@@ -7,6 +7,7 @@
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/interconnect/qcom,msm8996.h>
#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/thermal/thermal.h>
@@ -683,6 +684,15 @@ gcc: clock-controller@300000 {
clock-names = "cxo2";
};
+ bimc: interconnect@408000 {
+ compatible = "qcom,msm8996-bimc";
+ reg = <0x00408000 0x5a000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
tsens0: thermal-sensor@4a9000 {
compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
reg = <0x004a9000 0x1000>, /* TM */
@@ -705,6 +715,61 @@ tsens1: thermal-sensor@4ad000 {
#thermal-sensor-cells = <1>;
};
+ cnoc: interconnect@500000 {
+ compatible = "qcom,msm8996-cnoc";
+ reg = <0x00500000 0x1000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+ <&rpmcc RPM_SMD_CNOC_A_CLK>;
+ };
+
+ snoc: interconnect@524000 {
+ compatible = "qcom,msm8996-snoc";
+ reg = <0x00524000 0x1c000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
+ a1noc: interconnect@562000 {
+ compatible = "qcom,msm8996-a1noc";
+ reg = <0x00562000 0x5000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
+ <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
+ };
+
+ a2noc: interconnect@583000 {
+ compatible = "qcom,msm8996-a2noc";
+ reg = <0x00583000 0x7000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+ <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>;
+ };
+
+ mnoc: interconnect@5a4000 {
+ compatible = "qcom,msm8996-mnoc";
+ reg = <0x005a4000 0x1c000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a", "iface";
+ clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
+ <&rpmcc RPM_SMD_MMAXI_A_CLK>,
+ <&mmcc AHB_CLK_SRC>;
+ };
+
+ pnoc: interconnect@5c0000 {
+ compatible = "qcom,msm8996-pnoc";
+ reg = <0x005c0000 0x3000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+ <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+ };
+
tcsr_mutex_regs: syscon@740000 {
compatible = "syscon";
reg = <0x00740000 0x40000>;
@@ -784,6 +849,11 @@ mdp: mdp@901000 {
assigned-clock-rates = <300000000>,
<19200000>;
+ interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>,
+ <&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>,
+ <&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem";
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -959,6 +1029,9 @@ gpu: gpu@b00000 {
"mem",
"mem_iface";
+ interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>;
+ interconnect-names = "gfx-mem";
+
power-domains = <&mmcc GPU_GX_GDSC>;
iommus = <&adreno_smmu 0>;
@@ -1953,6 +2026,9 @@ venus: video-codec@c00000 {
<&mmcc VIDEO_AXI_CLK>,
<&mmcc VIDEO_MAXI_CLK>;
clock-names = "core", "iface", "bus", "mbus";
+ interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>,
+ <&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>;
+ interconnect-names = "video-mem", "cpu-cfg";
iommus = <&venus_smmu 0x00>,
<&venus_smmu 0x01>,
<&venus_smmu 0x0a>,
@@ -2569,6 +2645,10 @@ usb3: usb@6af8800 {
<&gcc GCC_USB30_MASTER_CLK>;
assigned-clock-rates = <19200000>, <120000000>;
+ interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>,
+ <&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
power-domains = <&gcc USB30_GDSC>;
status = "disabled";
Add interconnect providers for the multiple NoCs available on the platform, and assign interconnects used by some blocks. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> --- Changes since v2: - Remove interconnect paths from CPUs since cpufreq driver doesn't support icc scaling yet. arch/arm64/boot/dts/qcom/msm8996.dtsi | 80 +++++++++++++++++++++++++++ 1 file changed, 80 insertions(+)