@@ -39,6 +39,7 @@
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_opp.h>
+#include <linux/pm_runtime.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
#include <linux/reset.h>
@@ -505,6 +506,104 @@ static void tegra_pmc_scratch_writel(struct tegra_pmc *pmc, u32 value,
writel(value, pmc->scratch + offset);
}
+static const char * const tegra_pd_no_perf_compats[] = {
+ "nvidia,tegra20-sclk",
+ "nvidia,tegra30-sclk",
+ "nvidia,tegra30-pllc",
+ "nvidia,tegra30-plle",
+ "nvidia,tegra30-pllm",
+ "nvidia,tegra20-dc",
+ "nvidia,tegra30-dc",
+ "nvidia,tegra20-emc",
+ "nvidia,tegra30-emc",
+ NULL,
+};
+
+static int
+tegra_pmc_pd_dev_get_performance_state(struct generic_pm_domain *genpd,
+ struct device *dev)
+{
+ struct opp_table *hw_opp_table, *clk_opp_table;
+ struct dev_pm_opp *opp;
+ u32 hw_version;
+ int ret;
+
+ /*
+ * The EMC devices are a special case because we have a protection
+ * from non-EMC drivers getting clock handle before EMC driver is
+ * fully initialized. The goal of the protection is to prevent
+ * devfreq driver from getting failures if it will try to change
+ * EMC clock rate until clock is fully initialized. The EMC drivers
+ * will initialize the performance state by themselves.
+ *
+ * Display controller also is a special case because only controller
+ * driver could get the clock rate based on configuration of internal
+ * divider.
+ *
+ * Clock driver uses its own state syncing.
+ */
+ if (of_device_compatible_match(dev->of_node, tegra_pd_no_perf_compats))
+ return 0;
+
+ if (of_machine_is_compatible("nvidia,tegra20"))
+ hw_version = BIT(tegra_sku_info.soc_process_id);
+ else
+ hw_version = BIT(tegra_sku_info.soc_speedo_id);
+
+ hw_opp_table = dev_pm_opp_set_supported_hw(dev, &hw_version, 1);
+ if (IS_ERR(hw_opp_table)) {
+ dev_err(dev, "failed to set OPP supported HW: %pe\n",
+ hw_opp_table);
+ return PTR_ERR(hw_opp_table);
+ }
+
+ /*
+ * Older device-trees don't have OPPs, meanwhile drivers use
+ * dev_pm_opp_set_rate() and it requires OPP table to be set
+ * up using dev_pm_opp_set_clkname().
+ *
+ * The devm_tegra_core_dev_init_opp_table() is a common helper
+ * that sets up OPP table for Tegra drivers and it sets the clk
+ * for compatibility with older device-tress. GR3D driver uses that
+ * helper, it also uses devm_pm_opp_attach_genpd() to manually attach
+ * power domains, which now holds the reference to OPP table that
+ * already has clk set up implicitly by OPP core for a newly created
+ * table using dev_pm_opp_of_add_table() invoked below.
+ *
+ * Hence we need to explicitly set/put the clk, otherwise
+ * further dev_pm_opp_set_clkname() will fail with -EBUSY.
+ */
+ clk_opp_table = dev_pm_opp_set_clkname(dev, NULL);
+ if (IS_ERR(clk_opp_table)) {
+ dev_err(dev, "failed to set OPP clk: %pe\n", clk_opp_table);
+ ret = PTR_ERR(clk_opp_table);
+ goto put_hw;
+ }
+
+ ret = dev_pm_opp_of_add_table(dev);
+ if (ret) {
+ dev_err(dev, "failed to add OPP table: %d\n", ret);
+ goto put_clk;
+ }
+
+ opp = dev_pm_opp_get_current(dev);
+ if (IS_ERR(opp)) {
+ dev_err(dev, "failed to get current OPP: %pe\n", opp);
+ ret = PTR_ERR(opp);
+ } else {
+ ret = dev_pm_opp_get_required_pstate(opp, 0);
+ dev_pm_opp_put(opp);
+ }
+
+ dev_pm_opp_of_remove_table(dev);
+put_clk:
+ dev_pm_opp_put_clkname(clk_opp_table);
+put_hw:
+ dev_pm_opp_put_supported_hw(hw_opp_table);
+
+ return ret;
+}
+
/*
* TODO Figure out a way to call this with the struct tegra_pmc * passed in.
* This currently doesn't work because readx_poll_timeout() can only operate
@@ -1237,6 +1336,7 @@ static int tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np)
pg->id = id;
pg->genpd.name = np->name;
+ pg->genpd.dev_get_performance_state = tegra_pmc_pd_dev_get_performance_state;
pg->genpd.power_off = tegra_genpd_power_off;
pg->genpd.power_on = tegra_genpd_power_on;
pg->pmc = pmc;
@@ -1355,6 +1455,7 @@ static int tegra_pmc_core_pd_add(struct tegra_pmc *pmc, struct device_node *np)
genpd->name = np->name;
genpd->set_performance_state = tegra_pmc_core_pd_set_performance_state;
genpd->opp_to_performance_state = tegra_pmc_core_pd_opp_to_performance_state;
+ genpd->dev_get_performance_state = tegra_pmc_pd_dev_get_performance_state;
err = devm_pm_opp_set_regulators(pmc->dev, &rname, 1);
if (err)
Implement dev_get_performance_state() callback of the power domains to pre-initialize theirs performance (voltage) state in accordance to the clock rate of attached devices. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- drivers/soc/tegra/pmc.c | 101 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 101 insertions(+)