diff mbox series

[v2,08/11] arm64: dts: ti: k3-am62-wakeup: add VTM node

Message ID 20221025191515.9151-9-bb@ti.com
State Superseded
Headers show
Series None | expand

Commit Message

Bryan Brattlof Oct. 25, 2022, 7:15 p.m. UTC 
The am62x supports a single Voltage and Thermal Management (VTM) module
located in the wakeup domain with two associated temperature monitors
located in hot spots of the die.

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi | 33 +++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi  |  8 +++++
 arch/arm64/boot/dts/ti/k3-am62.dtsi         |  7 ++++-
 3 files changed, 47 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
new file mode 100644
index 0000000000000..1819a6948b19d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
@@ -0,0 +1,33 @@ 
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 4090134676cf6..3954a73a33f35 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -38,4 +38,12 @@  wkup_i2c0: i2c@2b200000 {
 		clocks = <&k3_clks 107 4>;
 		clock-names = "fck";
 	};
+
+	vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
index 37fcbe7a3c336..1795f3ee534e0 100644
--- a/arch/arm64/boot/dts/ti/k3-am62.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -80,6 +80,7 @@  cbass_main: bus@f0000 {
 			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
 
 			 /* Wakeup Domain Range */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
 			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
 			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
 
@@ -94,10 +95,14 @@  cbass_wakeup: bus@2b000000 {
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges = <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
 				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
 		};
 	};
+
+	#include "k3-am62-thermal.dtsi"
+
 };
 
 /* Now include the peripherals for each bus segments */