@@ -23,34 +23,34 @@
#include <linux/seq_file.h>
#include <asm/unaligned.h>
-#define PS_STAT_VBUS_TRIGGER (1 << 0)
-#define PS_STAT_BAT_CHRG_DIR (1 << 2)
-#define PS_STAT_VBAT_ABOVE_VHOLD (1 << 3)
-#define PS_STAT_VBUS_VALID (1 << 4)
-#define PS_STAT_VBUS_PRESENT (1 << 5)
+#define PS_STAT_VBUS_TRIGGER (1 << 0)
+#define PS_STAT_BAT_CHRG_DIR (1 << 2)
+#define PS_STAT_VBAT_ABOVE_VHOLD (1 << 3)
+#define PS_STAT_VBUS_VALID (1 << 4)
+#define PS_STAT_VBUS_PRESENT (1 << 5)
-#define CHRG_STAT_BAT_SAFE_MODE (1 << 3)
+#define CHRG_STAT_BAT_SAFE_MODE (1 << 3)
#define CHRG_STAT_BAT_VALID (1 << 4)
-#define CHRG_STAT_BAT_PRESENT (1 << 5)
+#define CHRG_STAT_BAT_PRESENT (1 << 5)
#define CHRG_STAT_CHARGING (1 << 6)
#define CHRG_STAT_PMIC_OTP (1 << 7)
#define CHRG_CCCV_CC_MASK 0xf /* 4 bits */
-#define CHRG_CCCV_CC_BIT_POS 0
+#define CHRG_CCCV_CC_BIT_POS 0
#define CHRG_CCCV_CC_OFFSET 200 /* 200mA */
-#define CHRG_CCCV_CC_LSB_RES 200 /* 200mA */
+#define CHRG_CCCV_CC_LSB_RES 200 /* 200mA */
#define CHRG_CCCV_ITERM_20P (1 << 4) /* 20% of CC */
#define CHRG_CCCV_CV_MASK 0x60 /* 2 bits */
-#define CHRG_CCCV_CV_BIT_POS 5
+#define CHRG_CCCV_CV_BIT_POS 5
#define CHRG_CCCV_CV_4100MV 0x0 /* 4.10V */
#define CHRG_CCCV_CV_4150MV 0x1 /* 4.15V */
#define CHRG_CCCV_CV_4200MV 0x2 /* 4.20V */
#define CHRG_CCCV_CV_4350MV 0x3 /* 4.35V */
#define CHRG_CCCV_CHG_EN (1 << 7)
-#define FG_CNTL_OCV_ADJ_STAT (1 << 2)
+#define FG_CNTL_OCV_ADJ_STAT (1 << 2)
#define FG_CNTL_OCV_ADJ_EN (1 << 3)
-#define FG_CNTL_CAP_ADJ_STAT (1 << 4)
+#define FG_CNTL_CAP_ADJ_STAT (1 << 4)
#define FG_CNTL_CAP_ADJ_EN (1 << 5)
#define FG_CNTL_CC_EN (1 << 6)
#define FG_CNTL_GAUGE_EN (1 << 7)
@@ -71,23 +71,23 @@
#define FG_CC_CAP_VALID (1 << 7)
#define FG_CC_CAP_VAL_MASK 0x7F
-#define FG_LOW_CAP_THR1_MASK 0xf0 /* 5% tp 20% */
+#define FG_LOW_CAP_THR1_MASK 0xf0 /* 5% tp 20% */
#define FG_LOW_CAP_THR1_VAL 0xa0 /* 15 perc */
-#define FG_LOW_CAP_THR2_MASK 0x0f /* 0% to 15% */
+#define FG_LOW_CAP_THR2_MASK 0x0f /* 0% to 15% */
#define FG_LOW_CAP_WARN_THR 14 /* 14 perc */
#define FG_LOW_CAP_CRIT_THR 4 /* 4 perc */
#define FG_LOW_CAP_SHDN_THR 0 /* 0 perc */
-#define NR_RETRY_CNT 3
-#define DEV_NAME "axp288_fuel_gauge"
+#define NR_RETRY_CNT 3
+#define DEV_NAME "axp288_fuel_gauge"
/* 1.1mV per LSB expressed in uV */
#define VOLTAGE_FROM_ADC(a) ((a * 11) / 10)
/* properties converted to uV, uA */
-#define PROP_VOLT(a) ((a) * 1000)
-#define PROP_CURR(a) ((a) * 1000)
+#define PROP_VOLT(a) ((a) * 1000)
+#define PROP_CURR(a) ((a) * 1000)
-#define AXP288_FG_INTR_NUM 6
+#define AXP288_FG_INTR_NUM 6
enum {
QWBTU_IRQ = 0,
WBTU_IRQ,
The values of various defines used in the driver are not aligned properly when tabsize is set to 8 (I guess they were created with a different tabsize). Properly align the defines to make the code easier to read. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/power/supply/axp288_fuel_gauge.c | 38 ++++++++++++------------ 1 file changed, 19 insertions(+), 19 deletions(-)