| Message ID | 1654139515-8177-3-git-send-email-quic_kriskura@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | USB DWC3 host wake up support from system suspend | expand |
Hi Krishna, On Thu, Jun 02, 2022 at 08:41:52AM +0530, Krishna Kurapati wrote: > From: Sandeep Maheswaram <quic_c_sanm@quicinc.com> > > Check wakeup-source property for dwc3 core node to set the > wakeup capability. Drop the device_init_wakeup call from > runtime suspend and resume. > > If the dwc3 is wakeup capable, don't power down the USB PHY(s). > The glue drivers are expected to take care of configuring the > additional wakeup settings if needed based on the dwc3 wakeup > capability status. In some SOC designs, powering off the PHY is > resulting in higher leakage, so this patch save power on such boards. > > Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com> > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > Reviewed-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> > --- > drivers/usb/dwc3/core.c | 10 +++------- > 1 file changed, 3 insertions(+), 7 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index e027c04..c9d7fe3 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -1787,6 +1787,7 @@ static int dwc3_probe(struct platform_device *pdev) > > platform_set_drvdata(pdev, dwc); > dwc3_cache_hwparams(dwc); > + device_init_wakeup(&pdev->dev, of_property_read_bool(dev->of_node, "wakeup-source")); > > spin_lock_init(&dwc->lock); > mutex_init(&dwc->mutex); > @@ -1948,7 +1949,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) > dwc3_core_exit(dwc); > break; > case DWC3_GCTL_PRTCAP_HOST: > - if (!PMSG_IS_AUTO(msg)) { > + if (!PMSG_IS_AUTO(msg) && !device_can_wakeup(dwc->dev)) { > dwc3_core_exit(dwc); > break; > } > @@ -2009,12 +2010,11 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) > spin_unlock_irqrestore(&dwc->lock, flags); > break; > case DWC3_GCTL_PRTCAP_HOST: > - if (!PMSG_IS_AUTO(msg)) { > + if (!PMSG_IS_AUTO(msg) && !device_can_wakeup(dwc->dev)) { > ret = dwc3_core_init_for_resume(dwc); > if (ret) > return ret; > dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); > - break; > } We should break here for the case the device does not support wakeup and PM transition is system suspend. See the suspend block above where we break correctly. Thanks, Pavan
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index e027c04..c9d7fe3 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1787,6 +1787,7 @@ static int dwc3_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dwc); dwc3_cache_hwparams(dwc); + device_init_wakeup(&pdev->dev, of_property_read_bool(dev->of_node, "wakeup-source")); spin_lock_init(&dwc->lock); mutex_init(&dwc->mutex); @@ -1948,7 +1949,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) dwc3_core_exit(dwc); break; case DWC3_GCTL_PRTCAP_HOST: - if (!PMSG_IS_AUTO(msg)) { + if (!PMSG_IS_AUTO(msg) && !device_can_wakeup(dwc->dev)) { dwc3_core_exit(dwc); break; } @@ -2009,12 +2010,11 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) spin_unlock_irqrestore(&dwc->lock, flags); break; case DWC3_GCTL_PRTCAP_HOST: - if (!PMSG_IS_AUTO(msg)) { + if (!PMSG_IS_AUTO(msg) && !device_can_wakeup(dwc->dev)) { ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); - break; } /* Restore GUSB2PHYCFG bits that were modified in suspend */ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); @@ -2086,8 +2086,6 @@ static int dwc3_runtime_suspend(struct device *dev) if (ret) return ret; - device_init_wakeup(dev, true); - return 0; } @@ -2096,8 +2094,6 @@ static int dwc3_runtime_resume(struct device *dev) struct dwc3 *dwc = dev_get_drvdata(dev); int ret; - device_init_wakeup(dev, false); - ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME); if (ret) return ret;