@@ -182,6 +182,7 @@ according to the ``struct sugov_cpu`` that utilization update belongs to.
Then ``amd-pstate`` updates the desired performance according to the CPU
scheduler assigned.
+.. _processor_support:
Processor Support
=======================
@@ -283,6 +284,8 @@ efficiency frequency management method on AMD processors.
Kernel Module Options for ``amd-pstate``
=========================================
+.. _shared_mem:
+
``shared_mem``
Use a module param (shared_mem) to enable related processors manually with
**amd_pstate.shared_mem=1**.
@@ -395,6 +398,224 @@ about part of the output. ::
CPU_006 712 116408 39 49 166 0.6769 8950227 1839034 37192089 24.06 11.272 470 2.496 kworker/6:0-1264
+Unit Tests for amd-pstate
+-------------------------
+
+``amd-pstate-ut`` is a kernel module for testing the functions of ``amd-pstate``.
+It can verify the required conditions and basic functions of ``amd-pstate`` before integration test.
+
+1. Test case decriptions
+
+ +---------+--------------------------------+------------------------------------------------------------------------------------+
+ | Index | Functions | Description |
+ +=========+================================+====================================================================================+
+ | 0 | stop || Stop the test currently in progress. |
+ | | || |
+ | | || For example: if the n test case is being executed, it needs to be completed and |
+ | | | the next test case will not be executed. |
+ +---------+--------------------------------+------------------------------------------------------------------------------------+
+ | 1 | all || Start all test cases. |
+ | | || |
+ | | || - Pass : all cases pass |
+ | | || - Fail : only one case fail |
+ +---------+--------------------------------+------------------------------------------------------------------------------------+
+ | 2 | x86_vendor || Check whether the boot CPU x86_vendor is AMD. |
+ | | || |
+ | | || - Pass : yes |
+ | | || - Fail : no |
+ +---------+--------------------------------+------------------------------------------------------------------------------------+
+ | 3 | acpi_cpc_valid || Check whether the _CPC object is present in SBIOS. |
+ | | || |
+ | | || The detail refer to `Processor Support <processor_support_>`_. |
+ | | || |
+ | | || - Pass : yes |
+ | | || - Fail : no |
+ +---------+--------------------------------+------------------------------------------------------------------------------------+
+ | 4 | modprobed_driver || Check whether cpufreq_driver module is load. |
+ | | || |
+ | | || - Pass : yes |
+ | | || - Fail : no |
+ +---------+--------------------------------+------------------------------------------------------------------------------------+
+ | 5 | capability_check || Full MSR Support: check whether cpu set feature flag :c:macro:`X86_FEATURE_CPPC`. |
+ | | || The detail refer to `Processor Support <processor_support_>`_. |
+ | | || |
+ | | || Shared Memory Support: check whether module param shared_mem enable |
+ | | || The detail refer to `Shared Memory <shared_mem_>`_. |
+ | | || |
+ | | || - Pass : yes |
+ | | || - Fail : no |
+ +---------+--------------------------------+------------------------------------------------------------------------------------+
+ | 6 | enable || Check whether AMD P-State is enabled. |
+ | | || |
+ | | || AMD P-States and ACPI hardware P-States always can be supported in one processor. |
+ | | | But AMD P-States has the higher priority and if it is enabled with |
+ | | | :c:macro:`MSR_AMD_CPPC_ENABLE` or ``cppc_set_enable``, it will respond to the |
+ | | | request from AMD P-States. |
+ | | || |
+ | | || - Pass : yes |
+ | | || - Fail : no |
+ +---------+--------------------------------+------------------------------------------------------------------------------------+
+ | 7 | init_perf || Check whether AMD P-State init perf sucessfully. |
+ | | | Include highest_perf, nominal_perf, lowest_nonlinear_perf and lowest_perf values. |
+ | | || |
+ | | || - Pass : yes |
+ | | || - Fail : no |
+ +---------+--------------------------------+------------------------------------------------------------------------------------+
+ | 8 | support_boost || Check whether all cpus support boost. |
+ | | || |
+ | | || If boost is not active but supported, this maximum frequency will be larger than |
+ | | | the one in ``cpuinfo``. |
+ | | || |
+ | | || - Pass : yes |
+ | | || - Fail : only one cpu not suppport boost |
+ +---------+--------------------------------+------------------------------------------------------------------------------------+
+ | 9 | clear_status || Clear all test results. |
+ | | || |
+ | | || **This test case is always at the end and cannot be changed.** |
+ +---------+--------------------------------+------------------------------------------------------------------------------------+
+
+#. How to execute the tests
+
+ a. Build ::
+
+ jasminemeng@jasmine-meng:~/amd-brahma$ cd linux
+ jasminemeng@jasmine-meng:~/amd-brahma/linux$ make modules M=tools/power/cpupower/debug/kernel/
+ CC [M] tools/power/cpupower/debug/kernel/amd_pstate_ut.o
+ MODPOST tools/power/cpupower/debug/kernel/Module.symvers
+ CC [M] tools/power/cpupower/debug/kernel/amd_pstate_ut.mod.o
+ LD [M] tools/power/cpupower/debug/kernel/amd_pstate_ut.ko
+
+
+ #. Installation & Steps
+
+ Test all cases ::
+
+ jasmine@jasmine-MayanDAP-RMB:~$ sudo insmod amd_pstate_ut.ko
+ jasmine@jasmine-MayanDAP-RMB:~$ cd /sys/module/amd_pstate_ut/parameters/
+ jasmine@jasmine-MayanDAP-RMB:/sys/module/amd_pstate_ut/parameters$ sudo chmod 666 unit_test
+ jasmine@jasmine-MayanDAP-RMB:/sys/module/amd_pstate_ut/parameters$ cat unit_test
+ Index Test cases Status
+ 0 stop [ ]
+ 1 all [ ]
+ 2 x86_vendor [ ]
+ 3 acpi_cpc_valid [ ]
+ 4 modprobed_driver [ ]
+ 5 capability_check [ ]
+ 6 enable [ ]
+ 7 init_perf [ ]
+ 8 support_boost [ ]
+ 9 clear_status [ ]
+ ------------------------------------------
+ begin_index = 0 end_index= 0
+ jasmine@jasmine-MayanDAP-RMB:/sys/module/amd_pstate_ut/parameters$ echo 1 > unit_test
+ jasmine@jasmine-MayanDAP-RMB:/sys/module/amd_pstate_ut/parameters$ cat unit_test
+ Index Test cases Status
+ 0 stop [ ]
+ 1 all [P]
+ 2 x86_vendor [P]
+ 3 acpi_cpc_valid [P]
+ 4 modprobed_driver [P]
+ 5 capability_check [P]
+ 6 enable [P]
+ 7 init_perf [P]
+ 8 support_boost [P]
+ 9 clear_status [ ]
+ ------------------------------------------
+ begin_index = 1 end_index= 8
+
+ Clear test resut ::
+
+ jasmine@jasmine-MayanDAP-RMB:/sys/module/amd_pstate_ut/parameters$ echo 9 > unit_test
+ jasmine@jasmine-MayanDAP-RMB:/sys/module/amd_pstate_ut/parameters$ cat unit_test
+ Index Test cases Status
+ 0 stop [ ]
+ 1 all [ ]
+ 2 x86_vendor [ ]
+ 3 acpi_cpc_valid [ ]
+ 4 modprobed_driver [ ]
+ 5 capability_check [ ]
+ 6 enable [ ]
+ 7 init_perf [ ]
+ 8 support_boost [ ]
+ ------------------------------------------
+ begin_index = 0 end_index= 0
+
+ Test specific case ::
+
+ jasmine@jasmine-MayanDAP-RMB:/sys/module/amd_pstate_ut/parameters$ echo 3 > unit_test
+ jasmine@jasmine-MayanDAP-RMB:/sys/module/amd_pstate_ut/parameters$ cat unit_test
+ Index Test cases Status
+ 0 stop [ ]
+ 1 all [ ]
+ 2 x86_vendor [ ]
+ 3 acpi_cpc_valid [P]
+ 4 modprobed_driver [ ]
+ 5 capability_check [ ]
+ 6 enable [ ]
+ 7 init_perf [ ]
+ 8 support_boost [ ]
+ 9 clear_status [ ]
+ ------------------------------------------
+ begin_index = 3 end_index= 3
+
+ Test some cases ::
+
+ jasmine@jasmine-MayanDAP-RMB:/sys/module/amd_pstate_ut/parameters$ echo 5 8 > unit_test
+ jasmine@jasmine-MayanDAP-RMB:/sys/module/amd_pstate_ut/parameters$ cat unit_test
+ Index Test cases Status
+ 0 stop [ ]
+ 1 all [ ]
+ 2 x86_vendor [ ]
+ 3 acpi_cpc_valid [P]
+ 4 modprobed_driver [ ]
+ 5 capability_check [P]
+ 6 enable [P]
+ 7 init_perf [P]
+ 8 support_boost [P]
+ 9 clear_status [ ]
+ ------------------------------------------
+ begin_index = 5 end_index= 8
+
+
+ #. Results
+
+ +-----------+--------------------------------+
+ | Status | Description |
+ +===========+================================+
+ | [ ] | Not test. |
+ +-----------+--------------------------------+
+ | [P] | Test pass. |
+ +-----------+--------------------------------+
+ | [F] | Test fail. |
+ +-----------+--------------------------------+
+
+ Enable all the messages in the ``amd-pstate-ut`` module. ::
+
+ jasmine@jasmine-MayanDAP-RMB:~/3_Cr$ su
+ root@jasmine-MayanDAP-RMB:# echo -n "module amd_pstate_ut +p" > /sys/kernel/debug/dynamic_debug/control
+
+ When you start to test all cases, you will get the follow logs. ::
+
+ jasmine@jasmine-MayanDAP-RMB:~$ dmesg | grep "AMD P-state UT" | tee log.txt
+ [ 732.084122] AMD P-state UT:param_set_index 1 0 result=0!
+ [ 732.084140] AMD P-state UT:!====! Begin all unit test! !====!
+ [ 732.084146] AMD P-state UT:****** Begin 2 x86_vendor ******
+ [ 732.084152] AMD P-state UT:****** End 2 x86_vendor ******
+ [ 732.084156] AMD P-state UT:****** Begin 3 acpi_cpc_valid ******
+ [ 732.084162] AMD P-state UT:****** End 3 acpi_cpc_valid ******
+ [ 732.084165] AMD P-state UT:****** Begin 4 modprobed_driver ******
+ [ 732.084168] AMD P-state UT:****** End 4 modprobed_driver ******
+ [ 732.084172] AMD P-state UT:****** Begin 5 capability_check ******
+ [ 732.084174] AMD P-state UT:****** End 5 capability_check ******
+ [ 732.084176] AMD P-state UT:****** Begin 6 enable ******
+ [ 732.084222] AMD P-state UT:****** End 6 enable ******
+ [ 732.084225] AMD P-state UT:****** Begin 7 init_perf ******
+ [ 732.085016] AMD P-state UT:****** End 7 init_perf ******
+ [ 732.085026] AMD P-state UT:****** Begin 8 support_boost ******
+ [ 732.085033] AMD P-state UT:****** End 8 support_boost ******
+ [ 732.085036] AMD P-state UT:!====! End all unit test! !====!
+
+
Reference
===========
Introduce the AMD P-State unit test module design and implementation. Signed-off-by: Meng Li <li.meng@amd.com> --- Documentation/admin-guide/pm/amd-pstate.rst | 221 ++++++++++++++++++++ 1 file changed, 221 insertions(+)