diff mbox series

[V6,4/5] clk: qcom: videocc: Use HW_CTRL_TRIGGER for SM8250, SC7280 vcodec GDSC's

Message ID 20240619141413.7983-5-quic_jkona@quicinc.com
State Accepted
Commit 4c2aecac62a442327f1e770055ecc3d5f7894101
Headers show
Series Add control for switching back and forth to HW control | expand

Commit Message

Jagadeesh Kona June 19, 2024, 2:14 p.m. UTC
For Venus V6 variant SoCs(sm8250, sc7280), the venus driver uses the newly
introduced dev_pm_genpd_set_hwmode() API to switch the vcodec GDSC to
HW/SW control modes at runtime. Hence use HW_CTRL_TRIGGER flag for vcodec
GDSC's on sm8250, sc7280 to register the set_hwmode_dev & get_hwmode_dev
callbacks for vcodec GDSC and allow the GDSC mode to be changed using
dev_pm_genpd_set_hwmode() API.

Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/clk/qcom/videocc-sc7280.c | 2 +-
 drivers/clk/qcom/videocc-sm8250.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

Comments

Taniya Das June 21, 2024, 4:04 a.m. UTC | #1
On 6/19/2024 7:44 PM, Jagadeesh Kona wrote:
> For Venus V6 variant SoCs(sm8250, sc7280), the venus driver uses the newly
> introduced dev_pm_genpd_set_hwmode() API to switch the vcodec GDSC to
> HW/SW control modes at runtime. Hence use HW_CTRL_TRIGGER flag for vcodec
> GDSC's on sm8250, sc7280 to register the set_hwmode_dev & get_hwmode_dev
> callbacks for vcodec GDSC and allow the GDSC mode to be changed using
> dev_pm_genpd_set_hwmode() API.
> 
> Signed-off-by: Jagadeesh Kona<quic_jkona@quicinc.com>
> Signed-off-by: Abel Vesa<abel.vesa@linaro.org>
> ---
>   drivers/clk/qcom/videocc-sc7280.c | 2 +-
>   drivers/clk/qcom/videocc-sm8250.c | 4 ++--
>   2 files changed, 3 insertions(+), 3 deletions(-)

Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
diff mbox series

Patch

diff --git a/drivers/clk/qcom/videocc-sc7280.c b/drivers/clk/qcom/videocc-sc7280.c
index 317b325d6daf..88c90853cf6e 100644
--- a/drivers/clk/qcom/videocc-sc7280.c
+++ b/drivers/clk/qcom/videocc-sc7280.c
@@ -240,7 +240,7 @@  static struct gdsc mvs0_gdsc = {
 		.name = "mvs0_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
-	.flags = HW_CTRL | RETAIN_FF_ENABLE,
+	.flags = HW_CTRL_TRIGGER | RETAIN_FF_ENABLE,
 };
 
 static struct gdsc mvsc_gdsc = {
diff --git a/drivers/clk/qcom/videocc-sm8250.c b/drivers/clk/qcom/videocc-sm8250.c
index d7e0c32284c1..df479a69cddd 100644
--- a/drivers/clk/qcom/videocc-sm8250.c
+++ b/drivers/clk/qcom/videocc-sm8250.c
@@ -293,7 +293,7 @@  static struct gdsc mvs0_gdsc = {
 	.pd = {
 		.name = "mvs0_gdsc",
 	},
-	.flags = HW_CTRL,
+	.flags = HW_CTRL_TRIGGER,
 	.pwrsts = PWRSTS_OFF_ON,
 };
 
@@ -302,7 +302,7 @@  static struct gdsc mvs1_gdsc = {
 	.pd = {
 		.name = "mvs1_gdsc",
 	},
-	.flags = HW_CTRL,
+	.flags = HW_CTRL_TRIGGER,
 	.pwrsts = PWRSTS_OFF_ON,
 };