@@ -84,43 +84,6 @@ static void proc_cpufreq_output(void)
}
static int no_rounding;
-static void print_speed(unsigned long speed)
-{
- unsigned long tmp;
-
- if (no_rounding) {
- if (speed > 1000000)
- printf("%u.%06u GHz", ((unsigned int) speed/1000000),
- ((unsigned int) speed%1000000));
- else if (speed > 1000)
- printf("%u.%03u MHz", ((unsigned int) speed/1000),
- (unsigned int) (speed%1000));
- else
- printf("%lu kHz", speed);
- } else {
- if (speed > 1000000) {
- tmp = speed%10000;
- if (tmp >= 5000)
- speed += 10000;
- printf("%u.%02u GHz", ((unsigned int) speed/1000000),
- ((unsigned int) (speed%1000000)/10000));
- } else if (speed > 100000) {
- tmp = speed%1000;
- if (tmp >= 500)
- speed += 1000;
- printf("%u MHz", ((unsigned int) speed/1000));
- } else if (speed > 1000) {
- tmp = speed%100;
- if (tmp >= 50)
- speed += 100;
- printf("%u.%01u MHz", ((unsigned int) speed/1000),
- ((unsigned int) (speed%1000)/100));
- }
- }
-
- return;
-}
-
static void print_duration(unsigned long duration)
{
unsigned long tmp;
@@ -254,11 +217,11 @@ static int get_boost_mode(unsigned int cpu)
if (freqs) {
printf(_(" boost frequency steps: "));
while (freqs->next) {
- print_speed(freqs->frequency);
+ print_speed(freqs->frequency, no_rounding);
printf(", ");
freqs = freqs->next;
}
- print_speed(freqs->frequency);
+ print_speed(freqs->frequency, no_rounding);
printf("\n");
cpufreq_put_available_frequencies(freqs);
}
@@ -277,7 +240,7 @@ static int get_freq_kernel(unsigned int cpu, unsigned int human)
return -EINVAL;
}
if (human) {
- print_speed(freq);
+ print_speed(freq, no_rounding);
} else
printf("%lu", freq);
printf(_(" (asserted by call to kernel)\n"));
@@ -296,7 +259,7 @@ static int get_freq_hardware(unsigned int cpu, unsigned int human)
return -EINVAL;
}
if (human) {
- print_speed(freq);
+ print_speed(freq, no_rounding);
} else
printf("%lu", freq);
printf(_(" (asserted by call to hardware)\n"));
@@ -316,9 +279,9 @@ static int get_hardware_limits(unsigned int cpu, unsigned int human)
if (human) {
printf(_(" hardware limits: "));
- print_speed(min);
+ print_speed(min, no_rounding);
printf(" - ");
- print_speed(max);
+ print_speed(max, no_rounding);
printf("\n");
} else {
printf("%lu %lu\n", min, max);
@@ -350,9 +313,9 @@ static int get_policy(unsigned int cpu)
return -EINVAL;
}
printf(_(" current policy: frequency should be within "));
- print_speed(policy->min);
+ print_speed(policy->min, no_rounding);
printf(_(" and "));
- print_speed(policy->max);
+ print_speed(policy->max, no_rounding);
printf(".\n ");
printf(_("The governor \"%s\" may decide which speed to use\n"
@@ -436,7 +399,7 @@ static int get_freq_stats(unsigned int cpu, unsigned int human)
struct cpufreq_stats *stats = cpufreq_get_stats(cpu, &total_time);
while (stats) {
if (human) {
- print_speed(stats->frequency);
+ print_speed(stats->frequency, no_rounding);
printf(":%.2f%%",
(100.0 * stats->time_in_state) / total_time);
} else
@@ -486,11 +449,11 @@ static void debug_output_one(unsigned int cpu)
if (freqs) {
printf(_(" available frequency steps: "));
while (freqs->next) {
- print_speed(freqs->frequency);
+ print_speed(freqs->frequency, no_rounding);
printf(", ");
freqs = freqs->next;
}
- print_speed(freqs->frequency);
+ print_speed(freqs->frequency, no_rounding);
printf("\n");
cpufreq_put_available_frequencies(freqs);
}
@@ -200,5 +200,6 @@ extern struct bitmask *offline_cpus;
void get_cpustate(void);
void print_online_cpus(void);
void print_offline_cpus(void);
+void print_speed(unsigned long speed, int no_rounding);
#endif /* __CPUPOWERUTILS_HELPERS__ */
@@ -164,3 +164,43 @@ void print_offline_cpus(void)
printf(_("cpupower set operation was not performed on them\n"));
}
}
+
+/*
+ * print_speed
+ *
+ * Print the exact CPU frequency with appropriate unit
+ */
+void print_speed(unsigned long speed, int no_rounding)
+{
+ unsigned long tmp;
+
+ if (no_rounding) {
+ if (speed > 1000000)
+ printf("%u.%06u GHz", ((unsigned int)speed / 1000000),
+ ((unsigned int)speed % 1000000));
+ else if (speed > 1000)
+ printf("%u.%03u MHz", ((unsigned int)speed / 1000),
+ (unsigned int)(speed % 1000));
+ else
+ printf("%lu kHz", speed);
+ } else {
+ if (speed > 1000000) {
+ tmp = speed % 10000;
+ if (tmp >= 5000)
+ speed += 10000;
+ printf("%u.%02u GHz", ((unsigned int)speed / 1000000),
+ ((unsigned int)(speed % 1000000) / 10000));
+ } else if (speed > 100000) {
+ tmp = speed % 1000;
+ if (tmp >= 500)
+ speed += 1000;
+ printf("%u MHz", ((unsigned int)speed / 1000));
+ } else if (speed > 1000) {
+ tmp = speed % 100;
+ if (tmp >= 50)
+ speed += 100;
+ printf("%u.%01u MHz", ((unsigned int)speed / 1000),
+ ((unsigned int)(speed % 1000) / 100));
+ }
+ }
+}
The print_speed can be as a common function, and expose it into misc helper header. Then it can be used on other helper files as well. Signed-off-by: Huang Rui <ray.huang@amd.com> --- tools/power/cpupower/utils/cpufreq-info.c | 59 ++++---------------- tools/power/cpupower/utils/helpers/helpers.h | 1 + tools/power/cpupower/utils/helpers/misc.c | 40 +++++++++++++ 3 files changed, 52 insertions(+), 48 deletions(-)