@@ -129,10 +129,9 @@ config POWER_RESET_QCOM_PON
config POWER_RESET_OCELOT_RESET
bool "Microsemi Ocelot reset driver"
- depends on MSCC_OCELOT || COMPILE_TEST
select MFD_SYSCON
help
- This driver supports restart for Microsemi Ocelot SoC.
+ This driver supports restart for Microsemi Ocelot SoC and similar.
config POWER_RESET_OXNAS
bool "OXNAS SoC restart driver"
@@ -15,15 +15,20 @@
#include <linux/reboot.h>
#include <linux/regmap.h>
+struct reset_props {
+ const char *syscon;
+ u32 protect_reg;
+ u32 vcore_protect;
+ u32 if_si_owner_bit;
+};
+
struct ocelot_reset_context {
void __iomem *base;
struct regmap *cpu_ctrl;
+ const struct reset_props *props;
struct notifier_block restart_handler;
};
-#define ICPU_CFG_CPU_SYSTEM_CTRL_RESET 0x20
-#define CORE_RST_PROTECT BIT(2)
-
#define SOFT_CHIP_RST BIT(0)
#define ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL 0x24
@@ -31,7 +36,6 @@ struct ocelot_reset_context {
#define IF_SI_OWNER_SISL 0
#define IF_SI_OWNER_SIBM 1
#define IF_SI_OWNER_SIMC 2
-#define IF_SI_OWNER_OFFSET 4
static int ocelot_restart_handle(struct notifier_block *this,
unsigned long mode, void *cmd)
@@ -39,15 +43,18 @@ static int ocelot_restart_handle(struct notifier_block *this,
struct ocelot_reset_context *ctx = container_of(this, struct
ocelot_reset_context,
restart_handler);
+ u32 if_si_owner_bit = ctx->props->if_si_owner_bit;
/* Make sure the core is not protected from reset */
- regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_RESET,
- CORE_RST_PROTECT, 0);
+ regmap_update_bits(ctx->cpu_ctrl, ctx->props->protect_reg,
+ ctx->props->vcore_protect, 0);
/* Make the SI back to boot mode */
regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL,
- IF_SI_OWNER_MASK << IF_SI_OWNER_OFFSET,
- IF_SI_OWNER_SIBM << IF_SI_OWNER_OFFSET);
+ IF_SI_OWNER_MASK << if_si_owner_bit,
+ IF_SI_OWNER_SIBM << if_si_owner_bit);
+
+ pr_emerg("Resetting SoC\n");
writel(SOFT_CHIP_RST, ctx->base);
@@ -72,9 +79,13 @@ static int ocelot_reset_probe(struct platform_device *pdev)
if (IS_ERR(ctx->base))
return PTR_ERR(ctx->base);
- ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible("mscc,ocelot-cpu-syscon");
- if (IS_ERR(ctx->cpu_ctrl))
+ ctx->props = device_get_match_data(dev);
+
+ ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible(ctx->props->syscon);
+ if (IS_ERR(ctx->cpu_ctrl)) {
+ dev_err(dev, "No syscon map: %s\n", ctx->props->syscon);
return PTR_ERR(ctx->cpu_ctrl);
+ }
ctx->restart_handler.notifier_call = ocelot_restart_handle;
ctx->restart_handler.priority = 192;
@@ -85,9 +96,29 @@ static int ocelot_reset_probe(struct platform_device *pdev)
return err;
}
+static const struct reset_props reset_props_ocelot = {
+ .syscon = "mscc,ocelot-cpu-syscon",
+ .protect_reg = 0x20,
+ .vcore_protect = BIT(2),
+ .if_si_owner_bit = 4,
+};
+
+static const struct reset_props reset_props_sparx5 = {
+ .syscon = "microchip,sparx5-cpu-syscon",
+ .protect_reg = 0x84,
+ .vcore_protect = BIT(10),
+ .if_si_owner_bit = 6,
+};
+
static const struct of_device_id ocelot_reset_of_match[] = {
- { .compatible = "mscc,ocelot-chip-reset" },
- {}
+ {
+ .compatible = "mscc,ocelot-chip-reset",
+ .data = &reset_props_ocelot
+ }, {
+ .compatible = "microchip,sparx5-chip-reset",
+ .data = &reset_props_sparx5
+ },
+ { /*sentinel*/ }
};
static struct platform_driver ocelot_reset_driver = {
This adds reset support for Sparx5 in the ocelot-reset driver. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> --- drivers/power/reset/Kconfig | 3 +- drivers/power/reset/ocelot-reset.c | 55 +++++++++++++++++++++++------- 2 files changed, 44 insertions(+), 14 deletions(-) -- 2.25.1