-name = "vcc_1v1_nldo_s3";
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_lcd0_n: vcc3v3-lcd0-n-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&vcc_lcd_h>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc3v3_lcd0_n";
+ vin-supply = <&vcc_3v3_s3>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&sd_s0_pwr>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "vcc_3v3_sd_s0";
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc5v0_spk: vcc5v0-spk-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&vcc5v0_spk_pwr>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "vcc5v0_spk";
+ vin-supply = <&vcc5v0_sys>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "vcc5v0_sys";
+ };
+
+ vibrator_l: vibrator-l {
+ compatible = "pwm-vibrator";
+ pwm-names = "enable";
+ pwms = <&pwm_gpio132 0 20000000 0>;
+ };
+
+ vibrator_r: vibrator-r {
+ compatible = "pwm-vibrator";
+ pwm-names = "enable";
+ pwms = <&pwm_gpio33 0 20000000 0>;
+ };
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0m2_xfer>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microvolt = <550000>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-ramp-delay = <2300>;
+ fcs,suspend-voltage-selector = <1>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microvolt = <550000>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-ramp-delay = <2300>;
+ fcs,suspend-voltage-selector = <1>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ regulator-max-microvolt = <950000>;
+ regulator-min-microvolt = <550000>;
+ regulator-name = "vdd_npu_s0";
+ regulator-ramp-delay = <2300>;
+ fcs,suspend-voltage-selector = <1>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ touchscreen@14 {
+ compatible = "goodix,gt911";
+ reg = <0x14>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
+ irq-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&touch_int>, <&touch_rst>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
+ touchscreen-inverted-x;
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+ touchscreen-swapped-x-y;
+ };
+};
+
+&i2c4 {
+ pinctrl-0 = <&i2c4m2_xfer>;
+ status = "okay";
+
+ ti_adc: adc@48 {
+ compatible = "ti,ads1015";
+ reg = <0x48>;
+ #address-cells = <1>;
+ #io-channel-cells = <1>;
+ #size-cells = <0>;
+
+ channel@4 {
+ reg = <4>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ };
+
+ channel@7 {
+ reg = <7>;
+ };
+ };
+
+ imu@68 {
+ compatible = "invensense,mpu6880";
+ reg = <0x68>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&i2c6 {
+ pinctrl-0 = <&i2c6m3_xfer>;
+ status = "okay";
+
+ /*
+ * vbus-supply provided by ti,bq27503 which does not yet have
+ * a driver. Leaving unpopulated until a driver can be written.
+ */
+ fusb302: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PC7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&usbc0_int>;
+ pinctrl-names = "default";
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
+ PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_orien_sw: endpoint {
+ remote-endpoint = <&usbdp_phy0_orientation_switch>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usbc0_role_sw: endpoint {
+ remote-endpoint = <&dwc3_0_role_switch>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dp_altmode_mux: endpoint {
+ remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ rtc_hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&hym8563_int>, <&clk32k_in>;
+ pinctrl-names = "default";
+ wakeup-source;
+ };
+
+ /* Battery profile from BSP device tree. */
+ cw2015@62 {
+ compatible = "cellwise,cw2015";
+ reg = <0x62>;
+
+ cellwise,battery-profile = /bits/ 8
+ <0x18 0x0A 0x76 0x6A 0x6A 0x6A 0x68 0x66
+ 0x62 0x5E 0x5A 0x58 0x5F 0x59 0x46 0x3D
+ 0x35 0x2D 0x28 0x21 0x29 0x38 0x44 0x50
+ 0x1A 0x85 0x07 0xAE 0x14 0x28 0x48 0x56
+ 0x66 0x66 0x66 0x6A 0x3E 0x1A 0x6C 0x3D
+ 0x09 0x38 0x1A 0x49 0x7B 0x96 0xA2 0x15
+ 0x3B 0x77 0x9A 0xB1 0x80 0x87 0xB0 0xCB
+ 0x2F 0x00 0x64 0xA5 0xB5 0x1C 0xF0 0x49>;
+ cellwise,dual-cell;
+ cellwise,monitor-interval-ms = <5000>;
+ monitored-battery = <&battery>;
+ power-supplies = <&fusb302>;
+ status = "okay";
+ };
+
+ /*
+ * At 0x6b there is a Texas Instruments bq25703 for which no
+ * driver currently exists. The physical USB-C port is wired
+ * into the fusb302, and the power lines are run through the
+ * bq25703 which is used to either charge the battery when the
+ * port is used as a sink or power the port when it is used as
+ * a source.
+ */
+};
+
+&i2c7 {
+ status = "okay";
+
+ es8388: audio-codec@11 {
+ compatible = "everest,es8388";
+ reg = <0x11>;
+ assigned-clock-rates = <12288000>;
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ AVDD-supply = <&vcc_3v3_s3>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ DVDD-supply = <&vcc_1v8_s3>;
+ HPVDD-supply = <&vcc_3v3_s3>;
+ PVDD-supply = <&vcc_1v8_s3>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+};
+
+&package_thermal {
+ polling-delay = <1000>;
+
+ trips {
+ package_fan0: package-fan0 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ package_fan1: package-fan1 {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&package_fan0>;
+ cooling-device = <&pwm_fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map2 {
+ trip = <&package_fan1>;
+ cooling-device = <&pwm_fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+/*
+ * Attempts to use an M.2 SATA in this slot worked intermittently
+ * with the correct nodes enabled in device-tree, but eventually
+ * resulted in a destroyed board. Advise caution.
+ */
+&pcie2x1l1 {
+ pinctrl-0 = <&pcie_rst>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pinctrl {
+ audio-amplifier {
+ hp_detect: headphone-detect {
+ rockchip,pins =
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ headphone_amplifier_en: headphone-amplifier-en {
+ rockchip,pins =
+ <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ speaker_amplifier_en: speaker-amplifier-en {
+ rockchip,pins =
+ <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins =
+ <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins =
+ <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins =
+ <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ charger {
+ charger_int_h: charger-int-h {
+ rockchip,pins =
+ <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins =
+ <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ gpio-btns {
+ btn_pins_ctrl: btn-pins-ctrl {
+ rockchip,pins =
+ <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ gpio-leds {
+ led_pins: led-pins {
+ rockchip,pins =
+ <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pcie-pins {
+ pcie_rst: pcie-rst {
+ rockchip,pins =
+ <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sd-pwr {
+ sd_s0_pwr: sd-s0-pwr {
+ rockchip,pins =
+ <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ spk-pwr {
+ vcc5v0_spk_pwr: vcc5v0-spk-pwr {
+ rockchip,pins =
+ <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ touch {
+ touch_int: touch-int {
+ rockchip,pins =
+ <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ touch_rst: touch-rst {
+ rockchip,pins =
+ <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb-typec {
+ usbc0_int: usbc0-int {
+ rockchip,pins =
+ <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ vcc3v3-lcd {
+ vcc_lcd_h: vcc-lcd-h {
+ rockchip,pins =
+ <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ vibrator {
+ vib_left_h: vib-left-h {
+ rockchip,pins =
+ <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vib_right_h: vib-right-h {
+ rockchip,pins =
+ <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ wifi {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ wifi_host_wake_irq: wifi-host-wake-irq {
+ rockchip,pins =
+ <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm12 {
+ pinctrl-0 = <&pwm12m1_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+};
+
+&sdio {
+ #address-cells = <1>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ max-frequency = <150000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
+ sd-uhs-sdr104;
+ #size-cells = <0>;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-0 = <&wifi_host_wake_irq>;
+ pinctrl-names = "default";
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ no-sdio;
+ no-mmc;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_sd_s0>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&spi2 {
+ #address-cells = <1>;
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ num-cs = <1>;
+ pinctrl-0 = <&spi2m2_pins>, <&spi2m2_cs0>;
+ pinctrl-names = "default";
+ #size-cells = <0>;
+ status = "okay";
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ pinctrl-names = "default";
+ spi-max-frequency = <1000000>;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: dcdc-reg1 {
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <400>;
+ regulator-max-microvolt = <950000>;
+ regulator-min-microvolt = <550000>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: dcdc-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <950000>;
+ regulator-min-microvolt = <550000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_lit_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_logic_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <750000>;
+ regulator-min-microvolt = <675000>;
+ regulator-name = "vdd_logic_s0";
+ regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <950000>;
+ regulator-min-microvolt = <550000>;
+ regulator-name = "vdd_vdenc_s0";
+ regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_ddr_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <2000000>;
+ regulator-min-microvolt = <2000000>;
+ regulator-name = "vdd_2v0_pldo_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "avcc_1v8_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-name = "avdd_1v2_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vccio_sd_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3_pldo6: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3_pldo6";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <750000>;
+ regulator-min-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <850000>;
+ regulator-min-microvolt = <850000>;
+ regulator-name = "vdd_ddr_pll_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <837500>;
+ regulator-min-microvolt = <837500>;
+ regulator-name = "avdd_0v75_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_0v85_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+&uart9 {
+ pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rtc_hym8563>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB0 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_l>;
+ pinctrl-names = "default";
+ shutdown-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&usb_host0_xhci {
+ dr_mode = "otg";
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dwc3_0_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_role_sw>;
+ };
+ };
+};
+
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
+ rockchip,dp-lane-mux = <2 3>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_orientation_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_orien_sw>;
+ };
+
+ usbdp_phy0_dp_altmode_mux: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dp_altmode_mux>;
+ };
+ };
+};