@@ -3,9 +3,16 @@
* Copyright (C) 2014 NVIDIA CORPORATION. All rights reserved.
*/
+#define dev_fmt(fmt) "tegra-soc: " fmt
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/export.h>
#include <linux/of.h>
+#include <linux/pm_opp.h>
#include <soc/tegra/common.h>
+#include <soc/tegra/fuse.h>
static const struct of_device_id tegra_machine_match[] = {
{ .compatible = "nvidia,tegra20", },
@@ -31,3 +38,134 @@ bool soc_is_tegra(void)
return match != NULL;
}
+
+static int tegra_core_dev_init_opp_state(struct device *dev)
+{
+ struct dev_pm_opp *opp;
+ unsigned long rate;
+ struct clk *clk;
+ int err;
+
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to get clk: %pe\n", clk);
+ return PTR_ERR(clk);
+ }
+
+ /*
+ * If voltage regulator presents, then we could select the fastest
+ * clock rate, but driver doesn't support power management and
+ * frequency scaling yet, hence the top freq OPP will vote for a
+ * very high voltage that will produce lot's of heat. Let's select
+ * OPP for the current/default rate for now.
+ *
+ * Clock rate should be pre-initialized (i.e. it's non-zero) either
+ * by clock driver or by assigned clocks in a device-tree.
+ */
+ rate = clk_get_rate(clk);
+ if (!rate) {
+ dev_err(dev, "failed to get clk rate\n");
+ return -EINVAL;
+ }
+
+ /* find suitable OPP for the clock rate and supportable by hardware */
+ opp = dev_pm_opp_find_freq_ceil(dev, &rate);
+
+ /*
+ * dev_pm_opp_set_rate() doesn't search for a floor clock rate and it
+ * will error out if default clock rate is too high, i.e. unsupported
+ * by a SoC hardware version. Hence will find floor rate by ourselves.
+ */
+ if (opp == ERR_PTR(-ERANGE))
+ opp = dev_pm_opp_find_freq_floor(dev, &rate);
+
+ err = PTR_ERR_OR_ZERO(opp);
+ if (err) {
+ dev_err(dev, "failed to get OPP for %ld Hz: %d\n",
+ rate, err);
+ return err;
+ }
+
+ dev_pm_opp_put(opp);
+
+ /*
+ * First dummy rate-set initializes voltage vote by setting voltage
+ * in accordance to the clock rate. We need to do this because some
+ * drivers currently don't support power management and clock is
+ * permanently enabled.
+ */
+ err = dev_pm_opp_set_rate(dev, rate);
+ if (err) {
+ dev_err(dev, "failed to initialize OPP clock: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * devm_tegra_core_dev_init_opp_table() - initialize OPP table
+ * @dev: device for which OPP table is initialized
+ * @params: pointer to the OPP table configuration
+ *
+ * This function will initialize OPP table and sync OPP state of a Tegra SoC
+ * core device.
+ *
+ * Return: 0 on success or errorno.
+ */
+int devm_tegra_core_dev_init_opp_table(struct device *dev,
+ struct tegra_core_opp_params *params)
+{
+ struct opp_table *opp_table;
+ u32 hw_version;
+ int err;
+
+ opp_table = devm_pm_opp_set_clkname(dev, NULL);
+ if (IS_ERR(opp_table)) {
+ dev_err(dev, "failed to set OPP clk %pe\n", opp_table);
+ return PTR_ERR(opp_table);
+ }
+
+ /* Tegra114+ doesn't support OPP yet */
+ if (!of_machine_is_compatible("nvidia,tegra20") &&
+ !of_machine_is_compatible("nvidia,tegra30"))
+ return -ENODEV;
+
+ if (of_machine_is_compatible("nvidia,tegra20"))
+ hw_version = BIT(tegra_sku_info.soc_process_id);
+ else
+ hw_version = BIT(tegra_sku_info.soc_speedo_id);
+
+ opp_table = devm_pm_opp_set_supported_hw(dev, &hw_version, 1);
+ if (IS_ERR(opp_table)) {
+ dev_err(dev, "failed to set OPP supported HW: %pe\n", opp_table);
+ return PTR_ERR(opp_table);
+ }
+
+ /*
+ * Older device-trees have an empty OPP table, hence we will get
+ * -ENODEV from devm_pm_opp_of_add_table() for the older DTBs.
+ *
+ * The OPP table presence also varies per-device and depending
+ * on a SoC generation, hence -ENODEV is expected to happen for
+ * the newer DTs as well.
+ */
+ err = devm_pm_opp_of_add_table(dev);
+ if (err) {
+ if (err == -ENODEV)
+ dev_err_once(dev, "OPP table not found, please update device-tree\n");
+ else
+ dev_err(dev, "failed to add OPP table: %d\n", err);
+
+ return err;
+ }
+
+ if (params->init_state) {
+ err = tegra_core_dev_init_opp_state(dev);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(devm_tegra_core_dev_init_opp_table);
@@ -6,6 +6,36 @@
#ifndef __SOC_TEGRA_COMMON_H__
#define __SOC_TEGRA_COMMON_H__
+#include <linux/errno.h>
+#include <linux/types.h>
+
+struct device;
+
+/**
+ * Tegra SoC core device OPP table configuration
+ *
+ * @init_state: pre-initialize OPP state of a device
+ */
+struct tegra_core_opp_params {
+ bool init_state;
+};
+
+#ifdef CONFIG_ARCH_TEGRA
bool soc_is_tegra(void);
+int devm_tegra_core_dev_init_opp_table(struct device *dev,
+ struct tegra_core_opp_params *params);
+#else
+static inline bool soc_is_tegra(void)
+{
+ return false;
+}
+
+static inline int
+devm_tegra_core_dev_init_opp_table(struct device *dev,
+ struct tegra_core_opp_params *params)
+{
+ return -ENODEV;
+}
+#endif
#endif /* __SOC_TEGRA_COMMON_H__ */