From patchwork Sat Jun 3 20:02:26 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Varshini Rajendran X-Patchwork-Id: 688964 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7E6A7C7EE2E for ; Sat, 3 Jun 2023 20:04:26 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229881AbjFCUEZ (ORCPT ); Sat, 3 Jun 2023 16:04:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47638 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229786AbjFCUET (ORCPT ); Sat, 3 Jun 2023 16:04:19 -0400 Received: from esa.microchip.iphmx.com (esa.microchip.iphmx.com [68.232.154.123]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4B43EE55; Sat, 3 Jun 2023 13:04:02 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1685822642; x=1717358642; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=ml1USQ1Kf69+ZTPyN/cgKQ7aDljJOZ1mI+h9P+UA0JA=; b=TNVPHJ1lnwlUnFytQ9LQs+UMr8/bNDwNuaiNe6Vbt8PaFLvh9IoBWn4f Fteook/OsK9V6cHBf2Bkgcnl0o42x8nsHGmdtfjlg5WwVmP2XFOlkHxZr g37DhMRIW8kv4KXztmNrkY2uD2yOa7hOGMuPQRJMB3L5d7+P39WNHeatc NeB8Nm5NxYpHTKKZD8uGLrnXtavo99ZbibA94OLsOwz+xvIHIrRpi+fav 9ut+blnjCkLHuQ1c11esbC8PoNI277l4KGwMCD7DWIunOuZhz6uXwhu4R ZdTmpkB8J+IA4OMVMiVKCmkLvn0RJLy7p4zq4IW9ZZ6PK4ZBuutAwwr3u A==; X-IronPort-AV: E=Sophos;i="6.00,216,1681196400"; d="scan'208";a="218711144" X-Amp-Result: SKIPPED(no attachment in message) Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa2.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 03 Jun 2023 13:04:01 -0700 Received: from chn-vm-ex04.mchp-main.com (10.10.85.152) by chn-vm-ex02.mchp-main.com (10.10.85.144) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.21; Sat, 3 Jun 2023 13:03:59 -0700 Received: from che-lt-i67070.amer.actel.com (10.10.115.15) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server id 15.1.2507.21 via Frontend Transport; Sat, 3 Jun 2023 13:03:47 -0700 From: Varshini Rajendran To: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , CC: , , , , , , Subject: [PATCH 04/21] ARM: dts: at91: sam9x7: add device tree for soc Date: Sun, 4 Jun 2023 01:32:26 +0530 Message-ID: <20230603200243.243878-5-varshini.rajendran@microchip.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230603200243.243878-1-varshini.rajendran@microchip.com> References: <20230603200243.243878-1-varshini.rajendran@microchip.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Add device tree file for SAM9X7 SoC family Signed-off-by: Varshini Rajendran [nicolas.ferre@microchip.com: add support for gmac to sam9x7] Signed-off-by: Nicolas Ferre [balamanikandan.gunasundar@microchip.com: Add device node csi2host and isc] Signed-off-by: Balamanikandan Gunasundar --- arch/arm/boot/dts/sam9x7.dtsi | 1333 +++++++++++++++++++++++++++++++++ 1 file changed, 1333 insertions(+) create mode 100644 arch/arm/boot/dts/sam9x7.dtsi diff --git a/arch/arm/boot/dts/sam9x7.dtsi b/arch/arm/boot/dts/sam9x7.dtsi new file mode 100644 index 000000000000..f98160182fe6 --- /dev/null +++ b/arch/arm/boot/dts/sam9x7.dtsi @@ -0,0 +1,1333 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family + * + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries + * + * Author: Varshini Rajendran + */ + +#include +#include +#include +#include +#include +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Microchip SAM9X7 SoC"; + compatible = "microchip,sam9x7"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + reg = <0>; + }; + }; + + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + sram: sram@300000 { + compatible = "mmio-sram"; + reg = <0x300000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x300000 0x10000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usb0: gadget@500000 { + compatible = "microchip,sam9x60-udc"; + reg = <0x500000 0x100000>, + <0xf803c000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>; + clock-names = "pclk", "hclk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; + assigned-clock-rates = <480000000>; + status = "disabled"; + }; + + ohci0: usb@600000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x600000 0x100000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; + clock-names = "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + ehci0: usb@700000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x700000 0x100000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "usb_clk", "ehci_clk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; + assigned-clock-rates = <480000000>; + status = "disabled"; + }; + + sdmmc0: sdio-host@80000000 { + compatible = "microchip,sam9x60-sdhci"; + reg = <0x80000000 0x300>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 12>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + + sdmmc1: sdio-host@90000000 { + compatible = "microchip,sam9x60-sdhci"; + reg = <0x90000000 0x300>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flx4: flexcom@f0000000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf0000000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0000000 0x800>; + status = "disabled"; + + uart4: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c4: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx5: flexcom@f0004000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf0004000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0004000 0x800>; + status = "disabled"; + + uart5: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + spi5: spi@400 { + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c5: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + dma0: dma-controller@f0008000 { + compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma"; + reg = <0xf0008000 0x1000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + clock-names = "dma_clk"; + status = "disabled"; + }; + + ssc: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(38))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(39))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; + clock-names = "pclk"; + }; + + gpu: gfx2d@f0018000 { + compatible = "microchip,sam9x60-gfx2d"; + reg = <0xf0018000 0x4000>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; + clock-names = "periph_clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2s: i2s@f001c000 { + compatible = "microchip,sam9x60-i2smcc"; + reg = <0xf001c000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + flx11: flexcom@f0020000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf0020000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0020000 0x800>; + status = "disabled"; + + uart11: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(22))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(23))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c11: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(22))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(23))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx12: flexcom@f0024000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf0024000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0024000 0x800>; + status = "disabled"; + + uart12: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(24))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(25))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c12: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(24))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(25))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + pit64b0: timer@f0028000 { + compatible = "microchip,sam9x60-pit64b"; + reg = <0xf0028000 0x100>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>; + clock-names = "pclk", "gclk"; + }; + + sha: sha@f002c000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xf002c000 0x100>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(34))>; + dma-names = "tx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + clock-names = "sha_clk"; + }; + + trng: trng@f0030000 { + compatible = "microchip,sam9x60-trng"; + reg = <0xf0030000 0x100>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + status = "disabled"; + }; + + aes: aes@f0034000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xf0034000 0x100>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(33))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + clock-names = "aes_clk"; + }; + + tdes: tdes@f0038000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xf0038000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(30))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; + clock-names = "tdes_clk"; + }; + + classd: classd@f003c000 { + compatible = "atmel,sama5d2-classd"; + reg = <0xf003c000 0x100>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(35))>; + dma-names = "tx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + pit64b1: timer@f0040000 { + compatible = "microchip,sam9x60-pit64b"; + reg = <0xf0040000 0x100>; + interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>; + clock-names = "pclk", "gclk"; + }; + + can0: can@f8000000 { + compatible = "bosch,m_can"; + reg = <0xf8000000 0x100>, <0x300000 0x7800>; + reg-names = "m_can", "message_ram"; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0 + 68 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>; + assigned-clock-rates = <480000000>, <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can1: can@f8004000 { + compatible = "bosch,m_can"; + reg = <0xf8004000 0x100>, <0x300000 0xbc00>; + reg-names = "m_can", "message_ram"; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0 + 69 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>; + assigned-clock-rates = <480000000>, <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + tcb: timer@f8008000 { + compatible = "microchip,sam9x60-tcb", "simple-mfd", "syscon"; + reg = <0xf8008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>; + clock-names = "t0_clk", "slow_clk"; + status = "disabled"; + }; + + flx6: flexcom@f8010000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8010000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8010000 0x800>; + status = "disabled"; + + uart6: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c6: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx7: flexcom@f8014000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8014000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8014000 0x800>; + status = "disabled"; + + uart7: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c7: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx8: flexcom@f8018000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8018000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8018000 0x800>; + status = "disabled"; + + uart8: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c8: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx0: flexcom@f801c000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf801c000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf801c000 0x800>; + status = "disabled"; + + uart0: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + spi0: spi@400 { + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c0: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx1: flexcom@f8020000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8020000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8020000 0x800>; + status = "disabled"; + + uart1: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + spi1: spi@400 { + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c1: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx2: flexcom@f8024000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8024000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8024000 0x800>; + status = "disabled"; + + uart2: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(4))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + spi2: spi@400 { + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(4))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c2: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(4))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx3: flexcom@f8028000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8028000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8028000 0x800>; + status = "disabled"; + + uart3: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + spi3: spi@400 { + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c3: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + gmac: ethernet@f802c000 { + compatible = "microchip,sam9x7-gem"; + reg = <0xf802c000 0x1000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 0 */ + 60 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 1 */ + 61 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 2 */ + 62 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 3 */ + 63 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 4 */ + 64 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 5 */ + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + + flx9: flexcom@f8040000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8040000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8040000 0x800>; + status = "disabled"; + + uart9: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c9: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx10: flexcom@f8044000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8044000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8044000 0x800>; + status = "disabled"; + + uart10: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(21))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c10: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(21))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + xisc: xisc@f8048000 { + compatible = "microchip,sama7g5-isc"; + reg = <0xf8048000 0x2000>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; + clock-names = "hclock"; + #clock-cells = <0>; + clock-output-names = "isc-mck"; + status = "disabled"; + + port { + xisc_in: endpoint { + bus-width = <14>; + hsync-active = <1>; + vsync-active = <1>; + remote-endpoint = <&csi2dc_out>; + }; + }; + }; + + sfr: sfr@f8050000 { + compatible = "microchip,sam9x60-sfr", "syscon"; + reg = <0xf8050000 0x100>; + }; + + csi2host: csi2host@f8058000 { + compatible = "snps,dw-csi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xf8058000 0x7FF>; + interrupts = ; + clocks = <&pmc PMC_TYPE_PERIPHERAL 53>, <&pmc PMC_TYPE_GCK 55>; + clock-names = "perclk", "phyclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 55>; + assigned-clock-rates = <26600000>; + snps,output-type = <1>; + phys = <&csi_dphy>; + status = "disabled"; + + port@1 { + reg = <1>; + csi2host_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + csi2host_out: endpoint { + }; + }; + }; + + csi_dphy: dphy@f8058040 { + compatible = "snps,dw-dphy-rx"; + #phy-cells = <0>; + bus-width = <8>; + snps,dphy-frequency = <900000>; + snps,phy_type = <0>; + reg = <0xf8058040 0x20>; + status = "disabled"; + }; + + csi2dc: csi2dc@f805c000 { + compatible = "microchip,sama7g5-csi2dc"; + reg = <0xf805c000 0x500>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&xisc>; + clock-names = "pclk", "scck"; + assigned-clocks = <&xisc>; + assigned-clock-rates = <266000000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csi2dc_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + csi2dc_out: endpoint { + bus-width = <14>; + hsync-active = <1>; + vsync-active = <1>; + remote-endpoint = <&xisc_in>; + }; + }; + }; + }; + + matrix: matrix@ffffde00 { + compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon"; + reg = <0xffffde00 0x200>; + }; + + pmecc: ecc-engine@ffffe000 { + compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc"; + reg = <0xffffe000 0x300>, + <0xffffe600 0x100>; + }; + + mpddrc: mpddrc@ffffe800 { + compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc"; + reg = <0xffffe800 0x200>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>; + clock-names = "ddrck", "mpddr"; + }; + + smc: smc@ffffea00 { + compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x100>; + }; + + aic: interrupt-controller@fffff100 { + compatible = "microchip,sam9x7-aic"; + reg = <0xfffff100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + atmel,external-irqs = <31>; + }; + + dbgu: serial@fffff200 { + compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(28))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(29))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; + clock-names = "usart"; + status = "disabled"; + }; + + pinctrl: pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-mfd"; + ranges = <0xfffff400 0xfffff400 0x800>; + + /* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */ + atmel,mux-mask = < + /* A B C D */ + 0xffffffff 0xffffefc0 0xc0ffd000 0x00000000 /* pioA */ + 0x07ffffff 0x0805fe7f 0x01ff9f80 0x06078000 /* pioB */ + 0xffffffff 0x07dfffff 0xfa3fffff 0x00000000 /* pioC */ + 0x00003fff 0x00003fe0 0x0000003f 0x00000000 /* pioD */ + >; + + pioA: gpio@fffff400 { + compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + + pioB: gpio@fffff600 { + compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <26>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; + }; + + pioC: gpio@fffff800 { + compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; + }; + + pioD: gpio@fffffa00 { + compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <22>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + }; + }; + + pmc: pmc@fffffc00 { + compatible = "microchip,sam9x7-pmc", "syscon"; + reg = <0xfffffc00 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + #clock-cells = <2>; + clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; + clock-names = "td_slck", "md_slck", "main_xtal"; + }; + + reset_controller: rstc@fffffe00 { + compatible = "microchip,sam9x60-rstc"; + reg = <0xfffffe00 0x10>; + clocks = <&clk32k 0>; + }; + + shutdown_controller: shdwc@fffffe10 { + compatible = "microchip,sam9x60-shdwc"; + reg = <0xfffffe10 0x10>; + clocks = <&clk32k 0>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + + rtt: rtc@fffffe20 { + compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; + reg = <0xfffffe20 0x20>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + }; + + clk32k: sckc@fffffe50 { + compatible = "microchip,sam9x60-sckc"; + reg = <0xfffffe50 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <1>; + }; + + gpbr: syscon@fffffe60 { + compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffe60 0x10>; + }; + + rtc: rtc@fffffea8 { + compatible = "microchip,sam9x60-rtc"; + reg = <0xfffffea8 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + }; + + watchdog: watchdog@ffffff80 { + compatible = "microchip,sam9x60-wdt"; + reg = <0xffffff80 0x24>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + status = "disabled"; + }; + }; +};