diff mbox series

[v10,06/19] ACPI: processor: Move checks and availability of acpi_processor earlier

Message ID 20240529133446.28446-7-Jonathan.Cameron@huawei.com
State Accepted
Commit cd9239660b8c0357a7338a33d40a429e48273e77
Headers show
Series ACPI/arm64: add support for virtual cpu hotplug | expand

Commit Message

Jonathan Cameron May 29, 2024, 1:34 p.m. UTC
Make the per_cpu(processors, cpu) entries available earlier so that
they are available in arch_register_cpu() as ARM64 will need access
to the acpi_handle to distinguish between acpi_processor_add()
and earlier registration attempts (which will fail as _STA cannot
be checked).

Reorder the remove flow to clear this per_cpu() after
arch_unregister_cpu() has completed, allowing it to be used in
there as well.

Note that on x86 for the CPU hotplug case, the pr->id prior to
acpi_map_cpu() may be invalid. Thus the per_cpu() structures
must be initialized after that call or after checking the ID
is valid (not hotplug path).

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

---
v10: Thanks To Rafael and Gavin for the same suggestion.
  - Make the acpi_process_set_per_cpu() function return an int
    (-EINVAL or 0 as appropriate), simplifying how it is used.
---
 drivers/acpi/acpi_processor.c | 88 +++++++++++++++++++++--------------
 1 file changed, 52 insertions(+), 36 deletions(-)
diff mbox series

Patch

diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index 16e36e55a560..0bc0419adf6b 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -183,8 +183,38 @@  static void __init acpi_pcc_cpufreq_init(void) {}
 #endif /* CONFIG_X86 */
 
 /* Initialization */
+static DEFINE_PER_CPU(void *, processor_device_array);
+
+static int acpi_processor_set_per_cpu(struct acpi_processor *pr,
+				      struct acpi_device *device)
+{
+	BUG_ON(pr->id >= nr_cpu_ids);
+
+	/*
+	 * Buggy BIOS check.
+	 * ACPI id of processors can be reported wrongly by the BIOS.
+	 * Don't trust it blindly
+	 */
+	if (per_cpu(processor_device_array, pr->id) != NULL &&
+	    per_cpu(processor_device_array, pr->id) != device) {
+		dev_warn(&device->dev,
+			 "BIOS reported wrong ACPI id %d for the processor\n",
+			 pr->id);
+		return -EINVAL;
+	}
+	/*
+	 * processor_device_array is not cleared on errors to allow buggy BIOS
+	 * checks.
+	 */
+	per_cpu(processor_device_array, pr->id) = device;
+	per_cpu(processors, pr->id) = pr;
+
+	return 0;
+}
+
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
-static int acpi_processor_hotadd_init(struct acpi_processor *pr)
+static int acpi_processor_hotadd_init(struct acpi_processor *pr,
+				      struct acpi_device *device)
 {
 	int ret;
 
@@ -198,8 +228,16 @@  static int acpi_processor_hotadd_init(struct acpi_processor *pr)
 	if (ret)
 		goto out;
 
+	ret = acpi_processor_set_per_cpu(pr, device);
+	if (ret) {
+		acpi_unmap_cpu(pr->id);
+		goto out;
+	}
+
 	ret = arch_register_cpu(pr->id);
 	if (ret) {
+		/* Leave the processor device array in place to detect buggy bios */
+		per_cpu(processors, pr->id) = NULL;
 		acpi_unmap_cpu(pr->id);
 		goto out;
 	}
@@ -217,7 +255,8 @@  static int acpi_processor_hotadd_init(struct acpi_processor *pr)
 	return ret;
 }
 #else
-static inline int acpi_processor_hotadd_init(struct acpi_processor *pr)
+static inline int acpi_processor_hotadd_init(struct acpi_processor *pr,
+					     struct acpi_device *device)
 {
 	return -ENODEV;
 }
@@ -232,6 +271,7 @@  static int acpi_processor_get_info(struct acpi_device *device)
 	acpi_status status = AE_OK;
 	static int cpu0_initialized;
 	unsigned long long value;
+	int ret;
 
 	acpi_processor_errata();
 
@@ -315,12 +355,12 @@  static int acpi_processor_get_info(struct acpi_device *device)
 	 *  NOTE: Even if the processor has a cpuid, it may not be present
 	 *  because cpuid <-> apicid mapping is persistent now.
 	 */
-	if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) {
-		int ret = acpi_processor_hotadd_init(pr);
-
-		if (ret)
-			return ret;
-	}
+	if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id))
+		ret = acpi_processor_hotadd_init(pr, device);
+	else
+		ret = acpi_processor_set_per_cpu(pr, device);
+	if (ret)
+		return ret;
 
 	/*
 	 * On some boxes several processors use the same processor bus id.
@@ -365,8 +405,6 @@  static int acpi_processor_get_info(struct acpi_device *device)
  * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc.
  * Such things have to be put in and set up by the processor driver's .probe().
  */
-static DEFINE_PER_CPU(void *, processor_device_array);
-
 static int acpi_processor_add(struct acpi_device *device,
 					const struct acpi_device_id *id)
 {
@@ -395,28 +433,6 @@  static int acpi_processor_add(struct acpi_device *device,
 	if (result) /* Processor is not physically present or unavailable */
 		goto err_clear_driver_data;
 
-	BUG_ON(pr->id >= nr_cpu_ids);
-
-	/*
-	 * Buggy BIOS check.
-	 * ACPI id of processors can be reported wrongly by the BIOS.
-	 * Don't trust it blindly
-	 */
-	if (per_cpu(processor_device_array, pr->id) != NULL &&
-	    per_cpu(processor_device_array, pr->id) != device) {
-		dev_warn(&device->dev,
-			"BIOS reported wrong ACPI id %d for the processor\n",
-			pr->id);
-		/* Give up, but do not abort the namespace scan. */
-		goto err_clear_driver_data;
-	}
-	/*
-	 * processor_device_array is not cleared on errors to allow buggy BIOS
-	 * checks.
-	 */
-	per_cpu(processor_device_array, pr->id) = device;
-	per_cpu(processors, pr->id) = pr;
-
 	dev = get_cpu_device(pr->id);
 	if (!dev) {
 		result = -ENODEV;
@@ -470,10 +486,6 @@  static void acpi_processor_remove(struct acpi_device *device)
 	device_release_driver(pr->dev);
 	acpi_unbind_one(pr->dev);
 
-	/* Clean up. */
-	per_cpu(processor_device_array, pr->id) = NULL;
-	per_cpu(processors, pr->id) = NULL;
-
 	cpu_maps_update_begin();
 	cpus_write_lock();
 
@@ -481,6 +493,10 @@  static void acpi_processor_remove(struct acpi_device *device)
 	arch_unregister_cpu(pr->id);
 	acpi_unmap_cpu(pr->id);
 
+	/* Clean up. */
+	per_cpu(processor_device_array, pr->id) = NULL;
+	per_cpu(processors, pr->id) = NULL;
+
 	cpus_write_unlock();
 	cpu_maps_update_done();